LG LCD TV 32LK330 User Manual
Have a look at the manual LG LCD TV 32LK330 User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 1069 LG manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
81 ENGENGLISH MAKING CONNECTIONS yyThis part of MAKING CONNECTIONS mainly uses picture for PW350, LV3500 series. Connecting to a HD receiver, DVD or VCR player Connect a HD receiver, DVD, or VCR player to the TV and select an appropriate input mode. HDMI Connection Transmits the digital video and audio signals from an external device to the TV. Connect the external device and the TV with the HDMI cable as shown in the following illustration. NOTE yyUse the latest High Speed HDMI™ Cable with CEC (Customer Electronics Control) function. yyHigh Speed HDMI™ Cables are tested to carry an HD signal up to 1080p and higher. PW350 series COMPONENT IN VIDEOAUDIO YLPBPRR RGB IN (PC)AUDIO IN(RGB/DVI) ANTENNA/CABLEINRS-232C IN( CONTROL & SERVIC E\f REMOTECONTROL IN OPTICALDI\bITALAUDIO OU TAV IN 1 1 /DVI IN VIDEOAUDIOL/MONOOORRR2 1 2 HDMI LV3500 series IN 3 USB IN LANOPTICAL DIGITALAUDI O OUTPTICAL DIGITTICAL DIGITANTENNA/CABLE INANTENNAANTENNA H/PANTENNA /CABLE INRS-232C IN(CONT ROL & SER VICE\f RGB IN(PC\f (RG B/DV I\fA\bDIO INOPTIC ALDIGIT ALA\bDIO O\bT 12 VIDEO A\bDIO COMPONENT INYPBPR RL VIDEO AUDIORR AV IN 1 / DVI IN21 L/MONOAV IN 2VIDEO / AUDIO HDMI DVI to HDMI Connection Transmits the digital video signal from an external device to the TV. Connect the external device and the TV with the DVI-HDMI cable as shown in the following illustration. To transmit an audio signal, connect an audio cable. PW350 series COMPONENT IN VIDEOAUDIO YLPBPRR RGB IN (PC)AUDIO IN(RGB/DVI) ANTENNA/CABLEINR\f-232C IN(CONTROL \b \fERVIC E) REMOTECONTROL IN OPTICALDIGITALAUDIO OUTAV IN 1 1 /DVI IN VIDEOAUDIOL/MONOOORRR2 1 2 AUDIO IN(RGB/DVI ) AUDIO OUT DVI OUT LV3500 series IN 3 USB IN LANOPTICAL DIGITALAUDI O OUTPTICAL DIGITTICAL DIGIT H/P ANTENNA /CABLE INRS-232C IN(C ONT ROL \f SER VICE) RGB IN(PC ) (RGB/\bVI )AU\bIO INOPTICAL\bIGIT ALAU\bIO OUT 12 VI\bEO AU\bIO COMPONENT INYPBPR RL VIDEO AUDIORR AV IN 1 / DVI IN21 L/MONOAV IN 2VIDEO / AUDIO AUDIO OUT DVI OUT IN 3 USB IN LANO\fTICAL DIGITAL AUDIO OUTANTENNA/ CABLE IN AV IN 2AUDIO / VIDE O H/\fANTENNA INCABLEINRS\b232C IN(CONTROL & SERVICE) RGB IN (\fC) (RGB/DVI ) A UDIO INO\fTICAL D IGIT AL A UDIO OU T 1 2 VIDEO AUDIO COMPONENT INY\fB\fR R L VIDEO AUDIOL(MONO) R AV IN 1 / DVI IN2 1 (RGB/DVI) A UDIO IN
8\f ENGENGLISH MAKING CONNECTIONS Component Connection Transmits the analog video and audio signals from an external device to the TV. Connect the external device and the TV with the component cable as shown in the following illustration. PW350 series COMPONENT IN VIDEOAUDIO YLPBPRR RGB IN (PC)AUDIO IN(RGB/DVI) ANTENNA/CABLEINRS\f232C IN(CONTROL & SERVICE) RE\bOTECONTROL IN OPTICALDIGITALAUDIO OUTAV IN 1 1 /DVI IN VIDEOAUDIOL/\bONOOORRR2 1 2Y L PBPRR VIDEOAUDIO L R LV3500 series IN 3 USB IN LANOPTICAL DIGITALAUDI O OUTPTICAL DIGITTICAL DIGITANTENNA/CABLE INANTENNAANTENNA H/P ANTENNA /CABLE INRS-232C IN(C ONT ROL \f SER VICE) RGB IN(PC ) (RGB/\bVI )AU\bIO INOPT ICAL\bIGITALAU\bIO OUT 12 VI\bEO AU\bIO COMPONENT INYPBPR RL VIDEO AUDIOR AV IN 1 / DVI IN21 L/MONOAV IN 2VIDEO / AUDIO VIDEOAUDIO L R YPBPR R L NOTE yyIf cables are installed incorrectly, it could case the image to display in black and white or with distorted color. Check to ensure the cable are matched with the corresponding color connection. Composite Connection Transmits the analog video and audio signals from an external device to the TV. Connect the external device and the TV with the composite cable as shown in the following illustration. NOTE yyIf you have a mono VCR, connect the audio cable from the VCR to the AUDIO L/MONO jack of the TV. PW350 series COMPONENT IN VIDEOAUDIO YLPBPRR RGB IN (PC)AUDIO IN(RGB/DVI) ANTENNA/CABLEINR\f-232C IN(CONTROL \b \fERVIC E) REMOTECONTROL IN OPTICALDIGITALAUDIO OUTAV IN 1 1 /DVI IN VIDEOAUDIOL/MONOOORRR2 1 2 AV IN 1VIDEOAUDIOL/MONOR MONO()AUDIO L RVIDEO LV3500 series IN 3 USB IN LANOPTICAL DIGITALAUDI O OUTPTICAL DIGITTICAL DIGITANTENNA/CABLE INANTENNAANTENNA H/PANTENNA /CABLE INRS-232C IN(CONT ROL \f SER VICE) RGB IN(PC) (RGB/\bV I)AU\bIO INOPTICAL\bIGIT ALAU\bIO OUT 12 VIDEO AUDIO COMPONENT INYPBPR RL VIDEO AUDIO L(MONO)RR AV IN 1 \f DVI IN21 L\fMONOAV IN 2VIDEO \f AUDIOLAN VIDEO AUDIOR AV IN 1IN 3 USB IN OPTI\bAL DIGITAL AUDIO OUTANTENNA\f \bABLE IN AV IN 2AUDIO \f VIDE O H\fPANTENNA IN\bABLEINRS-232\b IN(\bONTROL & SERVI\bE) RGB IN (P\b) (RGB\fDVI ) AUDIO INOPTI\bAL D IGIT AL A UDIO OU T 1 2 VIDEO AUDIO COMPONENT INYPBPR R L VIDEO AUDIOL(MONO) R AV IN 1 \f DVI IN2 1 AUDIO VIDEOMONO( )L R (For only 32LV2500, 32LV2520, 32LV255C, LV3500, LV3520, LV355B, LV355C, LV5300, LW5000, LW5300, LW505C series) IN 3 USB IN H/PANTENNA /CABLE INRS-232C IN(C \fNT ROL & SER VICE) RGB IN(PC) (RGB/DVI )A\fDIO INOPT ICALDIGITALA\fDIO O\fT 12 VIDEO AUDIO COMPONENT INYPBPR RL VIDEO AUDIO L(MONO) RR AV IN 1 / DVI IN\f1 L(MONO)L/MONOL(MONO)L(MONO)AV IN \fVIDEO / AUDIO VIDEOAUDIORL (MONO) AV IN \fVIDEO / AUDIO
83 ENGENGLISH MAKING CONNECTIONS Connecting to a PC NOTE yyIt is recommended to use the TV set with the HDMI connection for the best image quality. HDMI Connection Transmits the digital video and audio signals from your PC to the TV. Connect the PC and the TV with the HDMI cable as shown in the following illustration. PW350 series COMPONENT IN VIDEOAUDIO YLPBPRR RGB IN (PC)AUDIO IN(RGB/DVI) ANTENNA/CABLEINRS-232C IN(CONTROL & SERVIC E\f REMOTECONTROL IN OPTICALDI\bITALAUDIO OUTAV IN 1 1 /DVI IN VIDEOAUDIOL/MONOOORRR2 1 2 HDMI LV3500 series IN 3 USB IN LANOPTICAL DIGITALAUDI O OUTPTICAL DIGITTICAL DIGITANTENNA/CABLE INANTENNAANTENNA H/PANTENNA /CABLE INRS-232C IN(CONT ROL & SER VICE\f RGB IN(PC\f (RG B/DV I\fA\bDIO INOPTIC ALDIGIT ALA\bDIO O\bT 12 VIDEO A\bDIO COMPONENT INYPBPR RL VIDEO AUDIORR AV IN 1 / DVI IN21 L/MONOAV IN 2VIDEO / AUDIO HDMI DVI to HDMI Connection Transmits the digital video signal from your PC to the TV. Connect the PC and the TV with the DVI- HDMI cable as shown in the following illustration. To transmit an audio signal, connect an audio cable. PW350 series COMPONENT IN VIDEOAUDIO YLPBPRR RGB IN (PC)AUDIO IN(RGB/DVI) ANTENNA/CABLEINR\f-232C IN(CONTROL \b \fERVIC E) REMOTECONTROL IN OPTICALDIGITALAUDIO OUTAV IN 1 1 /DVI IN VIDEOAUDIOL/MONOOORRR2 1 2 AUDIO IN(RGB/DVI ) AUDIO OUT DVI OUT LV3500 series IN 3 USB IN LANOPTICAL DIGITALAUDI O OUTPTICAL DIGITTICAL DIGIT H/P ANTENNA /CABLE INRS-232C IN(C ONT ROL \f SER VICE) RGB IN(PC ) (RGB/\bVI )AU\bIO INOPTICAL\bIGIT ALAU\bIO OUT 12 VI\bEO AU\bIO COMPONENT INYPBPR RL VIDEO AUDIORR AV IN 1 / DVI IN21 L/MONOAV IN 2VIDEO / AUDIO AUDIO OUT DVI OUT IN 3 USB IN LANO\fTICAL DIGITAL AUDIO OUTANTENNA/ CABLE IN AV IN 2AUDIO / VIDE O H/\fANTENNA INCABLEINRS\b232C IN(CONTROL & SERVICE) RGB IN (\fC) (RGB/DVI ) A UDIO INO\fTICAL D IGIT AL A UDIO OU T 1 2 VIDEO AUDIO COMPONENT INY\fB\fR R L VIDEO AUDIOL(MONO) R AV IN 1 / DVI IN2 1 (RGB/DVI) A UDIO IN
84 ENGENGLISH MAKING CONNECTIONS RGB Connection Transmits the analog video signal from your PC to the TV. Connect the PC and the TV with the D-sub 15 pin signal cable as shown in the following illustrations. To transmit an audio signal, connect an audio cable. PW350 series COMPONENT IN VIDEOAUDIO YLPBPRR RGB IN (PC)AUDIO IN(RGB/DVI) ANTENNA/CABLEINR\f-232C IN(CONTROL \b \fERVICE) REMOTECONTROL IN OPTICALDIGITALAUDIO OUTAV IN 1 1 /DVI IN VIDEOAUDIOL/MONOOORRR2 1 2 RGB IN (PC )AUDIO IN(RGB/DVI) RGB OUT (PC)AUDIO OU T LV3500 series IN 3 USB IN OPTICAL DIGITALAUDI O OUTPTICAL DIGITTICAL DIGITANTENNA/CABLE INANTENNAANTENNA H/PANTENNA /CABLE INRS-232C IN(C ONT ROL \f SER VICE) RGB IN(PC ) (RGB/\bVI)AU\bIO INOPTICAL\bIGITALAU\bI O O UT 12 VI\bEO AU\bIO COMPONENT INYPBPR RL VIDEO AUDIORR AV IN 1 / DVI IN21 L/MONOAV IN 2VIDEO / AUDIO RGB OUT (\fC)AUDIO OU T IN 3 U\bB IN O\fTICAL DIGITAL AUDIO OUTANTENNA/ CABLE IN AV IN 2AUDIO / VIDE O H/\fANTENNA INCABLEINR\b-232C IN(CONTROL & \bERVICE) O\fTICAL D IGIT AL A UDIO OU T RGB IN (\fC) (RGB/DVI ) A UDIO IN 1 2 VIDEO AUDIO COMPONENT INY\fB\fR R L VIDEO AUDIOL(MONO) R AV IN 1 / DVI IN2 1 RGB IN (\fC) (RGB/DVI ) A UDIO IN NOTE yyTo get the best picture quality, adjust the PC graphics card to LCDResolution 22LV2500, 32LV255C, LV3500, LV3520, LV355B, LV355C, LV5300, LW5000, LW5300, LW505C, LK430, LK450, LK451C, LK453C, LK520 series 1920x1080 Other models1360x768 PlasmaResolution PZ200 series1920x1080 Other models1024x768 yyDepending on the graphics card, DOS mode may not work if a HDMI to DVI Cable is in use. yyIn PC mode, there may be noise associated with the resolution, vertical pattern, contrast or brightness. yyIf noise is present, change the PC output to another resolution, change the refresh rate to another rate or adjust the brightness and contrast on the PICTURE menu until the picture is clear. yyAvoid keeping a fixed image on the screen for a long period of time. The fixed image may become permanently imprinted on the screen. yyThe synchronization input form for Horizontal and Vertical frequencies is separate. yyDepending on the graphics card, some resolution settings may not allow the image to be positioned on the screen properly. yyWhen selecting HDMI-PC, set the “Input Label - PC” in the INPUT menu.
85 ENGENGLISH MAKING CONNECTIONS Connecting to a USB (Not support for PZ200 series) Connect a USB storage device such as a USB flash memory, external hard drive or a USB memory card reader to the TV and access the My media menu to use various multimedia files. See "Connecting USB storage devices" on p.55 and "Browsing files" on p. 56. or AV IN 2 L/MONO R AUDIOA VIDE O USB IN IN 3 USB IN Connecting to a Headphone (LCD) Listen to the sound through a headphone. IN 3 USB IN H/P ANTENNA /CABLE INRS-232C IN(C\fNT ROL & SER VICE) RGB IN(PC) (RGB/DVI)A\fDIO INOPTIC ALDIGIT ALA\fDIO O\f T 12 VIDEO A\fDIO COMPONENT INY PBPR R L VIDEO AUDIO L(MONO) RR AV IN 1 / DVI IN\f1 L(MONO)L/MONOL(MONO)L(MONO) AV IN \fVIDEO / AUDIO H/P NOTE yyAUDIO menu options are disabled when connecting a headphone. yyWhen changing AV MODE with a headphone connected, the change is applied to video but not to audio. yyOptical Digital Audio Out is not available when connecting a headphone. yyHeadphone impedance: 16 Ω yyMax audio output: 10 mW to 15 mW yyHeadphone jack size: 0.35 cm (0.13 inches) Connecting to an Audio System Use an optional external audio system instead of the built-in speaker. NOTE yyIf you use an optional external audio device instead of the built-in speaker, set the TV speaker feature to off (See p.73). Digital optical audio connection Transmits the digital audio signal from the TV to an external device. Connect the external device and the TV with the optical audio cable as shown in the following illustration. PW350 series COMPONENT IN VIDEOAUDIO YLPBPRR RGB IN (PC)AUDIO IN(RGB/DVI) ANTENNA/CABLEINR\f-232C IN(CONTROL \b \fERVIC E) REMOTECONTROL IN OPTICALDIGITALAUDIO OUTAV IN 1 1 /DVI IN VIDEOAUDIOL/MONOOORRR2 1 2 OPTICAL DIGITA LAUDIO OUT OPTICAL AUDIO IN LV3500 series IN 3 USB IN H/P ANTENNA /CABLE INRS-232C IN( C\fNTR\f L & SER VICE) \fPTIC ALDIGIT ALAUDIO OUT RGB IN(PC) (RGB/DV I)AUDIO IN 1\f VIDEO AUDIO COMPONENT INYPBPR RL VIDEO AUDIORR AV IN 1 / DVI IN21 L/MONOAV IN 2VIDEO / AUDIO OPTICAL AUDIO IN OPTICAL D IGIT AL A UDIO OU T
86 ENGENGLISH MAKING CONNECTIONS SIMPLINK Connection Use the TV remote control to play and control the AV device connected with the HDMI cable through HDMI-CEC. Your TV only works with the devices that support HDMI-CEC. But only devices with the logo are fully supported. Connect one end of the HDMI cable to the HDMI/ DVI IN or HDMI IN terminal on the rear of the TV and the other end to the SIMPLINK device. NOTE yyIf the connected device does not support HDMI-CEC, the SIMPLINK feature is unavailable. yyTo operate SIMPLINK, you should use an High Speed HDMI cable with the CEC (Consumer Electronics Control) function. yySIMPLINK may not work properly if you a third-party device that has an HDMI-CEC function. Activating and Using the SIMPLINK menus 1 Press SIMPLINK to access the SIMPLINK menus. 2 Press the Navigation buttons to select to On. 3 Press the Navigation buttons to scroll to one of the devices and press ENTER. ꔉ Enter ꕉ Exit Watch TV DISC VCR HDD Recorder Speaker 1 2 3 4 5 ◀ On ▶ No.Description 1Displays the previously viewed TV channel. 2Plays discs. When multiple discs are available, the title of the disc appears at the bottom of the screen. 3Controls the connected VCR. 4HDD recordings playback: Controls the recording stored in HDD. 5Audio out to home theater speaker or Audio out to TV: Changes the audio output between Home theater speaker and TV speaker. - A check mark appears in front of the selected device. - Available devices display in a bright color. - Unavailable devices display in grey. 4 Control the selected AV device. - Direct Play: After connecting AV devices to the TV, you can directly control the devices and play media without additional settings. - Select AV device: Enables you to select one of the AV devices connected to the TV. - Disc playback: Control connected AV devices by pressing the Navigation buttons, ENTER, �, �, �, � and �. - Power off all devices: When you power off the TV, all connected devices are turned off. - Switch audio-out: Offers an easy way to switch audio-out. - Sync Power on: When the equipment with SIMPLINK function connected HDMI terminal starts to play, The TV will automatically turn on. NOTE yyIf you change the input source by pressing INPUT, the progressing function of the SIMPLINK device will stop. yyIf you select a device that has the home theater feature, the sound output automatically switches to the home theater speaker and the TV speaker turns off. yyIf a connected SIMPLINK home theater system does not play the audio from the TV, connect the DIGITAL AUDIO OUT terminal on the rear of the TV to the DIGITAL AUDIO IN terminal on the back of the SIMPLINK device with an optical cable.
87 ENGENGLISH MAINTENANCE MAINTENANCE Update and clean your TV regularly to keep the best performance and to extend the product lifespan. Cleaning Your TV CAUTION yyMake sure to turn the power off and disconnect the power cord and all other cables first. yyWhen the TV is left unattended and unused for a long time, disconnect the power cord from the wall outlet to prevent possible damage from lightning or power surges. Screen and frame To remove dust or light dirt, wipe the surface with a dry, clean, and soft cloth. To remove major dirt, wipe the surface with a soft cloth dampened in clean water or a diluted mild detergent. Then wipe immediately with a dry cloth. CAUTION yyDo not push, rub, or hit the surface with your fingernail or a sharp object, as this may result in scratches on the screen and image distortions. yyDo not use any chemicals, such as waxes, benzene, alcohol, thinners, insecticides, air fresheners, lubricants, as these may damage the screen’s finish and cause discoloration. Cabinet and stand To remove dust or light dirt, wipe the cabinet with a dry, clean, and soft cloth. To remove major dirt, wipe the cabinet with a soft cloth dampened in a clean water or water containing a small amount of mild detergent. Then wipe immediately with a dry cloth. CAUTION yyDo not spray liquid onto the surface. If water enters the TV, it may result in fire, electric shock, or malfunction. yyDo not use any chemicals as this may deteriorate the surface. Power cord Remove the accumulated dust or dirt on the power cord regularly. Preventing “Image burn” or “Burn-in” on your TV screen yyIf a fixed image displays on the TV screen for a long period of time, it will be imprinted and become a permanent disfigurement on the screen. This is “image burn” or “burn-in” and not covered by the warranty. yyIf the aspect ratio of the TV is set to 4:3 for a long period of time, image burn may occur on the letterboxed area of the screen. yyAvoid displaying a fixed image on the TV screen for a long period of time (2 or more hours for LCD, 1 or more hours for the Plasma TV) to prevent image burn.
88 ENGENGLISH TROUBLESHOOTING TROUBLESHOOTING General ProblemResolution Cannot control the TV with the remote control.yyCheck the remote control sensor on the product and try again.yyCheck if there is any obstacle between the product and the remote control.yyCheck if the batteries are still working and properly installed ( to , to ).yyCheck if the appropriate input mode such as TV or VCR is set for using the remote control. No image display and no sound is produced.yyCheck if the product is turned on.yyCheck if the power cord is connected to a wall outlet.yyCheck if there is a problem in the wall outlet by connecting other products. Image appears slowly when the TV turns on.yyThe image is muted during the product startup process. This is normal. If the image does not appear in a few minutes, unplug the TV for 30 seconds and try again. If the image still does not appear, contact the authorized service center in your local area. Cannot connect external devices.yyRefer to the "Connection Overview" and connect an external device. The TV turns off suddenly.yyCheck the power control settings. The power supply may be interrupted.yyCheck if the Auto sleep feature is activated in the Time settings. Refer to the "Sleep Timer".yyIf there is no signal while the TV is on, the TV will turn off automatically after 15 minutes of inactivity. (Depending on model) Audio ProblemResolution No sound is produced while images are displaying.yyPress VOL + or - button.yyCheck if the sound is muted by pressing MUTE.yyScroll to other channels. There may a problem with the broadcast.yyCheck if the TV Speaker feature is activated in the menu option. No output from one of the speakersyyAdjust Balance in the menu option. Unusual sound from inside the TV is produced.yyA change in ambient humidity or temperature may result in an unusual noise when the product turns on or off. There is no problem with your product.
8\b ENGENGLISH TROUBLESHOOTING Video ProblemResolution An image displays in black and white or the color quality is poor.yyAdjust the color setting in the menu option.yyKeep a sufficient distance between this product and other electronic products.yyScroll to other channels. There may a problem with the broadcast. Horizontal or vertical bars appears or images bluryyCheck if there are local interferences such as an electrical appliance or power tool. Lines or streaks appear on imagesyyCheck the antenna or aim the antenna to the proper direction. Afterimages (ghosts) appear when the product turns offyyPixels may have been damaged from a fixed image displayed for a long time (image burn). Use a screen saver to prevent the pixel damage on the screen. The power is on but the screen appears extremely dark.yyAdjust the brightness and contrast in the menu option. “No Signal” appears on the screen.yyCheck if the signal cable is connected between the TV and products properly.yyCheck the selected input source by pressing INPUT. Black spots appear on the screen.yySeveral pixels in red, green, white, or black may appear on the screen that can attribute to the characteristics of the panel. yyThis is normal. The display offset is wrong.yyAdjust the position setting in the Picture menu.yyCheck if the video card resolution and frequency are supported by the product. If the frequency is out of range, set to the recommended resolution using the display settings on the external device. Thin lines appear in the background of the screen.yyCheck the video cable connections. Horizontal noises appear or characters blur.yyAdjust the Phase setting in the menu option. Refer to the “SCREEN (RGB-PC)”. The reception on some channels is pooryyScroll to other channels. There may a problem with the broadcast.yyThe station signal may be weak. Aim the antenna to the proper direction.yyCheck if there is local interferences such as an electrical appliance or power tool. Movie ProblemResolution The file does not appear on the Movie List.yyCheck whether the extension is supported. Message is displayedsaying “This file is invalid” or the audio is working normally but the video is not working normally. yyCheck whether the file is playing normally on a PC. (Check whether the file is damaged.)yyCheck whether the resolution is supported.yyCheck whether the video/audio codec is supported.yyCheck whether the frame rate is supported. Message is displayed saying “Unsupported Audio” or the video is working normally but the audio is not working normally. yyCheck whether the file is playing normally on a PC. (Check whether the file is damaged.)yyCheck whether the audio codec is supported.yyCheck whether the bit rate is supported.yyCheck whether the sample rate is supported. Subtitle is not working.yyCheck whether the file is playing normally on a PC. (Check whether the file is damaged.)yyCheck whether the video file and subtitle file name are the same.yyCheck whether the video file and subtitle file are located in the same folder.yyCheck whether the subtitle file is supported.yyCheck whether the language is supported. (When you open the subtitle file in Memo Pad, you can check the language of the subtitle file.)
\b0 ENGENGLISH SPECIFICATIONS SPECIFICATIONS MODELS 42PW340(42PW340-UB)50PW340(50PW340-UB) 42PW350(42PW350-UE)50PW350(50PW350-UE) 42PW350U(42PW350U-UC)50PW350U(50PW350U-UC) 42PW350R(42PW350R-MA)50PW350R(50PW350R-MA) Dimensions(W x H x D)With stand991.8 mm x 667.0 mm x 230.5 mm(39.0 inch x 26.2 inch x 9.0 inch)1176.1 mm x 774.7 mm x 289.8 mm(46.3inch x 30.5 inch x 11.4 inch) Without stand991.8 mm x 613.8 mm x 52.5 mm(39.0 inch x 24.1 inch x 2.0 inch)1176.1 mm x 716.5 mm x 52.5 mm(46.3 inch x 28.2 inch x 2.0 inch) WeightWith stand21.5 kg (47.3 lbs)29.6 kg (65.2 lbs) Without stand20.0 kg (44.0 lbs)27.3 kg (60.1 lbs) Current Value / Power consumption2.3 A / 230 W3.0 A / 300 W Power requirementAC100 - 240 V ~ 50/60 Hz Television SystemNTSC-M, ATSC, 64 & 256 QAM Program CoverageVHF 2-13, UHF 14-69, CATV 1-135, DTV 2-69, CADTV 1-135 External Antenna Impedance75 Ω EnvironmentconditionOperating Temperature0 - 40 °C Operating HumidityLess than 80 % Storage Temperature-20 - 60 °C Storage HumidityLess than 85 % MODELS50PZ200(50PZ200-UA)60PZ200(60PZ200-UA) Dimensions(W x H x D)With stand1171.9 mm x 770.9 mm x 289.8 mm(46.1 inch x 30.3 inch x 11.4 inch)1390.8 mm x 905.2 mm x 334.7 mm(54.7 inch x 35.6 inch x 13.1 inch) Without stand1171.9 mm x 712.2 mm x 52.5 mm(46.1 inch x 28.0 inch x 2.0 inch)1390.8 mm x 835.5 mm x 52.5 mm(54.7 inch x 32.8 inch x 2.0 inch) WeightWith stand29.8 kg (65.6 lbs)42.6 kg (93.9 lbs) Without stand27.5 kg (60.6 lbs)38.5 kg (84.8 lbs) Current Value / Power consumption3.5 A / 350 W5.3 A / 530 W Power requirementAC100 - 240 V ~ 50/60 Hz Product specifications may be changed without prior notice due to upgrade of product functions.