LG Ht806tq Owners Manual

							Co\f\fecti\fg21
Conn\bcting2
OPTICAL I\f co\f\fectio\f
Connect	an	optical	output	of	Unit	(or	Digital	Device	etc)	to	the	OPTICA\b	IN	connector.
To \fhe \bigi\fal 
op\fical ou\fpu\f jack \g
of your componen\f
Home theate\b speake\b ez 
setup
\bisten	to	sound	from	TV,	DVD	and	Digital	Device	with	5.1(2.1	or	2)ch	mode.	Even	in	power	off	mode,	if	you	press	OPTICAL,	then	power	is	on	and	automatically	changed	to	AUX	OPT	mode.
1.	 Connect	the	unit’s	OPTICA\b	IN	jack	to	jack	on	optical	out	of	your	TV	(or	Digital	Device	etc.).
2.	 Select	the	AUX	OPT	by	using	the	OPTICAL.To	select	the	AUX	OPT	directly.
3.	 \bisten	sound	with	5.1(2.1	or	2)ch	speaker.
4.	 To	escape 	from 	AUX 	OPT 	by 	using 	the 	OPTICAL.Function	is	retuned	to	previous	one.
A\fte\f\fa Co\f\fectio\f
Connect	the	supplied	FM/AM	antenna	for	listening	to	the	radio.
Connect	the	AM	\boop	antenna	to	the	AM	antenna	connector.
Connect	the	FM	 Wire	antenna	to	the	FM	antenna	connector.
	
y To	prevent	noise	pickup,	keep	the	AM	\boop	
antenna	away	from	the	unit	and	other	
components.
	
y Be	sure	to	fully	extend	the	FM	wire	antenna.	
After	connecting	the	FM	wire	antenna,	keep	
it	as	horizontal	as	possible.,
,Not\b
HT806TQ-A2_DMARLLK_ENG_6869.indd   212010-12-16   �� 6:31:21 
						

							3	 System	Setting
System Setti\fg22
Syst\bm S\btting3
Adjust the setup 
setti\fgs
By	using	the	Setup	menu,	you	can	make	various	adjustments	to	items	such	as	picture	and	sound.
You	can	also	set	a	language	for	the	subtitles	and	the	Setup 	menu, 	among 	other 	things. 	For 	details 	on	each	Setup	menu	item,	see	pages	22	to	26.
OSD I\fitial la\fguage se\itti\fgs 
- Optio\fal
During	the	first	use	of	this	unit,	the	initial	language	setup	menu	appears	on	your	 TV	screen.	You	must	complete	initial	language	selection	before	using	the	unit.	English	will	be	selected	as	the	initial	language.
1.	 Press	1	(POWER)	to	turn	the	unit	on.	 The	language	setup 	menu 	will 	appear 	on 	the 	screen.
2.	 Use	WS\fD	to	select	a	language	then	press	b	ENTER.	The	confirm	menu	will	appear.
3.	 Use	\fD	to	select	the	[Enter]	then	press	b	ENTER	to	finish	the	language	setup.
To display a\fd exit the S\ietup 
me\fu
1.	 Press	n	HOME.Displays	the	[\fome	Menu].
2.	 Select	an	[Setup]	by	using	\fD.
3.	 Press	b	ENTER.Displays	the	[Setup].
4.	 Press	n	HOME	or	x	RETURN	to	exit	in	the	[Setup]	Menu.
Abou\f help menu for Se\fup
MenuBu\f\fons Opera\fion
ws
MoveWSMoving	to	another	menu.
aMove\fMoving	to	previous	level.
d
MoveDMoving	to	next	level	or	selecting	menu.
x
Closex RETURNTo	exit	the	[Setup]	menu	or	[	5.1	Speaker	Setup].
b Selec\fb	ENTERTo	confirm	menu.
HT806TQ-A2_DMARLLK_ENG_6869.indd   222010-12-16   �� 6:31:22 
						

							23
Syst\bm S\btting3
La\fguage
Me\fu La\fguage
Select	a	language	for	the	Setup	menu	and	then	on	screen	display.
Disc Audio / Disc Subtitle / Disc 
Me\fu
Select	the	language	you	prefer	for	the	audio	track	(disc	audio),	subtitles,	and	the	disc	menu.
[Original]
Refers	to	the	original	language	in	which	the	disc	was	recorded.
[O\fher]
To	select	another	language,	press	numeric	buttons	and	then	b	ENTER	to	enter	the	corresponding	4-digit	number	according	to	the	language	code	list	on	the	page	39.	If	you	enter	the	wrong	language	code,	press	CLEAR.
[Off (for Disc Sub\fi\fle)]
Turn	off	Subtitle.
Display
TV Aspect
Select	which	screen	aspect	to	use	based	on	the	shape	of	your	TV	screen.	
[4:3]
Select	when	a	standard	4:3	 TV	is	connected.
[16:9]
Select	when	a	16:9	wide	TV	is	connected.
Display Mode
The	Display	Mode	setting	works	only	when	the	 TV	Aspect	mode	is	set	to	4:3.
[Le\f\ferbox]
Displays	a	wide	picture	with	bands	on	the	upper	and	lower	portions	of	the	screen.
[Panscan]
Automatically	displays	the	wide	picture	on	the	entire	screen	and	cuts	off	the	portions	that	do	not	fit.	(If	the	disc/file	is	not	compatible	with	Pan	Scan,	the	picture	is	displayed	at	\betterbox	ratio.)
Resolutio\f
Sets	the	output	resolution	of	the	Component	and	\fDMI	video	signal.	Refer	to	“Resolution	Setting”	for	details	about	the	resolution	(page	18).
[Au\fo]
If	the	\fDMI	OUT	jack	is	connected	to	TVs	providing	display	information	(EDID),	automatically	selects	the	resolution	best	suited	to	the	connected	TV.	If	the	COMPONENT	VIDEO	OUT	is	only	connected,	this	changes	the	resolution	to 	480i 	(or 	576i) 	as 	default 	resolution.
[1080p]
Outputs	1080	lines	of	progressive	video.
[1080i]
Outputs	1080	lines	of	interlaced	video.
[720p]
Outputs	720	lines	of	progressive	video.
[480p (or 576p)]
Outputs	480	(or	576)	lines	of	progressive	video.
[480i (or 576i)]
Outputs	480	(or	(576)	lines	of	interlaced	video.
System Setti\fg
HT806TQ-A2_DMARLLK_ENG_6869.indd   232010-12-16   �� 6:31:22 
						

							System Setti\fg24
Syst\bm S\btting3
Audio
5.1 Speake\b Setup
Make	the	following	settings	for	the	built-in	5.1	channel	surround	decoder.
1.	 Select	[5.1	Speaker	Setup]	on	the	[Audio]	menu.
2.	 Press	b	ENTER.The	[5.1	SPEAKER]	appears.
3.	 Use	\fD	to	select	the	desired	speaker.
4.	 Adjust	options	using	WS\fD	buttons.
5.	 Returns	to	the	previous	menu	by	pressing	x	RETURN.
[Speaker]
Select	a	speaker	that	you	want	to	adjust.
Certain	speaker	settings	are	prohibited	by	the	
Dolby	Digital	licensing	agreement.,
,Not\b
[Size]
Since	the	speaker	settings	are	fixed,	you	cannot	change	the	settings.
[Volume]
Press	\fD	to	adjust	the	output	level	of	the	selected	speaker.
Front	\b/R	:	0	-	-5	SubWoofer,	Rear	\b/R,	Center	:	5	-	-5
[Dis\fance]
After	you	connected	speakers	to	your	unit,	set	the	Distance	between	the	speakers	and	your	listening	point	if	the	distance	of	Center	or	Rear	speakers	is	bigger	than	the	distance	of	Front	speakers.	 This	allows	the	sound	from	each	speaker	to	reach	the	listener	at	the	same	time.	Press	\fD	to	adjust	the	Distance	of	the	selected	speaker.	This	distance	is	equivalent	to	a	difference	of	the	distance	between	Center	or	Rear	speaker	and	Front	speakers.
[Tes\f]
Select	[Speaker	Test	Start]	by	using	the	WS	and	press	b	ENTER.	Press	b	ENTER	again	to	stop.	Adjust	the	volume	to	match	the	volume	of	test	signals	memorized	in	the	system.
HT806TQ-A2_DMARLLK_ENG_6869.indd   242010-12-16   �� 6:31:22 
						

							System Setti\fg25
Syst\bm S\btting3
DRC (Dy\famic Ra\fge Co\ft\bol) 
Make	the	sound	clear	when	the	volume	is	turned	down	(Dolby	Digital	only).	Set	to	[On]	for	this	effect.
Vocal
Select	[On]	to	mix	karaoke	channels	into	normal	stereo.
This	function	is	effective	for	multi-channel	karaoke	DVDs	only.
HD AV Sy\fc
Sometimes	Digital	TV	encounters	a	delay	between		picture	and	sound.	If	this	happens	you	can	compensate	by	setting	a	delay	on	the	sound	so	that	it	effectively	‘waits’	for	the	picture	to	arrive:	this	is	called	\fD	AV	Sync.	Use	WS	(on	the	remote	control)	to	scroll	up	and	down	through	the	delay	amount,	which	you	can	set	at	anything	between	0	and	300m	sec.
Semi Ka\baoke 
When	a	chapter/	title/	track	is	fully	finished,	this	function	shows	the	score	in	the	screen	with	a	fanfare	sound.
[On]
When	you	finished	singing	a	score	will	appear	on	the	screen.
[Off ]
Fanfare	and	score	do	not	appears	on	the	screen.
	
y 	DVD,	DVD	Karaoke	discs	with	more	than	
2	tracks	are	available	discs	for	the	this	
function.
	
y 	When	you	watch	movies,	
“off	”	the	Semi	
Karaoke	at	the	SETUP	menu	or	enjoy	it	
without	connecting	the	MIC	if	the	fanfare	or	
score	appears	during	changing	a	chapter.
	
y 	This
	function 	operate 	on 	the 	DVD/CD 	mode.
	
y 	The	Semi	Karaoke	function	is	available	only	
when	a	microphone	is	connected.	,
,Not\b
Lock (Pa\be\ftal Co\ft\bol)
I\fitial Setti\fg the A\bea Code:
When	you	use	this	unit	for	the	first	time,	you	have	to	set	the	Area	Code.
1.	 Select	the	[\bock]	menu	and	then	press	D.
2.	 Press	D.To	access 	the	[\bock]	options,	you	must 	input	the	password	you	have	created.	Input	a	password	and	press	b	ENTER.	Enter	it	again	and	press	b	ENTER	to 	verify. 	If 	you 	make 	a 	mistake 	before	pressing	b	ENTER,	press	CLEAR.
3.	 Select	the	first	character	using	WS	buttons.
4.	 Press 	b	ENTER	and 	select 	the 	second 	character	using	WS	buttons.
5.	 Press	b	ENTER	to	confirm	your	Area	code	selection.
Rati\fg
Blocks	playback	of	rated	DVDs	based	on	their	contents.	Not	all	discs	are	rated.
1.	 Select	[Rating]	on	the	[\bock]	menu	then	press	D.
2.	 Input	a	password	and	press	b	ENTER.
3.	 Select	a	rating	from	1	to	8	using	the	WS	buttons.
[Ra\fing 1-8]
Rating	one	(1)	has	the	most	restrictions	and	rating	eight	(8)	is	the	least	restrictive.
[Unlock]
If	you	select	unlock,	parental	control	is	not	active	and	the	disc	plays	in	full.
4.	 Press 	b	ENTER	to 	confirm 	your 	rating 	selection.
HT806TQ-A2_DMARLLK_ENG_6869.indd   252010-12-16   �� 6:31:22 
						

							4	 Operating
System Setti\fg26
Syst\bm S\btting3
Passwo\bd
You	can	enter	or	change	password.
1.	 Select	[Password]	on	the	[\bock]	menu	and	then	press	D.
2.	 Press	b	ENTER.
3.	 Input	a	password	and	press	b	ENTER.
	 To	change	the	password,	press	b	ENTER	when	the	[Change]	option	is	highlighted.	Input	a	password	and	press	b	ENTER.	Enter	it	again	and	press	b	ENTER	to	verify.
4.	 Press	n	HOME	to	exit	the	menu.
If	you	forget	your	password,	you	can	clear	it	
using	the	following	steps:
1.	 Select	the	[Setup]	menu	on	the	[\fome	Menu].
2.	 Input	the	6-digit	number	 “210499”	and	
press	 b	ENTER.	
The	password	is	cleared.,
,Not\b
A\bea Code
Enter	the	code	of	the	area	whose	standards	were	used	to	rate	the	DVD	video	disc,	based	on	the	list	on	page	38.
1.	 Select	[Area	Code]	on	the	[\bock]	menu	then	press	D.
2.	 Input	a	password	and	press	b	ENTER.
3.	 Select	the	first	character	using	WS	buttons.
4.	 Press 	b	ENTER	and 	select 	the 	second 	character	using	WS	buttons.
5.	 Press	b	ENTER	to	confirm	your	Area	code	selection.
Othe\bs
DivX VOD
We	provide	you	with	the	DivX®	 VOD	( Video	On	Demand)	registration	code	that	allows	you	to	rent	and	purchase	videos	using	the	DivX®	 VOD	service.
For	more	information,	visit	www.divx.com/vod.
[Regis\fer]
Displays	the	registration	code	of	your	player.
[Deregis\fer]
Deactivate	your	player	and	display	the	deactivation	code.
All	the	downloaded	videos	from	DivX	 VOD	can	
only	be	played	back	on	this	unit.,
,Not\b
HT806TQ-A2_DMARLLK_ENG_6869.indd   262010-12-16   �� 6:31:22 
						

							4	 Operating
Ope\bati\fg27
Op\brating4
Usi\fg the Home Me\fu
1.	 Press	n	HOME.Displays	the	[\fome	Menu].
2.	 Select	an	option	by	using	\fD.	
3.	 Press	b	ENTER	then	selected	option	menu.
[Music]	–	Displays	[MUSIC]	menu.
[Movie]	–		Start	video	media’s	playback	or	displays	the	[MOVIE]	menu.
[Photo]	–	Displays	[P\fOTO]	menu.
[Setup]	–	Displays	the	[Setup]	menu.
You	can	not	select	the	[Music],	[Movie]	or	
[Photo]	option	when	the	USB	device	is	not	
connected	or	a	disc	is	not	inserted.,
,Not\b
Basic Ope\batio\fs
1.	 Insert	the	disc	by	using	the	B	OPEN/CLOSE	or	Connect	the	USB	device	to	the	USB	port.
2.	 Press	n	HOME.Displays	the	[\fome	Menu].
3.	Select	an	option	by	using	\fD.If	you	select	the	[Movie],	[Photo]	or	[Music]	option	when	you	connect	up	to	two	devices,	it	appears	as	belows.	Select	a	media	then	press	b	ENTER.	
4.	 Press	b	ENTER	then	selected	option	menu.
	
y For	the	most	Audio	CD	and	DVD-ROM	discs,	
playback	starts	automatically.
	
y The	unit	plays	only	music	file	contained	in	
the
	USB 	storage 	device 	or 	disc 	automatically.,
,Not\b
HT806TQ-A2_DMARLLK_ENG_6869.indd   272010-12-16   �� 6:31:22 
						

							Ope\bati\fg28
Op\brating4
ToDo \fhis
Stop	Press	\b STOP.
PlaybackPress d PLAY, MONO/STEREO.
PausePress	M PAUSE/STEP.
Frame-by-Frame	playback
Press	M PAUSE/STEP	repeatedly	to	play	title	Frame-by-Frame.	(DVD,	DivX	only)
Skipping	to	the	next/	previous	chapter/	track/	file
During	playback,	press C/,V SKIP	to	go	to	the	next	chapter/	track/	file	or	to	return	to	the	beginning	of	the	current	chapter/	track/	file.
Press	C,SKIP twice	briefly	to	step	back	to	the	previous	chapter/	track/	file.
\bocating	a	point	quickly 	by	playing	a	file	in	fast	forward	or	fast	reverse
During	playback,	press	c/v SCAN	repeatedly	to	select 	the 	required 	scan 	speed.
To	return	to	normal	speed,	press	d PLAY, MONO/STEREO.
Playing	repeatedly	or	randomly
Press 	h REPEAT repeatedly,	and	the	current	title,	chapter	or	track	will	be	played	back	repeatedly	or	randomly.	
-	DVD	:	Chapter/	 Title/	Off
-	DivX	:	Title/	All/	Off
-		Audio 	CD/ 	MP3/ 	WMA 	:	 Track/	All/	Random/	Off
Slowing	down	the	playing	speed
In	the	pause	mode,	press	S\bOW	(c	or	v)	to	select	the	required	speed.	(DVD,	DivX	only)	 The	DivX	file	cannot	be	slow	down	reverse	playback.
Othe\b Ope\batio\fs
Displayi\fg Disc I\ffo\bmatio\f 
o\f-sc\bee\f
You	can	display	various	information	about	the	disc	loaded	on-screen.
1.	 Press	m	INFO/DISPLAY	to	show	various	playback	information.	The	displayed	items	differ	depending	on	the	disc	type	or	playing	status.
2.	 You	can	select	an	item	by	pressing	WS,and	change	or	select	the	setting	by	pressing	\fD.
Title	–		 Current	title	number/	total	number	of	titles.
Chapter	–		 Current	chapter	number/	total	number	of	chapters.
Time	–	Elapsed	playing	time.
Audio	–		Selected	audio	language	or	channel.
Subtitle	–	Selected	subtitle.
Angle	–		Selected	angle/	total	number	of	angles.
If	any	button	is	not	pressed	for	a	few	seconds,	
the	on-screen	display	disappears.,
,Not\b
HT806TQ-A2_DMARLLK_ENG_6869.indd   282010-12-16   �� 6:31:22 
						

							Ope\bati\fg29
Op\brating4
To display the DVD Me\fu
r
When	you 	play 	a 	DVD 	which 	contains 	several 	menu,	you	can	select	the	menu	you	want	using	the	Menu.
1.	 Press	DISC MENU.The	disc’s	menu	appears.
2.	 Select	the	menu	by	using	WS\fD.
3.	 Press	d	PLAY, MONO/STEREO	to	confirm.
To display the DVD title
r
When	you	play	a	DVD	which	contains	several	title,	you	can	select	the	title	you	want	using	the	Menu.
1.	 Press	TITLE.The	disc’s	title	appears.
2.	 Select	the	menu	by	pressing	WS\fD.
3.	 Press	d	PLAY, MONO/STEREO	to	confirm.
1.5 times speed playback
r
The	1.5	speed	allows	you	to	watch	the	pictures	and	listen	to	the	sound	quicker	than	playing	at	a	normal	speed.
1.	 During	playback,	press	d	PLAY, MONO/STEREO	to	play	at	1.5	times	speed.	 “dX1.5”	appears	on	the	screen.
2.	 Press	d PLAY, MONO/STEREO	again	to	exit.
Sc\bee\f Save\b
The	screen	saver	appears	when	you	leave	the	unit	in	Stop	mode	for	about	five	minutes.
Sta\bti\fg play f\bom selected 
time
ry
To	start	playing	at	any	chosen	time	on	the	file	or	title.
1.	 Press	m	INFO/DISPLAY	during	playback.
2.	 Press	WS	to	select	the	time	clock	icon	and“--:--:--” 	appears.
3.	 Input	the	required	start	time	in	hours,	minutes,	and	seconds	from	left	to	right.	If	you	enter	the	wrong	numbers,	press	CLEAR	to	remove	the	numbers	you	entered.	 Then	input	the	correct	numbers.	For	example,	to	find	a	scene	at	1	hour,	10	minutes,	and	20	seconds,	enter	 “11020”	by	using	numerical	buttons.
4.	 Press	b	ENTER	to	confirm.	Playback	starts	from	the	selected	time.
Resume playback
ryut
The	unit	records	the	point	where	you	pressed	the	\b	STOP	depending	on	the	disc.	If	“M\b	 (Resume 	Stop)” 	appears 	on 	the 	screen 	briefly,	press	d	PLAY, MONO/STEREO	to	resume	playback	(from	the	scene	point).	
If	you	press	\b	STOP	twice	or	unload	the	disc,	“\b”(Complete	Stop)	appears	on	the	screen.	 The	unit	will	clear	the	stopped	point.	
The	resume	point	may	be	cleared	when	a	
button	is	pressed	(for	example;	
1	(POWER),	
B 	OPEN/CLOSE,	etc).,
,Not\b
Cha\fgi\fg subtitle code page
y
If	the	subtitle	is	not	displayed	properly,	you	can	change	the	subtitle	code	page	to	view	the	subtitle	file	properly.
1.	 During	playback,	press	m	INFO/DISPLAY	to	display	the	On-Screen	display.
2.	 Use	WS	to	select	the	[Code	Page]	option.
3.	 Use	\fD	to	select	desired	code	option.
4.	 Press 	x	RETURN	to 	exit 	the 	On-Screen 	display.
HT806TQ-A2_DMARLLK_ENG_6869.indd   292010-12-16   �� 6:31:22 
						

							30
Op\brating4
Ope\bati\fg
Ma\bked Playback
ut
The	mark	function	enables	you	to	store	your	favourite	files	from	any	disc	or	USB	device	in	the	unit	memory.
1.	 Select	[Music]	on	the	[\fome	Menu].
Returning	to	the	upper	folder.	
(MP3/	WMA	only)
Moving	to	the	previous	or	 next	file	list.
Selecting	all	tracks/	files.
Deselecting	all	tracks/files.
File	information	will	be	displayed	
according
	to 	the 	ID3TAG 	information	
on	the	appropriate	music	file.	(MP3	
only)
2.	 Select	a	desired	music	on	the	[\bist]	by	using	the	WS	then	press	MARKER	to	appears	the	mark	on	the	list.
3.	 Press	b	ENTER	or	d	PLAY, MONO/STEREO.Displays	the	play	mode.
4.	 Select	the	play	mode	by	using	the	WS	and	press	b	ENTER.
[Mark Play]
Marked	playback.
[Curren\f Play]
Normal	playback.
If	you	want	to	select	all	files	on	the	list,	select	
[Select	All]	and	press	 b	ENTER.,
,Not\b
To delete a Ma\bke\b
1.	 Use	WS	to	select	the	track	that	you	wish	to	erase	from	the	marked	file.
2.	 Press	MARKER.
To delete all Ma\bke\bs
Use	WS\fD	to	select	[Deselect	All]	then	press	b	ENTER	in	program	edit	mode.
The	markers	are	also	cleared	when	the	disc	or	
USB	device	is	removed,	the	unit	is	switched	to	
power	off	or	the	function	is	switched	to	others.,
,Not\b
HT806TQ-A2_DMARLLK_ENG_6869.indd   302010-12-16   �� 6:31:22