LG Hw300g Projector Owners Manual

							OWNER’S MANUAL
DLP PROJECTOR
HW300Y
HW300G
HW301Y
HW301G
Please read this manual carefully before operating
your set and retain it for future reference.
www.lg.com 
						

							2SAFETY INSTRUCTIONS
SAFETY INSTRUCTIONS
Please take note of the safety instructions to prevent any potential accident 
or misuse of the projector.
Read these instructions.
Keep these instructions.
Heed all warnings.
Follow all instructions.
Indoor Installation
WARNING
 yDo not place the Projector in direct sunlight or near heat sources such as radiators, fires, stove etc.- This may cause a fire hazard.
 yDo not place flammable materials in, on or near the projector. - This may cause a fire hazard.
 yDo not hang on the installed projector. -  It may cause the projector to fall, causing injury or death.
 yDo not block the vents of the projector or restrict air-flow in any way. -  This would cause the internal temperature to increase and could cause a fire hazard or damage to the unit.
 yDo not place the projector close to sources of steam or oil such as a humidifier. -  This may create a fire hazard or an electric shock hazard.
 yDo not place the projector where it might be exposed to excessive dust. -  This may cause a fire hazard or damage to the unit.
 yDo not use the projector in a damp place such as a bathroom where it is likely to get wet. -  This may cause a fire or an electric shock hazard.
The lightning flash with 
arrowhead symbol, within 
an equilateral triangle, 
is intended to alert the user to 
the presence of uninsulated 
“dangerous voltage” within the 
product’s enclosure that may 
be of sufficient magnitude to 
constitute a risk of electric shock 
to persons.
The exclamation point 
within an equilateral 
triangle is intended to 
alert the user to the presence 
of important operating and 
maintenance (servicing) 
instructions in the literature 
accompanying the appliance.
WARNING/CAUTION
-  TO REDUCE THE RISK OF FIRE 
AND ELECTRIC SHOCK, DO NOT 
EXPOSE THIS PRODUCT TO 
RAIN OR MOISTURE.  
						

							3SAFETY INSTRUCTIONS
 yDo not place the projector directly on a carpet, rug or place where ventilation 
is restricted. -  This would cause its internal temperature to increase and might create a fire hazard or damage the unit.
 yEnsure good ventilation around the projector. The distance between the projector and the wall should be more than 30 cm. -  An excessive increase in its internal temperature may cause a fire hazard or damage to the unit.
NOTES
 yWhen installing the projector on a table, be careful not to place it near the edge.  -  The projector could fall causing injury and damage to the projector. Only use a suitable stand.
 yDisconnect from the power supply and remove all connections before moving, or cleaning.
 yOnly use the projector on a level and stable surface.  
-  It may fall and cause injury and/or damage to the unit.
 yDo not drop the projector when connecting to a external devices. -  This may cause injury and/or damage to the unit.
Power
WARNING
 yThis Projector has a three-prong grounded AC plug.It must be connected to a three-prong grounded AC outlet.                                             If grounding methods are not possible, have a qualified electrician install a separate circuit breaker.                     Do not try to ground the unit by connecting it to telephone wires, lightening rods, or gas pipes.
 yThe power cord should be inserted fully into the power outlet to avoid a fire hazard. -  This may cause a fire hazard or damage the unit.
 yDo not place heavy objects on the power cord.  -  This may cause a fire or an electric shock hazard.
 yNever touch the power plug with a wet hand. -  This may cause an electric shock hazard.
 yDo not plug-in too many items into one power outlet. -  It may result in overheating of the outlet and create a fire hazard.
 yPrevent dust from collecting on the power plug pins or outlet. -  This may cause a fire hazard.  
						

							4SAFETY INSTRUCTIONS
NOTES
 yHold the plug firmly when unplugging. If you pull the cord, it may be damaged. -  This may cause a fire hazard.
 yDo not use if the power cord or the plug is damaged or any part of the power outlet is loose. -  This may cause a fire or an electric shock hazard or damage to the unit.
 yEnsure the power cord does not come into contact with sharp or hot objects. -  This may cause a fire or an electric shock hazard or damage to the unit.
 yPlace the projector where people will not trip or tread on the power cord. -  This may cause a fire or an electric shock hazard or damage to the unit.
 yDo not turn the projector On/Off by plugging-in or unplugging the power plug to the wall outlet. (Allow the unit to cool before removing power.) -  It may cause mechanical failure or could cause an electric shock.
Using
WARNING
 yDo not place anything containing liquid on top of the projector such as flowerpot, cup, cosmetics or candle. -  This may cause a fire hazard or  damage to the unit.
 yIn case of impact shock or damage to the projector switch it off and unplug it from the power outlet and contact an authorized service center. -  This may cause a fire or an electric shock hazard or damage to the unit!
 yDo not allow any objects to fall into the projector. -  This may cause an electric shock hazard or damage to the unit!
 yIf water is spilt into the projector unplug it from the power supply immediately and consult your Service Agent.  -  This may cause an electric shock hazard or damage to the unit!
 yDispose of used batteries carefully and safely. -  In the case of a battery being swallowed by a child please consult a doctor immediately.
 yDo not remove any covers. High risk of Electric Shock.
 yDon’t look directly into the lens when the projector is in use. Eye damage may occur.
 yDo not touch metal parts during or soon after operation since the vents will remain very hot.
 yIf the projector is in a room that experiences a gas leak, do not touch the projector. -  It can cause a fire or a burn by a spark.
 yAlways open the lens door or remove the lens cap when the projector is on.
 yNever touch this apparatus or power cord during a thunder or lightning 
storm. -  This may cause an electric shock hazard.  
						

							5SAFETY INSTRUCTIONS
 yCAUTION concerning the Power CordIt is recommend that most appliances 
be placed on a dedicated circuit; that is, a single outlet circuit which powers only that appliance and has no additional outlets or branch circuits.Check the specification page of this owner’s manual to be certain. Do not overload wall outlets. Overloaded wall outlets, loose or damaged wall outlets, extension cords, frayed power cords, or damaged or cracked wire insulation are dangerous.Any of these conditions could result in electric shock or fire. Periodically examine the cord of your appliance, and if its appearance indicates damage or deterioration, unplug it, discontinue use of the appliance, and have the cord replaced with an exact replacement part by authorized service personnel. Protect the power cord from physical or mechanical abuse, such as being twisted, kinked, pinched, closed in a door, or walked upon. Pay particular attention to plugs, wall outlets, and the point where the cord exits the appliance.
NOTES
 yDo not place heavy objects on top of projector. -  This may cause mechanical failure or personal injury.
 yTake care not to impact the lens particularly when moving the projector.
 yDo not touch the lens of the projector. It is delicate and easily damaged.
 yDo not use any sharp tools on the projector as this will damage the casing.
 yIn the event that an image does not appear on the screen please switch it off and unplug it from the power outlet and contact your Service Agent. -  This may cause a fire or an electric shock hazard or damage to the unit!
 yDo not drop the projector or allow impact shock. -  This may cause mechanical failure or personal injury.
 yKeep the proper distance from the product. -  Your vision may be impaired if you look at the product too closely.  
						

							6SAFETY INSTRUCTIONS
Cleaning
WARNING
 yDo not use water while cleaning the projector. -  This may cause damage to the projector or an electric shock hazard.
 yIn the unlikely event of smoke or a strange smell from the projector, switch it off, unplug it from the wall outlet and contact your dealer or service center. -  This may cause a fire or an electric shock hazard or damage to the unit!
 yUse an air spray or soft cloth that is moist with a neutral detergent and water for removing dust or stains on the projection lens.
NOTES
 yContact the Service Center once a year to clean the internal parts of the projector. -  Accumulated dust can cause mechanical failure.
 yWhen cleaning the plastic parts such as projector case, unplug the power and wipe it with a soft cloth. Do not use cleanser, spray water or wipe with a wet cloth. Especially, never use cleanser (glass cleaner), automobile or industrial shiner, abrasive or wax, benzene, alcohol etc., which can damage the product. Use an air spray or soft cloth that is moist with a neutral detergent and water for removing dust or stains on the projection lens. -  It can cause fire, electric shock 
or product damage (deformation, corrosion and damage).
Others
WARNING
 yDo not attempt to service the projector yourself. Contact your dealer or service center. -  This may cause damage to the projector and could give an electric Shock as well as invalidating the warranty.
NOTES
 yDo not mix new batteries with old batteries. -  This may cause the batteries to overheat and leak.
 yBe sure to unplug if the projector is not to be used for a long period. -  Accumulated dust may cause a fire hazard or damage to the unit!
 yOnly use the specified type of battery. -  This could cause damage to the remote control.  
						

							7TABLE OF CONTENTS
ENTERTAINMENT 23
Network Connection  23
 -Connecting to a Wireless Network  
 23
 -Connecting to a Wireless Network  
 24
 -Tips for Network Setting 26
 -Network Status 28
NETCAST  28
 -Using NETCAST 28
MY MEDIA  32
 -Connecting USB Storage Devices   
 32
 -Connecting DLNA DMP (Digital 
Living Network Alliance, Digital 
Media Player) 34
 -Connecting DLNA DMR (Digital 
Living Network Alliance, Digital 
Media Render) 38
 -MOVIE LIST 39
 -PHOTO LIST 45
 -MUSIC LIST 48
 -FILE VIEWER 49
PLAY GAME  51
CUSTOMIZING SETTINGS 52
The SETUP Menu  52
PICTURE Settings 53
SCREEN Settings 57
AUDIO Settings 58
TIME Settings 58
OPTION Settings 59
NETWORK Settings 60
SAFETY INSTRUCTIONS 2
ASSEMBLING AND PREPAR-
ING 9
Unpacking  9
Optional Extras 10
Parts and Buttons 11
Installation 12
 -Installation Precautions 12
 -Basic Operation of the Projector 13
 -How to Install the Projector Using 
a Tripod 14
 -Kensington Security System 14
REMOTE CONTROL 15
Remote control    
(FOR HW300Y/HW301Y) 15
Remote control    
(FOR HW300G/HW301G) 17
WATCHING PROJECTOR 19
Watching Projector  19
 -Turning on for the First Time 19
 -Focus and Position of the Screen 
Image 19
 -Operating the Projector 19
Using Additional Options  20
 -Adjusting Aspect Ratio 20
 -Adjusting Keystone 21
 -Using the Input List 21
 -Blank Function 22
Using the Quick Menu  22
TABLE OF CONTENTS  
						

							8TABLE OF CONTENTS
MAKING CONNECTIONS 61
Connecting to a HD receiver, DVD, or 
VCR player  62
 -HDMI Connection 62
 -Component Connection 62
 -Composite Connection 63
Connecting to a PC  63
 -RGB Connection 63
Connecting to a Headphone  64
MAINTENANCE 65
Updating the Projector Firmware  65
Cleaning the Projector 66
 -Cleaning the lens 66
 -Cleaning the Projector Case 66
How to Fix the Lens Cap  67
SPECIFICATIONS 68
 NOTE
 yImage shown may differ from your projector.
 yYour projector’s OSD (On Screen Display) may differ slightly from t\
hat shown 
in this manual.  
						

							9ASSEMBLING AND PREPARING
ASSEMBLING AND PREPARING
Unpacking
Check your product box for the following items. If there are any missing\
 
accessories, contact the local dealer where you purchased your product. \
The illustrations in this manual may differ from the actual product and \
item.
USB
 & (
* )
화면가림
방송안내
정보표시
화면정지
위젯
Key’sÝ
Key’sÜ
음량 채널
1 @4 GHI7 PQRS-2 ABC5 JKL8 TUV0 3 DEF6 MNO9 WXYZ이전채널
MY MEDI
A
선호채널 선택
화면크기
메뉴 간편설정

이전
나가기
자동조 정
확인
Ù
한/영/숫자조용히지움 외부입력
채널목록 쌍자음
페
이
지
ㄱ ㄴㅏㅓ
ㄹ ㅁㅗㅜ
ㅅ ㅇㅣ
획추 가 ㅡ
Remote Control 
and Batteries (AAA)Owner’s manualCD Owner's 
manualPower Cord
Computer Cable
Composite/
Component 
Gender cable
AC-DC AdapterPortable bag
Nero MediaHome4 
Essentials CD
(For HW300Y/
HW301Y)
Wireless LAN 
for Broadband/
DLNA Adaptor
 (AN-WF100)
(For HW300Y/
HW301Y)
Polishing ClothLens Cap and 
Strap
 yNote that clearance is limited between the USB and 
HDMI inputs. Using devices of a non-standard size 
may block other ports.  
						

							10ASSEMBLING AND PREPARING
Optional Extras
Optional extras can be changed or modified for quality improvement witho\
ut any 
notification.
Contact your dealer for buying these items.
1 Use screw size: M4x6-M4x8
Projection ScreenTripodHDMI Cable
Video CableAudio CableComponent Cable
AJ-CB2AJ-CB2+AJ-CS60
Ceiling Mounting Bracket1