LG Hx906tx Owners Manual

							Connecting21
Connecting2
 
y If a connected HDMI device does not accept 
the audio output of the player, the HDMI 
device’s audio sound may be distorted or 
may not output.
 
y When you use HDMI connection, you can 
change the resolution for the HDMI output. 
(Refer to “Resolution Setting” on page 23.)
 
y Select the type of video output from the 
HDMI OUT jack using [HDMI Color Setting] 
option on the [Setup] menu (see page 33).
 
y Changing the resolution when the 
connection has already been established 
may result in malfunctions. To solve the 
problem, turn off the player and then turn it 
on again.
 
y When the HDMI connection with HDCP 
is not verified, TV screen is changed to 
black screen. In this case, check the HDMI 
connection, or disconnect the HDMI cable.
 
y If there are noises or lines on the screen, 
please check the HDMI cable (length is 
generally limited to 4.5 m(15 ft.)). 
,Note
What is SIMPLINK?
Some functions of this unit are controlled by the TV’s remote control when this unit and LG TV’s with SIMPLINK are connected through HDMI connection.
Controllable functions by LG TV’s remote control; Play, Pause, Scan, Skip, Stop, Power Off, etc.
Refer to the TV owner’s manual for the details of SIMPLINK function.
LG TV’s with SIMPLINK function has the logo as shown above.
Depending on the disc type or playing status, 
some SIMPLINK operation may differ from your 
purpose or not work. 
,Note
ARC (Audio Return Channel) 
function
The ARC function enables an HDMI capable TV to send the audio stream to HDMI OUT of this player.
To use this function:  -Your TV must support the HDMI-CEC and ARC function and the HDMI-CEC and ARC must be set to On.  -The setting method of HDMI-CEC and ARC may differ depending on the TV. For details about ARC function, refer to your TV manual.
 -You must use the HDMI cable ( Type A, High Speed HDMI™ cable with Ethernet).
 -You must connect with the HDMI IN that supports the ARC function using the HDMI OUT on this player.
 -You can connect only one Home Theater to TV compatible with ARC.
 
						

							Connecting22
Connecting2
Component Video Connection
Connect the COMPONENT VIDEO OUT jacks on the player to the corresponding input jacks on the TV using component video cable. You can hear the sound the through the system’s speaker.
Component  
video cable
Rear of the unit
TV
When you use COMPONENT VIDEO OUT 
connection, you can change the resolution for 
the output. (Refer to “Resolution setting” on 
page 23.) 
,Note
Video Connection
Connect the VIDEO OUT jack on the player to the video in jack on the TV using a video cable. You can hear the sound through the system’s speakers.
Rear of the unit
TV Video cable
 
						

							Connecting23
Connecting2
Resolution Setting
The player provides several output resolutions for HDMI OUT and COMPONENT VIDEO OUTPUT jacks. You can change the resolution using [Setup] menu.
1. Press HOME (n).
2. Use A/D to select the [Setup] and press ENTER (b). The [Setup] menu appears.
3. Use W/S to select [DISPLAY ] option then press D to move to the second level. 
4. Use W/S to select the [Resolution] option then press ENTER (b) to move to the third level.
5. Use W/S to select the desired resolution then press ENTER (b) to confirm your selection.
 
y If your TV does not accept the resolution 
you have set on the player, you can set 
resolution to 576p as follows:
1. 
Press 
B to open the disc tray.
2  Press 
Z (STOP) for more than 5 seconds.
 
y Since several factors affect the resolution of 
video output, see “Video Output Resolution” 
on page 72. 
,Note
Antenna connection
Connect the supplied antenna for listening to the radio.
Rear of the unit
 
y To prevent noise pickup. keep the AM Loop 
antenna away from the unit and other 
components.
 
y After connecting the FM wire antenna, keep 
it as horizontal as possible. Be sure to fully 
extend the FM wire antenna. 
,Note
 
						

							Connecting24
Connecting2
Connections with 
external device
AUX Connection
You can enjoy the sound from an external component through the speakers of this system.
Connect the analog audio output jacks of your component into the AUX L/R (INPUT ) on this unit. And then select the [AUX] option by pressing RADIO&INPUT and ENTER (b).
You can also use the FUNC. (Function) button on the front panel to select the input mode.
To the audio output jacks of your component  ( TV, VCR, etc.)
Rear of the unit
White
Red
PORT. IN connection
You can enjoy the sound from your portable audio player through the speakers of this system.
Connect the headphones (or line out ) jack of the portable audio player into the PORT. IN socket of this unit. And then select the [PORTABLE] option by pressing RADIO&INPUT and ENTER (b).
You can also use the FUNC. (Function) button on the front panel to select the input mode.
twZG—“ˆ Œ™SGŒ›ŠUUUMP3 player, etc...
 
						

							Connecting25
Connecting2
OPTICAL IN connection
You can enjoy the sound from your component with a digital optical connection through the speakers of this system.
Connect the optical output jack of your component into the OPTICAL IN jack on the unit. And then select the [OPTICAL] option by pressing RADIO&INPUT and ENTER (b). Or press OPTICAL to select directly.
You can also use the FUNC. (Function) button on the front panel to select the input mode.
To the digital 
optical output jack 
of your componentRear of the unit
HDMI IN 1/2 connection
You can enjoy the pictures and sound  from your component through this connection.
Connect the HDMI OUT jack of your component into the HDMI IN 1 or 2 jack on this unit. And then select the [HDMI IN 1/2] option by pressing RADIO&INPUT and ENTER (b). 
You can also use the FUNC. (Function) button on the front panel to select the input mode.
To the HDMI 
OUT jack of your 
component 
(set-top box, digital 
satellite receiver, 
video game 
machine, etc.)Rear of the unit
 
y You cannot change the video resolution in 
the HDMI IN 1/2 mode. Change the video 
resolution of the connected component.
 
y If the video output signal is abnormal when 
your personal computer is connected to 
HDMI IN 1/2 jack, change the resolution 
of your personal computer to 576p, 720p, 
1080i or 1080p.
 
y The video signal from the HDMI input 
cannot be output from the component or 
composite video outputs.
 
y The player sends audio from the HDMI 
inputs to both the HDMI output and to the 
unit’s speakers. 
,Note
 
						

							Connecting26
Connecting2
Connecting to your 
Home Network
This player can be connected to a local area network (LAN) via the LAN port on the rear panel or the internal wireless module.  By connecting the unit to a broadband home network, you have access to services such as software updates, BD-LIVE interactivity and on-line content services.
Wired network connection
Using a wired network provides the best performance, because the attached devices connect directly to the network and are not subject to radio frequency interference.
Please refer to the documentation for your network device for further instructions.
Connect the player’s LAN port to the corresponding port on your Modem or Router using a commercially available LAN or Ethernet cable.
 
y When plugging or unplugging the LAN 
cable, hold the plug portion of the cable. 
When unplugging, do not pull on the LAN 
cable but unplug while pressing down on 
the lock.
 
y Do not connect a modular phone cable to 
the LAN port.
 
y Since there are various connection 
configurations, please follow the 
specifications of your telecommunication 
carrier or internet service provider.
 
y If you want to access content from PCs 
or DLNA servers, this player must be 
connected to the same local area network 
with them via a router. 
,Note
Rear of the unit Router
Broadband  
service
PC and/or DLNA certified server
 
						

							Connecting27
Connecting2
Wired Network Setup
If there is a DHCP server on the local area network (LAN) via wired connection, this player will automatically be allocated an IP address. After making the physical connection, a small number of home networks may require the player’s network setting to be adjusted. Adjust the [NETWORK] setting as follow.
Preparation
Before setting the wired network, you need to connect the broadband internet to your home network.
1. Select [Connection Setting] option in the [Setup] menu then press ENTER (b). 
2. The [Connection Setting] menu appear on the screen. Use W/S to select the [ Wired] and press ENTER (b).
3. Use W/S/A/D to select the IP mode between [Dynamic] and [Static].
Normally, select [Dynamic] to allocate an IP address automatically.
If there is no DHCP server on the network and 
you want to set the IP address manually, select 
[Static] then set [IP Address], [Subnet Mask], 
[Gateway] and [DNS Server] using 
W/S/
A/D  and numerical buttons. If you make a 
mistake while entering a number, press CLEAR 
to clear the highlighted part.
 
,Note
4.  Select [OK] and press ENTER (b) to apply network settings.
5. The player will ask you to test the network connection. Select [OK] and press ENTER (b) to complete the network connection.
6. If you select [ Test] and press ENTER (b) at step 5 above, the network connection status is displayed on the screen. You can also test it on the [Connection Status] in the [Setup] menu.
 
						

							Connecting28
Connecting2
Wireless Network Connection
Another connection option is to use an Access Point or a wireless router. The network configuration and connection method may vary depending on the equipment in use and the network environment.
This player is equipped with an IEEE 802.11g wireless module, which also supports the 802.11b standards. For the best wireless performance, we recommend using a IEEE 802.11g certified Wi-Fi network (access point or wireless router). 
Wireless 
Communication
PC and/or 
DLNA certified server
Access Point or  
Wireless Router
Broadband  
service
Refer to the setup instructions supplied with your access point or wireless router for detailed connection steps and network settings.
For best performance, a direct wired connection from this player to your home network’s router or cable/DSL modem is always the best option.  If you do chose to use the wireless option, note that performance can sometimes be affected by other electronic devices in the home.
Wireless Network Setup
For the wireless network connection, the player needs to be set up for network communication. This adjustment can be done from the [Setup] menu. Adjust the [NETWORK] setting as follow. Setting up the access point or the wireless router is required before connecting the player to the network.
Preparation
Before setting the wireless network, you need to:
 -connect the broadband internet to the wireless home network.
 -set the access point or wireless router.
 -note the SSID and security code of the network.
1.  Select [Connection Setting] option in the [Setup] menu then press ENTER (b). 
 
						

							Connecting29
Connecting2
2. The [Connection Setting] menu appear on the screen. Use W/S to select [ Wireless] and press ENTER (b).
3. Select [Yes] and press ENTER (b) to continue. The new connection settings reset the current network settings.
4. The player scans the all available access points or wireless routers within range and display them as a list. Use W/S to select an access point or wireless router on the list, and then press ENTER (b).
If you have security on your access point or wireless router, verify that the WEP or WPA key that was entered into the player matches the router’s information exactly. You need to input the security code as necessary.
 
y WEP security mode generally have 4 keys 
available on an access point or wireless 
router’s setting. If your access point or 
wireless router use WEP security, enter the 
security code of the key “No.1” to connect 
on your home network.
 
y An Access Point is a device that allows you 
to connect to your home network wirelessly.
 
y If your access point or wireless router 
supports the PIN Code configuration 
method based on WPS( Wi-Fi Protected 
Setup), press yellow (Y ) colored button and 
note the code number on the screen. And 
then, enter the PIN number on a setting 
menu of your access point or wireless router 
to connect. Refer to the documentation for 
your network device. 
,Note
[Manual] – Your access point may not be broadcasting its access point name (SSID). Check your router settings through your computer and either set your router to broadcast SSID, or manually enter the access point name (SSID) in [Manual]. 
[Push Button] – If your access point or wireless router that supports the Push Button Configuration method, select this option and press the Push Button on your access point or wireless router within 120 counts. You do not need to know the access point name (SSID) and security code of your access point or wireless router.
5.  Use W/S/A/D to select the IP mode between [Dynamic] and [Static]. Normally, select [Dynamic] to allocate an IP address automatically.
If there is no DHCP server on the network and 
you want to set the IP address manually, select 
[Static] then set [IP Address], [Subnet Mask], 
[Gateway] and [DNS Server] using 
W/S/
A/D  and numerical buttons. If you make a 
mistake while entering a number, press CLEAR 
to clear the highlighted part. 
,Note
6.  Select [OK] and press ENTER (b) to apply network settings.
7. The player will ask you to test the network connection. Select [OK] and press ENTER (b) to complete the network connection.
8. If you select [ Test] and press ENTER (b) at step 7 above, the network connection status is displayed on the screen. You can also test it on the [Connection Status] in the [Setup] menu.
 
						

							Connecting30
Connecting2
Notes on Network Connection:
 yMany network connection problems during set up can often be fixed by re-setting the router or modem. After connecting the player to the home network, quickly power off and/or disconnect the power cable of the home network router or cable modem. Then power on and/or connect the power cable again.
 yDepending on the internet service provider (ISP), the number of devices that can receive internet service may be limited by the applicable terms of service. For details, contact your ISP.
 yOur company is not responsible for any malfunction of the player and/or the internet connection feature due to communication errors/malfunctions associated with your broadband internet connection, or other connected equipment.
 yThe features of BD-ROM discs made available through the Internet Connection feature are not created or provided by our company, and our company is not responsible for their functionality or continued availability. Some disc related material available by the Internet Connection may not be compatible with this player. If you have questions about such content, please contact the producer of the disc.
 ySome internet contents may require a higher bandwidth connection.
 yEven if the player is properly connected and configured, some internet contents may not operate properly because of internet congestion, the quality or bandwidth of your internet service, or problems at the provider of the content.
 ySome internet connection operations may not be possible due to certain restrictions set by the Internet service provider (ISP) supplying your broadband Internet connection.
 yAny fees charged by an ISP including, without limitation, connection charges are your responsibility.
 yA 10 Base-T or 100 Base-TX LAN port is required for wired connection to this player. If your internet service does not allow for such a connection, you will not be able to connect the player.
 yYou must use a Router to use xDSL service.
 yA DSL modem is required to use DSL service and a cable modem is required to use cable modem service. Depending on the access method of and subscriber agreement with your ISP, you may not be able to use the internet connection feature contained in this player or you may be limited to the number of devices you can connect at the same time. (If your ISP limits subscription to one device, this player may not be allowed to connect when a PC is already connected.)
 yThe use of a “Router” may not be allowed or its usage may be limited depending on the policies and restrictions of your ISP. For details, contact your ISP directly.
 yThe wireless network operate at 2.4GHz radio frequencies that are also used by other household devices such as cordless telephone, Bluetooth® devices, microwave oven, and can be affected by interference from them.
 yTurn off all unused network equipment in your local home network. Some devices may generate network traffic.
 yFor the purpose of the better transmission, placing the player from the access point as close as possible.
 yIn some instances, placing the access point or wireless router at least 0.45 m (1.5 ft.) above the floor may improve the reception.
 yMove closer to the access point if possible or re-orient the player so there is nothing between it and the access point.
 yThe reception quality over wireless depends on many factors such as type of the access point, distance between the player and access point, and the location of the player.
 ySet your access point or wireless router to Infrastructure mode. Ad-hoc mode is not supported.