LG Hx806sv Owners Manual

Getting Started11
Ge\b\bing S\bar\bed1
	
y The	file	name	is	limited	to	180	characters.	
	
y A	
“avi” 	file	which	is	encoded	 “WMV	9	codec”	
is	not	supported.
	
y Depending	on	the	size	and	number	of	the	
files,	it	may	take	several	minutes	to	read	the	
contents	on	the	media.	
	
y \bile	compatibility	may	differ	depending	on	
the	server.	
	
y Because	the	compatibility	on	DLNA	server	
are	tested	on	the	bundle	DLNA	server	(Nero	
MediaHome	4	Essentials)	environment,	file	
requirements	and	playback	functions	may...

Getting Started12
Ge\b\bing S\bar\bed1
About DLNA
This	Player	is	a	DLNA	\fertified	digital	media	player	that	can	display	and	play	movie,	photo	and	music	content	from	your	DLNA-compatible	digital	media	server	(P\f	and	\fonsumer	Electronics).
The	Digital	Living	Network	Alliance	(DLNA)	is	a	cross-industry	organization 	of 	consumer 	electronics,	computing	industry	and	mobile	device	companies.	Digital 	Living 	provides 	consumers 	with 	easy 	sharing	of	digital	media	through	your	home	network.
The	DLNA...

Getting Started13
Ge\b\bing S\bar\bed1
Battery Installation
Remove	the	battery	cover	on	the	rear	of	the	Remote	\fontrol,	and	insert	a	(size	AAA)	battery	with	4	and	5	matched	correctly.
•  •  •  •  •  •  \oa •  •  •  •  •  •
RADIO&INPUT (P):	\fhanges	input	mode.
MARKER: Marks	any	point	during	playback.
1	(POWER):	Switches	the	player	ON	or	O\b\b.
B (OPEN/CLOSE):	Opens	and	closes	the	disc	tray.
SEARCH: Displays	or	exits	the	search	menu.
INFO/DISPLAY (m):		Displays	or	exits	On-Screen	Display.
HOME (n):...

Getting Started14
Ge\b\bing S\bar\bed1
Front panel
a	1/' (POWER)	Button
b	R	(OPEN/\fLOSE)T	(PLAY/PAUSE)	I (STOP)Y/U,(SKIP)FUNC.	(\bunction)\fhanges	the	input	source	or	function.
c	 PORT.INUSB	Port
d Volume	control	
 

Getting Started15
Ge\b\bing S\bar\bed1
Rear panel
a	 Speakers	connectors
b	 \fooling	\ban
c	 Antenna	\fonnector
d	OPTICAL IN
e	AUX \fR/L) IN/VIDEO OUT
f	HDMI OUT ( Type	A,	HDMI™	\fonnector)\fonnect	to	TV	with	HDMI	inputs.
g	 LAN	port
 

2	 \fonnecting
\fonnecting16
Connec\bing2
Speaker installation
St\bnd type
You	can	adjust	angle	of	speaker.
Sep\br\btes st\bnd
1.	 Push	the	stand	as	shown	below.
2.	 Separate	the	stand	from	the	speaker	as	shown	below.
W\bll type \fMounting the spe\bkers to \b w\bll)
1.	 Separate	the	stand	from	the	speaker.
2.	 Attach	the	stand	to	the	speaker	as	shown	below.
3.	 \bix	the	stand	to	the	speaker	by	rotating	the	screw.
4.	 Drive	1	screw	in	the	wall	for	the	speaker	and	then	hook	the	speaker	over	there.
 

\fonnecting17
Connec\bing2
Speaker \fonnection
Attaching the speakers to the player
	-To	connect	the	cable	to	the	unit,	press	each	plastic	finger	pad	to	open	the	connection	terminals	on	the	unit.	Insert	the	wire	and	release	the	finger	pad.
	-\fonnect	the	black	stripe	of	each	wire	to	the	terminals	marked 	- 	(minus) 	and 	the 	other 	end	to	the	terminals	marked	+	(plus).
ColourSpeakerPosi\fion
GreyRearRear	right
BlueRearRear	left
Green\fenter\fentre
OrangeSub	wooferAny	front	position
Red\bront\bront...

\fonnecting1\f
Connec\bing2
\fonnecting to Your \bV
Make	one	of	the	following	connections,	depending	on	the	capabilities	of	your	existing	equipment.
	yHDMI	connection	(page	18)
	yVideo	connection	(page	19)
	
y Depending	on	your	
TV	and	other	
equipment	you	wish	to	connect,	there	are	
various	ways	you	could	connect	the	player.	
Use	only	one	of	the	connections	described	
in	this	manual.
	
y Please	refer	to	the	manuals	of	your	
TV,	
Stereo	System	or	other	devices	as	necessary	
to	make	the	best	connections....

\fonnecting19
Connec\bing2
	
y If
	a 	connected 	HDMI 	device 	does 	not 	accept	
the	audio	output	of	the	player,	the	HDMI	
device’s	audio	sound	may	be	distorted	or	
may	not	output.
	
y When	you	use	HDMI	connection,	you	can	
change	the	resolution	for	the	HDMI	output.	
(Refer	to	
“Resolution	Setting” 	on	page	19.)
	
y Select	the	type	of	video	output	from	the	
HDMI	OUT	jack	using	[HDMI	\folor	Setting]	
option	on	the	[Setup]	menu	(see	page	27).
	
y \fhanging	the	resolution	when	the	
connection	has	already...

\fonnecting20
Connec\bing2
4. Use	\f/S	to	select	the	[Resolution]	option	then	press	ENTER	(\b)	to	move	to	the	third	level.
5.	 Use	\f/S	to	select	the	desired	resolution	then	press	ENTER	(\b)	to	confirm	your	selection.
	
y If	your	
TV	does	not	accept	the	resolution	
you	have	set	on	the	player,	you	can	set	
resolution	to	576p	as	follows:
1.	 Press	 B	to	open	the	disc	tray.
2.	 Press	 Z	(STOP)	for	more	than	5	seconds.
	
y When	you	set	the	resolution	to	576i	with	
HDMI	connection,	actual	resolution	is...