LG Ht964pz Owners Manual

Model : HT964TZ (HT964TZ-AM, SH94TZ-F/S/C/W)
HT964PZ (HT964PZ-AM, SH94PZ-F/S/C/W)P/NO : MFL60020744
English
As an E
NERGY
STA R
®Partner,
LG has determined that this
product or product models meet
the E
NERGY
STA R
®guidelines for
energy efficiency.
ENERGY
STA R
®is a U.S. registered mark.
Full HD up-scaling (1080p) 
(Go to page 6)HDMI In 
(Go to page 7)
Portable In
(Go to page 18) USB Direct Recording 
(Go to page 17)Home theater Speaker ez Set-up
(Go to page 15)
HT964PZ-AM_BSGPLL_ENG_0744  2/20/09...

2CAUTION : TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE
COVER (OR BACK) NO USER-SERVICEABLE PARTS INSIDE REFER SERVICING
TO QUALIFIED SERVICE PERSONNEL.
This lightning flash with arrowhead symbol within an equilateral triangle is
intended to alert the user to the presence of uninsulated dangerous voltage
within the product’s enclosure that may be of sufficient magnitude to
constitute a risk of electric shock to persons. 
The exclamation point within an equilateral triangle is intended to alert the...

3
Contents
Setting up  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4
Hooking up the unit  . . . . . . . . . . . . . . . . . . . . . . . . . . . .5-7
Main Unit  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7
Remote control  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8
OSD Initial language settings - Optional  . . . . . . . . . . . . . .9
Initial Setting the Area Code - Optional  . . . . . . . . . . . . . . .9
Adjusting the...

4Setting upAttaching the speakers to the DVD receivera a 
 
You will have received six speaker cables.
Each one is colour-coded by a band near each end and connects one of
the six speakers to the DVD receiver.
b b 
 
Connect the wires to the DVD receiver.
Match each wire’s coloured band to the same coloured connection
terminal on the rear of the DVD receiver. To connect the cable to the DVD
receiver, press each plastic finger pad to open the connection terminal.
Insert the wire and release the finger...

5
Hooking up the unitaConnect jacks on the unit and your TV (DVD player or Digital Device etc.) using the cables.
Check the jacks of your TV, and choose the A, Bor Cconnection. Picture quality improves in order from Ato C.
bPlug the power cord into the power source.
Audio In connection
The unit’s Audio jacks are
colour coded (red for right
audio and white for left
audio). If your TV has only
one output for audio (mono),
connect it to the left (white)
audio jack on the unit.
AM/ FM connection
AM - Connect...

6Hooking up the unitResolution SettingYou can change the resolution for component video and HDMI output. 
Press RESOLUTIONrepeatedly to select the desired resolution - 480i (or 576i),
480p (or 576p), 720p, 1080i, 1080p 
The resolution may not be selected depending on the connection or TV.
•Depending on your TV, some of the resolution settings may result in the
picture disappearing or an abnormal picture appearing. In this case, press
RESOLUTIONrepeatedly until the picture re-appears.
You can set 1080p...

Hooking up the unit Main Unit
1Power (1 1
/` `
)
Turns the unit on and off.
2 DVD/CD Disc Drawer
3 Open/Close (Z Z
)
4 Play/Pause(B B
/X X
)
5 Stop (x x
)
6TUNING, Skip / Search (. .>
>
)
7 Function (F)
Selects the function and input source.(DVD/CD, USB, AUX, AUX OPT, PORTABLE, HDMI IN, FM, AM)8 Volume (-/+)
Controls the volume when using any function.
When you press volume (-/+) on the unit, volume is increased or
decreased only one step. 
9MIC 1/MIC 2 
Connect a microphone to MIC 1 or MIC 2 to both...

8Remote controlabcd
FUNCTION : Selects the function and input source.
(DVD/CD, USB, AUX, AUX OPT,  PORTABLE, HDMI IN,
FM, AM)
SLEEP : Sets the System to turn off automatically at a
specified time. (Dimmer : The lighting of the touch buttons
are turned off and the front panel display is dimmed.)
POWER : Switches the unit ON or OFF.
OPEN/CLOSE :Opens and closes the disc Drawer.
TITLE : If the current DVD title has a menu, the title
menu appears on the screen. Otherwise, the disc menu
may not appear....

9
Adjusting the settings - more you can doAdjusting the language settingsMenu Language – Select a language for the Setup menu and on-screen 
display. 
Disc Audio/ Disc Subtitle/ Disc Menu – Select a language for the Disc Audio/
Disc Subtitle/ Disc Menu. 
[Original] : Refers to the original language in which the disc was recorded.
[Others] : To select another language, press number buttons then ENTERto
enter the corresponding 4-digit number according to the language code list in
the reference chapter (see...

10Adjusting the display settingsTV Aspect – Select which screen aspect to use based on the shape of your TV
screen. 
[4:3] : Select when a standard 4:3 TV is connected.
[16:9] : Select when a 16:9 wide TV is connected.
Display Mode – If you selected 4:3, you’ll need to define how you would like
widescreen programs and films to be displayed on your TV screen. 
[Letterbox] : This displays a widescreen picture with black bands at the top
and bottom of the screen.
[Panscan] : This fills the entire 4:3...