LG Hx806sg Owners Manual

Getting Started11
G\btting Start\bd1
	yThe
	 file 	 name 	 is 	 limited 	 to 	 180 	 characters. 	
	
y A

	
“
 avi”
	
 file 	 which 	 is 	 encoded 	
“
 WMV 	 9 	 codec”
	is

	 not 	 supported.
	yD

epending 	 on 	 the 	 size 	 and 	 number 	 of 	 the 	
files

, 	 it 	 may 	 take 	 several 	 minutes 	 to 	 read 	 the 	
cont

ents 	 on 	 the 	 media. 	
	
y \b

ile 	 compatibility 	 may 	 differ 	 depending 	 on 	
the

	 server. 	
	
y B

ecause 	 the 	 compatibility 	 on 	 DLNA 	 server 	
ar

e 	 tested...

Getting Started
12
G\btting Start\bd1
About DLNA
This	Player	is	a	DLNA	\fertified	digital	media	player	that	can	display	and	play	movie,	photo	and	music	content	from	your	DLNA-compatible	digital	media	server	(P\f	and	\fonsumer	Electronics).
The	Digital	Living	Network	Alliance	(DLNA)	is	a	cross-industry	o rganization	o f	c onsumer	e lectronics, 	computing	industry	and	mobile	device	companies.	Digital	Living	provides	c onsumers	w ith	e asy	s haring 	of	digital	media	through	your	home	network.
The	DLNA...

Getting Started13
G\btting Start\bd1
Battery Installation
Remove	the	battery	cover	on	the	rear	of	the	Remote	\fontrol,	and	insert	a	(size	AAA)	battery	with	4	and	5	matched	correctly.
•  •  •  •  •  •  \o
a •  •  •  •  •  •
RADIO&INPUT ( P):	\fhanges	input	mode.
MARKER: Marks	any	point	during	playback.
1
	(POWER):	Switches	the	player	ON	or	O\b\b.
B (OPEN/CLOSE):	Opens	and	closes	the	disc	tray.
SEARCH: Displays	or	exits	the	search	menu.
INFO/DISPLAY (
m):		Displays	or	exits	On-Screen	Display.
HOME (
n):...

Getting Started
1\f
G\btting Start\bd1
Front panel
a	
1/ ' (POWER)	Button
b
	
R	(OPEN/\fLOSE)T	(PLAY/PAUSE)	I  (STOP)Y/U,(SKIP)
FUNC.	(\bunction)\fhanges	the	input	source	or	function.
c 	 PORT.INUSB	Port
d Volume	control	
Rear panel
a	 Speakers	connectors
b	 \fooling	\ban
c	 Antenna	\fonnector
d	
OPTICAL IN e
	
AUX \fR/L) IN/VIDEO OUT
f 	
HDMI OUT 
( Type	A,	HDMI™	\fonnector)\fonnect	to	T V 	 with 	 HDMI 	 inputs.
g	 LAN	port
 

2	 \fonnecting
\fonnecting15
Conn\bcting2
Speaker \fonnection
Attaching the speakers to the player
\fonnect	the	wires	hooked	up	to	the	speaker	to	the	unit.
	-To	connect	the	cable	to	the	unit,	press	each	plastic	finger	pad	to	open	the	connection	terminals	on	the	unit.	Insert	the	wire	and	release	the	finger	pad.
	-\fonnect	the	black	stripe	of	each	wire	to	the	terminals	marked	-	( minus)	a nd	t he	o ther	e nd 	to	the	terminals	marked	+	(plus).
ColourSpeakerPosi\fion
Grey Rear
Rear	right
BlueRearRear	left...

\fonnecting
16
Conn\bcting2
\fonnecting to Your \bV
Make	one	of	the	following	connections,	depending	on	the	capabilities	of	your	existing	equipment.
	yHDMI	connection	(page	16)
	yVideo	connection	(page	17)
	y Depending
	 on 	 your 	T V 	 and 	 other 	equipment
	 you 	 wish 	 to 	 connect, 	 there 	 are 	
var

ious 	 ways 	 you 	 could 	 connect 	 the 	 player. 	
Use

	 only 	 one 	 of 	 the 	 connections 	 described 	
in

	 this 	 manual.
	yP

lease 	 refer 	 to 	 the 	 manuals 	 of 	 your 	
T
 V, 	
St...

\fonnecting17
Conn\bcting2
	yIf	a	connected	H
DMI	d evice	d oes	n ot	a ccept 	the
	 audio 	 output 	 of 	 the 	 player, 	 the 	 HDMI 	
de

vice’s 	 audio 	 sound 	 may 	 be 	 distorted 	 or 	
ma

y 	 not 	 output.
	yWhen

	 you 	 use 	 HDMI 	 connection, 	 you 	 can 	
change

	 the 	 resolution 	 for 	 the 	 HDMI 	 output. 	
(R

efer 	 to 	
“R
 esolution 	 Setting”
	
 on 	 page 	 17.)
	yS

elect 	 the 	 type 	 of 	 video 	 output 	 from 	 the 	
HDMI

	 OUT 	 jack 	 using 	 [HDMI 	 \folor 	 Setting]...

\fonnecting
18
Conn\bcting2
4. Use	\f/S	to	select	the	[Resolution]	option	then	press	ENTER	 (\b)	to	move	to	the	third	level.
5.	 Use	\f/S	to	select	the	desired	resolution	then	press	ENTER	(\b)	to	confirm	your	selection.
	yIf
	 your 	TV 	 does 	 not 	 accept 	 the 	 resolution 	y
ou 	 have 	 set 	 on 	 the 	 player, 	 you 	 can 	 set 	
r

esolution 	 to 	 576p 	 as 	 follows:
1.	 Press
	
B	
 to 	 open 	 the 	 disc 	 tray.
2.	 Press
	
Z	
 (STOP) 	 for 	 more 	 than 	 5 	 seconds.
	yWhen

	 you 	 set 	 the...

\fonnecting19
Conn\bcting2
\fonnections with external 
device 
AUX \fonnection
You	can	enjoy	the	sound	of	your	component	with	the	analogue	audio	output	jacks	from	the	speakers	of	the	system.
\fonnect	the	analogue	audio	output	jacks	of	your	component	into	the	AUX	R/L	(INPUT )	on	this	unit.	And	then	select	the	[AUX]	option	by	pressing	RADIO&INPUT	(P)	and	ENTER	(\b).
You	can	also	use	\bUN\f.	button	on	the	front	panel	to	select	the	input	mode.
Red	White	
Rear	of	the	unit
T o 	 the 	 audio 	 output 	 jacks...

\fonnecting
20
Conn\bcting2
\fonnecting to your 
Home Network
This	player	can	be	connected	to	a	local	area	network	(LAN)	via	the	LAN	port	on	the	rear	panel.		By	connecting	the	unit	to	a	broadband	home	network,	you	have	access	to	services	such	as	software	updates,	BD-Live	interactivity	and	streaming	services.
Wired network connection
Using	a	wired	network	provides	the	best	performance,	because	the	attached	devices	connect	directly	to	the	network	and	are	not	subject	to	radio	frequency	interference.
Please...