LG Ht964tz Owners Manual

							11
Adjusting the lock settingsTo access the lock options, you must enter the 4-digit password. If you have not
yet entered a password you are prompted to do so. Enter a 4-digit password
then press ENTER. Enter it again then press ENTERto verify. If you make a
mistake while entering number, press CLEARthen correct it.
If you forget your password you can reset it. First, remove the disc in the unit.
Press SETUPto display the Setup menu. Input ‘210499’ and press ENTER.
The password has now been cleared. 
Rating –Select a rating level. The lower the level, the stricter the rating. Select
[Unlock] to deactivate the rating.
Password –Sets or changes the password for lock settings. 
[New] : Enter a new 4-digit password using the numerical buttons then press
ENTER. Enter the password again to confirm.
[Change] : Enter the new password twice after entering the current password.
Area Code –Select a code for a geographic area as the playback rating level.
This determines which area’s standards are used to rate DVDs controlled by the
parental lock. See the Area Codes on page 20.Adjusting the others settingsDivX(R) VOD –We provide you with the DivX
®VOD (Video On Demand) 
registration code that allows you to rent and purchase videos using the DivX
®
VOD service. 
For more information, visit www.divx.com/vod.
Press ENTERwhen [DivX(R) VOD] is highlighted and you can view the 
registration code of the unit.
Enjoying a pre-programmed sound fieldThis system has a number of pre-set surround sound fields. You can select a
desired sound mode by using SPECIAL EQ/ NIGHT. You can change the
SPECIAL EQ/ NIGHT using I I 
 i
i 
 
arrow key while theSPECIAL EQ/ NIGHT
information is displayed on.
The displayed items for the Equalizer may be different depending on sound
sources and effects.NATURAL You can enjoy comfortable and natural sound.
Local  Regionally optimized sound effect.(DANGDUT/ ARABIC/ 
Specialization  PERSIAN/ INDIA/ REGUETON/ MERENGUE/ SALSA/ equalizer SAMBA)
AUTO EQ Realizes the sound equalizer that is the most similar to the 
genre of which is included in the MP3 ID3 tag of song files.
POP This program lends an enthusiastic atmosphere to the
CLASSIC sound, giving you the feeling you are at an actual rock
JAZZ pop, jazz or classic concert.
ROCK
MP3 OPT This function is optimized for compressible MP3, WMA file.
It improves the bass sound.
BASS Reinforce the treble, bass and surround sound effect.
CLEAR VOICE This program make Voice sound clear, improving the
quality of voice sound. (We encourage to use this  EQ
when you watch the movie of 5.1 channel.)
GAME EQ You can enjoy more virtual sound while playing videogames.
NIGHT MODE This may be useful when you want  to watch movies at lowvolums late at night.
CINEMA MODE You can enjoy more virtual sound while watching movies.VIRTUAL You can enjoy more virtual surround sound.
PLII MOVIE Dolby Pro Logic II enables you to play stereo source on 
PLII MUSIC5-channel. (We encourage a person to use the PLII MTRX.) PLII MTRX(matrix)
NORMAL(OFF) You can enjoy the sound without equalizer effectON DISPLAY Description
HT964TZ-AMP_BARELL_ENG_0726  3/9/09  4:19 PM  Page 11
 
						

							12Displaying Disc Information - more you can doYou can select an item by pressing 
U
U 
 u
u
and change or select the setting by
pressing 
I I 
 i
i
.
Current title (or track/ file) 
number/ total number of titles (or tracks/ files)
Current chapter number/ total number of chapters
Elapsed playing time
Selected audio language or channel
Selected subtitle
Selected angle/ total number of angles
Selected sound mode
Symbol Used in this ManualAll discs and file listed below  MP3 files 
DVD and finalized DVD±R/RW  WMA files 
DivX files 
Audio CDs 
Playing a Disc or file - more you can doPlaying a DVD that has a menu  Most DVDs now have menus which load first before the film begins to play. You
can navigate these menus using 
U U 
 u
u 
 I
I 
 i
i
to highlight an option. 
Press PLAY(B) to select.
Skipping to the next/ previous chapter/ track/ file  Press SKIP(>) to move to the next chapter/ track/ file.
Press SKIP(.) to return to the beginning of the current chapter/ track/ file.
Press SKIP(.) twice briefly to step back to the previous chapter/ track/ file.Pauseing playback  Press PAUSE/STEP(X) to pause playback. Press PLAY(B) to continue 
playback.Frame-by-Frame playback  Press PAUSE/STEP(X) repeatedly to play title Frame-by-Frame.Playing repeatedly or randomly PressREPEAT/RANDOMrepeatedly, and the current title, chapter or track will
be played back repeatedly or randomly. To return to normal playback, press
REPEAT/RANDOMrepeatedly. 
- Random play mode : only music files.Fast forward or fast reverse  Press SCAN(mor M) to play fast forward or fast reverse during playback.
You can change the playback speed by pressing SCAN(mor M) 
repeatedly. Press PLAY(B) to continue play at normal speed.
ALL
ALLDivX
DVD
ALL
ALL
DVD
ACD
DivX
WMA
DVD
MP3
ALL
Displaying Disc Information1Press DISPLAY :
DISPLAY2Select an item : U U 
 u
u3Adjust the Display menu settings : I I 
 i
i
4To return the exit :
DISPLAY
ON REMOTE
Playing a Disc or file
ON REMOTE
1Insert a disc on unit :Z Z 
 
OPEN/CLOSE2Select a DVD/CD : FUNCTION
3Adjust the menu settings :U U 
 u
u 
 I
I 
 i
ior Select a file from the menu :U U 
 u
u4Start the Disc playing :B B
PLAY
5To stop the Disc playing :x x
STOP
1/64/26D 1  ENG
   3/2.1CH1  KOR1/3NORMAL
HT964TZ-AMP_BARELL_ENG_0726  3/9/09  4:19 PM  Page 12
 
						

							13
Selecting a subtitle language  During playback, press SUBTITLE() repeatedly to select a desired subtitle
language.Slow down the playing speed  While playback is paused, press SCAN(bbor BB) to slow down  forward or
reverse playback. You can change the various playback speed by pressing
SCAN(mor M) repeatedly. Press PLAY(B) and PLAY(B) to continue play
at normal speed. The DivX file cannot be slow down reverse playback.1.5 times faster playback  Press PLAY(B) when a DVD is already playing to watch and listen to a DVD
1.5 times faster than normal playback speed. “Bx1.5” will appear in the screen.
Press PLAY(B) again to return to normal playback speed.
If you insert the microphone during “x1.5”speed playback, it returns to the
normal play mode. This function is not operated when you cannot the
microphone.Viewing the Title menu  Press TITLEto display the discs title menu, if available.Starting play from selected time Searches for the starting point of entered time code. Press DISPLAY then select
clock icon. Enter a time then press ENTER. For example, to find a scene at 1
hour, 10 minutes, and 20 seconds, enter “11020” by using numerical buttons
and press ENTER. if you enter the wrong number, press CLEARto enter again.Last Scene Memory  This unit memorizes the last scene from the last disc that is viewed. The last
scene remains in memory even if you remove the disc from the player or switch
off (Stand-by mode) the unit. If you load a disc that has the scene memorized,
the scene is automatically recalled.Mixed disc or USB Flash Drive – DivX, MP3/ WMA and JPEGWhen playing a disc or USB Flash Drive containing  with DivX, MP3/ WMA and
JPEG files together, you can select menu of files which you would like to play
by pressing MENU. If “This file has non-supperted type” pops up, select and
appropriate file by pressing MENU.
Viewing the DVD MENU  Press MENUto display the disc menu, if available.Changing the character set to display DivX
®subtitle correctly  
If the subtitle does not display properly during playback, press and hold 
SUBTITLEfor about 3 seconds then press 
I
I 
 i
i
or SUBTITLEto select another
language code until the subtitle is displayed properly and then press ENTER.
DivX file requirementDivX disc compatibility with this player is limited as follows :
•Available resolution: within 720x576 (W x H) pixels
•The file name of the DivX subtitle should be entered within 45 characters. 
•If there is impossible code to express in the DivX file, it may be displayed as
 _  mark on the display. 
•Frame rate : less than 30 fps
•If the video and audio structure of recorded files is not interleaved, either
video or audio is outputted. 
•Playable DivX file : .avi, .mpg, .mpeg, .divx
•Playable Subtitle format : SubRip (*.srt/ *.txt), SAMI (*.smi), SubStation Alpha
(*.ssa/ *.txt), MicroDVD (*.sub/ *.txt), SubViewer 2.0 (*.sub/ *.txt)
•Playable Codec format : DIVX3.xx, DIVX4.xx, DIVX5.xx, MP4V3,
3IVX.
•Playable Audio format : AC3, DTS, PCM, MP3, WMA.
•Sampling frequency : within 32 - 48 kHz (MP3), within 32 - 48kHz (WMA)
•Bit rate: within 32 - 320kbps (MP3), 40 - 192kbps (WMA)
•For Discs formatted in Live file system, you can not it  on this player.
•If the name of movie file is different from that of the subtitle file, during 
playback of a DivX file, subtitle may not be display.
•If you play a DivX file differ from DivX spec, it may not operate normally.
DivX
DivX
DVD
DVD
DivX
DVD
DVDDVD
DivX
DVD
DivX
DVD
HT964TZ-AMP_BARELL_ENG_0726  3/9/09  4:19 PM  Page 13
 
						

							14Creating your own program You can play the contents of a disc in the order you want by arranging th\
e order
of the musics on the disc. To add a music(s) on the program list, press 
PROG/MEMO to enter the program edit mode ( mark appears on the menu). 
Select a desired music on the [List] by using the 
U U  
 u
u
then press  ENTERto add
the music to the program list. Select music from the program list then p\
ress
ENTER to start programmed playback. To clear a music from the program list,
select the music you want to clear by using the 
U U  
 u
u
then press  CLEAR in
program edit mode. To clear all music from the program list, select [Clear All]
then press  ENTER in program edit mode. The program is cleared when the disc
is removed or the unit is turned off.
Displaying file information (ID3 TAG ) While playing an MP3/ WMA file containing file information, you can display the 
information by pressing  DISPLAYrepeatedly.MP3/ WMA music file requirementMP3/ WMA disc compatibility with this player is limited as follows :
•Sampling frequency : within 32 - 48 kHz (MP3), within 32 - 48kHz (WMA)
• Bit rate : within 32 - 320kbps (MP3), 40 - 192kbps (WMA)
• Support Version : v2, v7, v8, v9
• Maximum files : Under 999.
• File extensions : “.mp3”/ “.wma”
• CD-ROM file format : ISO9660/ JOLIET
•W e recommend that you use Easy-CD Creator, which creates an ISO 9660
file system.VOCAL FADERY ou can enjoy the function as karaoke, by reducing singer vocal of music \
in the
various source. (MP3/ WMA/ CD) Press the  VOCALFADER, and “F ADE
ON” will appear in display window.
To  cancel it, press  VOCAL FADER again.
- This function is available to use only when a microphone is connected.
- The quality of the  VOCAL FADERmay be different depending on the 
recording conditions of music files. 
- It is not available on the MONO mode.
Vi ewing photo files - more you can doViewing photo files as a slide showUse 
U U 
 u
u  
 I
I  
 i
i
to highlight ( ) icon then press  PLAY(B )to start slide Show.
Y ou can change slide show speed using 
I
I  
 i
i
when ( ) icon is highlighted.
Depending on the size and resolution of JPEG files, it may take longer f\
or slide
show to be set.
Skipping to the next/ previous photoPress  SKIP(. or > ) or 
I I 
 i
i
to view the previous/ next photo.
Rotating a photoUse 
U
U  
 u
u
to rotate the photo in full screen counterclockwise or clockwise while
viewing a photo in full screen.
Pausing a slide showPress  PAUSE/STEP (X ) to pause a slide show. Press  PLAY(B )or
P AUSE/STEP (X ) to continue the slide show.Listening to music during slide showYou can listen to music during slide show, if the disc contain music and photo
files together. Use 
U
U  
 u
u  
 I
I  
 i
i
to highlight ( ) icon then press  PLAY(B )to start
slide show. This function is available only in disc.
Photo file requirementJPEG disc compatibility with this player is limited as follows :
• Max pixel in width : 2760 x 2048 pixel
• Maximum files : Under 999.
• Some discs may not operate due to a different recording format or the 
condition of disc.
• File extensions: “.jpg”
• CD-ROM file format : ISO9660/ JOLIET
MP3
EWMA
MP3
ACD
Viewing photo files
ON REMOTE
1 Insert a disc on unit : Z
Z
 
 
OPEN/CLOSE2 Select a DVD/CD : FUNCTION3Select a photo file : U
U
 
 u
u4D isplay the selected file in full screen : B
B
PLAY
5T o return to the menu : x
x
STOP
HT964TZ-AMP_BARELL_ENG_0726  3/9/09  4:19 PM  Page 14
 
						

							15
Listening to the radio - more you can doLooking for radio stations automaticallyPress and hold TUN.-/ TUN.+for more than a second. The tuner will scan 
automatically and stop when it finds a radio station.Deleting all the saved stationsPress and hold PROG./MEMO. for two seconds. ERASE ALL will flash up on
the DVD receiver display. Press PROG./MEMO. to erase all saved radio 
stations.Improving poor FM receptionPress PLAY (B B
) (MO./ST.)on the remote control. This will change the tuner
from stereo to mono and usually improve the reception.
Listening to the radio1Turn the power on : POWER2Select either FM or AM :  FUNCTION3Select a radio station : TUN.-/+
4To ‘save’ a radio station :Apreset number will show in the display.PROG/MEMO.
5Select the preset number :Up to 50 radio stations can be saved.PRESET U U 
 u
u6To confirm press :PROG/MEMO.
7To select a ‘saved’ station input the preset 
number :PRESET U U 
 u
uBe sure that both FM and AM aerials are connected.
ON REMOTE
Home theater Speaker ez Set-up1Connect
the unit’s OPTICAL IN jack to jack on 
optical out of your TV (or Digital Device etc.)
.:-
2Select the AUX OPT: 
To select the AUX OPT directly 
TVt t
HT SPK
3Listen sound with 5.1(2.1 or 2)ch speaker.:  -
4To escape from AUX OPT: TVt t
HT SPK
Function is retuned to previous one.Listen to sound from TV, DVD and Digital Device with 5.1(2.1 or 2)ch
mode.  Even in power off mode, if you press TVtHT SPK, then power is
on and automatically changed to AUX OPT mode.
ON REMOTE
HT964TZ-AMP_BARELL_ENG_0726  3/9/09  4:19 PM  Page 15
 
						

							16
Compatible USB Devices•MP3 Player : Flash type MP3 player.
•USB Flash Drive : Devices that support USB2.0 or USB1.1. 
•The USB function of this unit does not support all USB devices.USB device requirement•Devices which require additional program installation when you have
connected it to a computer, are not supported.Look out for the follows.•Do not extract the USB device while in operation.
•For a large capacity USB, it may take longer than a few minute to be searched
•To prevent data loss, back up all data.
•If you use a USB extension cable or USB hub, the USB device is not
recognized.
•Using NTFS file system is not supported. (Only FAT(16/32) file system is 
supported.
•This unit is not supported when the total number of files is 1000 or more.
•External HDD, Card readers, Locked devices, or hard type usb devices are
not supported.
•USB port of the unit cannot be connected to PC. The unit can not be used as
a storage device.
Using an USB device1Connect the USB device to the USB port of the unit.  -2Select the USB function   FUNCTION3Select a file you want to play U U 
 u
u4Start your media playing B B
PLAY5To stop, pressx x
STOP
6Before disconnecting the portable USB 
device, change to any other function. FUNCTIONYou can enjoy media files saved on an USB device by connecting the
USB device to the USB port of the unit.
If you want to operate other function, see the CD playback section.
ON REMOTE
HT964TZ-AMP_BARELL_ENG_0726  3/9/09  4:19 PM  Page 16
 
						

							17
Recording to USB - more you can doRecording Music file in disc source to USBOne track recording 
If the USB recording is played during playback of the CD, the one track/ file
would be recording into the USB.
All tracks recording 
If the recording button is pressed at the CD stop, all tracks/ files would be
recording.
- The files in the sub-folders are not recorded during all track recording.
- If you want to all tracks recording during playback, press stop twice. check the
“x x
” on the screen.
Program list recording 
USB records after creating your own program if you want to record the track
you want (AUDIO CD Only).
When you are recording, look out for the following•You can check the recording percentage rate for the USB record on the
screen during the recording.(AUDIO CD or MP3/ WMA CD only)
•During recording MP3/ WMA, there is no sound. 
•When you stop recording during playback, the file that has been recorded at
that time will be stored.(AUDIO CD Only)
•Do not remove the USB device during USB recording. If not, an incomplete
file may be made and not deleted on PC.
•Recording through microphones is not available.
•If USB recording does not work, the message like “NO USB”, “ERROR”,
“USB FULL” or “NO REC” is displayed on the display window.
•Multi card reader device or external HDD can not be used for USB recording.
•Afile is recorded by 128Mbyte (about 2 hours) when you record for a long
term. There are recorded less than 4 files.
•When you stop recording during playback, the file will not be stored.
•In the state CD-G, DTS disc USB record is not operated
•You may not record more than 999 files.
•It’ll be stored as follows. 
Recording to USB
ON REMOTE
1Connect the USB device to the unit  -
2Select a mode in which you want 
to record FUNCTION
(ex. CD/ TUNER....)Play back a sound source firstIf you want to record desired music file in Disc to USB, record after playing back the file.U U 
 u
u 
 
and B B 
  
 
PLAY3Start the recording  z z
REC
4To stop recording, press x x
STOP
The making of unauthorized copies of copy-protected material, including
computer programs, files, broadcasts and sound recordings, may be an
infringement of copyrights and constitute a criminal offense. This 
equipment should not be used for such purposes.
Be responsible 
Respect copyrights
MP3/ WMA
The other sources
(Tuner, AUX,
Portable)
AUDIO CD
HT964TZ-AMP_BARELL_ENG_0726  3/9/09  4:19 PM  Page 17
 
						

							18
Playing the iPod - more you can doPauseing playbackPress PAUSE/STEP (X X
)or PLAY (B B
)to pause playback. Press PAUSE/STEP
(X X
)or PLAY (B B
)to continue playback.Skipping to the next/previous filePress SKIP (> >
)to move to the next file.
Press SKIP (. .
)to return to the beginning of the current file. 
Press SKIP (. .
)twice briefly to step back to the previous file.Fast forward or fast reverseAudio files: During playback, press and hold SCAN (m m
or M M
)and then
release at a point you want.
Video files: During playback, press SCAN (m m
or M M
). Press PLAY (B B
)
continue play at normal speed.Playing repeatedlyPress REPEAT/RANDOMrepeatedly to select an item to be repeated. The
current file will be played back repeatedly. To return to normal playback, press
REPEAT/RANDOMrepeatedly. (
On video files, this function is not available.
)
iPod message  “Please, check your iPod” - If the power of your iPod is insufficient or the
iPod is misconnected or unknown device. Reset the iPod if the iPod is not
operating normally (Refer to http://www.apple.com/support/)
“Connect Video Out(only composite) from the HTS to the TV and switch
TV input accordingly.”, “Please, Control through an iPod’s display.” -
When you connect the unit and TV to COMPONENT VIDEO OUT or HDMI
OUT, connect the unit and TV to VIDEO OUT.Compatible iPod•When the unit is connected with dock connector may result in malfunctions
•Compatibility with your iPod may vary depending on the type of your iPod. 
•Depending on your iPod’s software version, it may not be possible to control
your iPod from the unit. We recommend installing the latest software version.When you use iPod, look out for the following•Interference may happen depending on iPod devices.•The video files are outputted only when you connect the unit to VIDEO OUT.
•Connect the end on the cable with the marked “V“ facing downwards to rear
on the unit.
•Be careful not to put iPod dock strongly into  the unit when connecting or
disconnecting it. But the cable may be damaged.
OSD iPod mode
Playing the iPod1Connect the iPod dock on the rear of the unit.: -2Connect your iPod to the dock.: -3Turn the power on:  POWER4Select the OSD iPod or iPod function:  FUNCTION
5Select the menu:U U 
 u
u
and ENTER
If you want to move backwards in the 
menu, press MENU
6Select a file:U U 
 u
u7Start the file playing:BPLAY or ENTER8To stop the file playing:x x
STOP
9Before disconnecting the iPod, change to 
any other function by pressing: FUNCTION
10 Remove the iPod:-
For detail refer to iPod guide.
iPod mode: You can operate your iPod by using the supplied remote
control and directly control on your iPod.
OSD iPod mode:You can operate your iPod by controlling OSD menu
on the TV screen with supplied remote control. The controls on your iPod
are not operational in the OSD iPod mode.
ON REMOTE
HT964TZ-AMP_BARELL_ENG_0726  3/9/09  4:19 PM  Page 18
 
						

							19
Other operationsFall asleep while listening to your playerPress SLEEPone or more times to select delay time between 10 and 180
minutes, after the player will turn off.
To check the remaining time, press SLEEP. To cancel the sleep function, press
SLEEPrepeatedly until “SLEEP 10” appears, and then press SLEEPonce
again while “SLEEP 10” is displayed.DIMMERPress SLEEPonce. The LED (Light-emitting diode) of front panel is turned off
and the display window will be darken by half. To cancel it, press SLEEP
repeatedly until dim off.Screen SaverThe screen saver appears when you leave the unit in Stop mode for about five
minutes.System Select - OptionalYou must select the appropriate system mode for your TV system. If “NO DISC”
appears in the display window, press and hold PAUSE/STEP (X X
)on the
remote control for more than five seconds to be able to select a system. (PAL/
NTSC)
Listening to music from your
portable player or external device1Connect the portable player 
to the 
PORT.IN(PORTABLE IN)connector of the unit.
Or
Connect the external device to the AUXconnector
of the unit.
> If your TV has only one output for audio(MONO). 
connect it to the left(white) audio jack on the unit. -
2Turn the power on   POWER3Select the PORTABLE or AUX function  FUNCTION
4Turn the portable external device and
start it playing -The unit can be used to play the music from many types of portable player or
external device.
ON REMOTE
PORT. IN (PORTABLE IN)Your unitVCR, TV, ...
HT964TZ-AMP_BARELL_ENG_0726  3/9/09  4:19 PM  Page 19
 
						

							20Language CodesUse this list to input your desired language for the following initial settings: Disc Audio, Disc Subtitle, Disc Menu.Area CodesChoose a area code from this list.Language CodeAfar 6565Afrikaans 6570Albanian 8381Ameharic 6577Arabic 6582Armenian 7289Assamese 6583Aymara 6588Azerbaijani 6590Bashkir 6665Basque 6985Bengali; Bangla  6678Bhutani 6890Bihari 6672Breton 6682Bulgarian 6671Burmese 7789Byelorussian 6669
Chinese 9072
Language CodeCroatian 7282Czech 6783Danish 6865Dutch 7876English 6978Esperanto 6979Estonian 6984Faroese 7079Fiji 7074Finnish 7073French 7082Frisian 7089Galician 7176Georgian 7565German 6869Greek 6976Greenlandic 7576Guarani 7178
Gujarati 7185
Language CodeHausa 7265Hebrew 7387Hindi 7273Hungarian 7285Icelandic 7383Indonesian 7378Interlingua 7365Irish 7165Italian 7384Javanese 7487Kannada 7578Kashmiri 7583Kazakh 7575Kirghiz 7589Korean 7579Kurdish 7585Laothian 7679Latin 7665
Latvian, Lettish  7686
Language CodeLingala 7678Lithuanian 7684Macedonian 7775Malagasy 7771Malay 7783Malayalam 7776Maori 7773Marathi 7782Moldavian 7779Mongolian 7778Nauru 7865Nepali 7869Norwegian 7879Oriya 7982Panjabi 8065Pashto, Pushto  8083Persian 7065Polish 8076
Portuguese 8084
Language CodeQuechua 8185Rhaeto-Romance 8277Rumanian 8279Russian 8285Samoan 8377Sanskrit 8365Scots Gaelic  7168Serbian 8382Serbo-Croatian 8372Shona 8378Sindhi 8368Singhalese 8373Slovak 8375Slovenian 8376Spanish 6983Sudanese 8385Swahili 8387Swedish 8386
Tagalog 8476
Language CodeTajik 8471Tamil 8465Telugu 8469Thai 8472Tonga 8479Turkish 8482Turkmen 8475Twi 8487Ukrainian 8575Urdu 8582Uzbek 8590Vietnamese 8673Volapük 8679Welsh 6789Wolof 8779Xhosa 8872Yiddish 7473Yoruba 8979
Zulu 9085
Area CodeAfghanistan AFArgentina ARAustralia AUAustria ATBelgium BEBhutan BTBolivia BOBrazil BRCambodia KHCanada CAChile CLChina CNColombia CO
Congo CGArea Code
Costa Rica  CRCroatia HRCzech Republic  CZDenmark DKEcuador ECEgypt EGEl Salvador  SVEthiopia ETFiji FJFinland FIFrance FRGermany DEGreat Britain  GB
Greece GRArea Code
Greenland GLHong Kong  HKHungary HUIndia INIndonesia IDIsrael ILItaly ITJamaica JMJapan JPKenya KEKuwait KWLibya LYLuxembourg LU
Malaysia MYArea Code
Maldives MVMexico MXMonaco MCMongolia MNMorocco MANepal NPNetherlands NLNetherlands Antilles  ANNew Zealand  NZNigeria NGNorway NOOman OMPakistan PK
Panama PAArea Code
Paraguay PYPhilippines PHPoland PLPortugal PTRomania RORussian Federation  RUSaudi Arabia  SASenegal SNSingapore SGSlovak Republic  SKSlovenia SISouth Africa  ZASouth Korea  KR
Spain ESArea Code
Sri Lanka  LKSweden SESwitzerland CHTaiwan TWThailand THTurkey TRUganda UGUkraine uawUnited States  USUruguay UYUzbekistan UZVietnam VN
Zimbabwe ZW
HT964TZ-AMP_BARELL_ENG_0726  3/9/09  4:19 PM  Page 20