LG Ht805th Owners Manual

							
1Operation
Operation
	4

ToDo this
Stop Press x (STOP)
PlaybackPress	B (PLAY), MONO/
STEREO.
PausePress X (PAUSE/STEP).
Frame-
by-Frame 
playback
Press X (PAUSE/STEP) 
repeatedly to play title 
Frame-by-Frame. (DVD, DivX 
only)
Skipping to 
the next/ 
previous 
chapter/ track/ 
file
During playback, press	
./> SKIP to go to 
the next chapter/ track/ 
file or to return to the 
beginning of the current 
chapter/ track/ file.
Press . SKIP twice 
briefly to step back to the 
previous chapter/ track/ file.
Locating a 
point quickly 
by playing 
a file in fast 
forward or fast 
reverse
During playback, press 
m/M SCAN repeatedly 
to select the required scan 
speed.
To return to normal speed, 
press B (PLAY), MONO/
STEREO.
Playing 
repeatedly or 
randomly
Press s REPEAT 
repeatedly, and the current 
title, chapter or track will be 
played back repeatedly or 
randomly. 
- DVD : Chapter/ Title/ Off
- DivX : Title/ All/ Off
-  Audio CD/ MP3/ WMA : 
Track/ All/ Random/ Off
Slowing down 
the playing 
speed
In the pause mode, press 
SLOW (bb or BB) to 
select the required speed. 
(DVD, DivX only) The DivX 
file cannot be slow down 
reverse playback.
Other Operations
Displaying Disc Information 
on-screen
You can display various information about the 
disc loaded on-screen.
1.  Press INFO/DISPLAY to show various 
playback information. 
The displayed items differ depending on 
the disc type or playing status.
2.  You can select an item by pressing U u and 
change or select the setting by pressing   
I i.
Title –   Current title number/ total number of 
titles.
Chapter –   Current chapter number/ total 
number of chapters.
Time – Elapsed playing time.
Audio –  Selected audio language or channel.
Subtitle – Selected subtitle.
Angle –  Selected angle/ total number of 
angles.
NOTE
If any button is not pressed for a few seconds, the on-screen display disappears.

HT805TH-D0_BGBRLL_ENG_4235.indd   312010-02-11   ¿ÀÈÄ 11:04:19 
						

							
Operation
Operation	4

To display the DVD Menu DVD
When you play a DVD which contains several 
menu, you can select the menu you want 
using the Menu.
1. Press DISC MENU. 
The disc’s menu appears.
2.  Select the menu by using U u I i.
3.  Press B (PLAY), MONO/STEREO to confirm.
To display the DVD title DVD
When you play a DVD which contains several 
title, you can select the title you want using the 
Menu.
1.  Press TITLE. 
The disc’s title appears.
2.  Select the menu by pressing U u I i.
3.  Press B (PLAY), MONO/STEREO to confirm.
1.5 times speed playback DVD
The 1.5 speed allows you to watch the pictures 
and listen to the sound quicker than playing at 
a normal speed.
1.  During playback, press B (PLAY), MONO/
STEREO to play at 1.5 times speed. “BX1.5” 
appears on the screen.
2.  Press B (PLAY), MONO/STEREO again to 
exit.
Screen Saver
The screen saver appears when you leave the 
unit in Stop mode for about five minutes.
 
Starting play from selected 
time DVD DivX
To start playing at any chosen time on the file 
or title.
1.  Press INFO/DISPLAY during playback.
2.  Press U u to select the time clock icon and 
“--:--:--” appears.
3.  Input the required start time in hours, 
minutes, and seconds from left to right. If 
you enter the wrong numbers, press CLEAR 
to remove the numbers you entered. Then 
input the correct numbers. 
For example, to find a scene at 1 hour, 10 
minutes, and 20 seconds, enter “11020” by 
using numerical buttons.
4.  Press  ENTER to confirm. Playback starts 
from the selected time.
Resume playback 
DVD DivX ACD MP3 WMA 
The unit records the point where you pressed 
the x (STOP) depending on the disc.  
If “Xx (Resume Stop)” appears on the screen 
briefly, press B (PLAY), MONO/STEREO to 
resume playback (from the scene point). 
If you press x (STOP) twice or unload the disc, 
“x”(Complete Stop) appears on the screen. 
The unit will clear the stopped point. 
NOTE
The resume point may be cleared when a button is pressed (for example; 1 (POWER),  Z OPEN/CLOSE, etc).

HT805TH-D0_BGBRLL_ENG_4235.indd   322010-02-11   ¿ÀÈÄ 11:04:19 
						

							
Operation
Operation
	4

Marked Playback ACD MP3 
WMA
The mark function enables you to store your 
favourite files from any disc or USB device in 
the unit memory.
1. Select [Music] on the [Home] menu.
Music menu
Returning to the upper 
folder. (MP3/ WMA only)
Moving to the previous or 
next file list.
Selecting all tracks/ files.
Deselecting all tracks/files.
File information will be displayed 
according to the ID3TAG 
information on the appropriate 
music file. (MP3 only)
2.  Select a desired music on the [List] by using 
the U u then press MARKER to appears the 
mark on the list.
3.  Press  ENTER or B (PLAY), MONO/
STEREO. 
Displays the play mode.
4.  Select the play mode by using the U u and 
press  ENTER.
[Mark Play]
Marked playback.
[Current Play]
Normal playback
NOTE
If you want to select all files on the list, select [Select All] and press  ENTER.
To delete a Marker
1.  Use U u to select the track that you wish to 
erase from the marked file.
2.  Press MARKER.
To delete all Markers
Use U u I i to select [Deselect All] then press 
 ENTER in program edit mode.
NOTE
The markers are also cleared when the disc or USB device is removed, the unit is switched to power off or the function is switched to others.
Changing subtitle code page 
DivX
If the subtitle is not displayed properly, you 
can change the subtitle code page to view the 
subtitle file properly.
1.  During playback, press INFO/DISPLAY to 
display the On-Screen display.
2.  Use U u to select the [Code Page] option.
3.  Use I i to select desired code option.
4.  Press O RETURN to exit the On-Screen 
display.

HT805TH-D0_BGBRLL_ENG_4235.indd   332010-02-11   ¿ÀÈÄ 11:04:20 
						

							
Operation
Operation	4

Viewing a PHOTO file JPG
This unit can play discs with photo files.
1. Select [Photo] on the [Home] menu and 
press  ENTER.
Photo menu
Moving to the previous or 
next file list.
Returning to the upper 
folder. 
2.  Press U u to select a folder, and then press 
 ENTER. 
3.  If you want to view a slide show, press U 
u to highlight a file and press B (PLAY), 
MONO/STEREO. 
About help menu in the [Photo] menu.
MenuButtonsOperation
BSlide 
Show
B (PLAY), 
MONO/
STEREO
Viewing a slide 
show.
vVbB 
MoveU u I i
Moving to 
another file or 
content.
 Select ENTERViewing a 
particular file.
O CloseO 
RETURN
Returning to 
the [Home] 
menu.
About help menu in the full screen.
MenuButtonsOperation
MenuINFO/
DISPLAY
Displaying the 
Option menu.
b/B
Prev./ NextI/iMoving to 
another file
O CloseO 
RETURN
Returning to 
the [Photo] 
menu.
Options while viewing a photo
You can use various options during viewing a 
photo in full screen.
1. 
While viewing a photo in full screen, press 
INFO/DISPLAY to display the option menu.
2.  Select an option using U u I i.
a
	 b	 c	 d	 e
aCurrent photo/ Total number of photos 
– Use I i to view previous/next photo.
bSlide Show N/ X– Press  ENTER to 
start or pause slide show.
cSpeed x3/ x2/ x1 – Use  ENTER to 
select a delaying speed between photos 
in a slide show.
dRotate – Press  ENTER to rotate the 
photo.
eGo to list – Press  ENTER to return 
[Photo] menu.

HT805TH-D0_BGBRLL_ENG_4235.indd   342010-02-11   ¿ÀÈÄ 11:04:20 
						

							
Operation
Operation
	4

Sleep Timer Setting
Press SLEEP one or more times to select delay 
time between 10 and 180 minutes, after the 
unit will turn off.
To check the remaining time, press SLEEP.
To cancel the sleep function, press SLEEP 
repeatedly until “SLEEP 10” appears, and then 
press SLEEP once again while “SLEEP 10” is 
displayed.
NOTE
You can check the remaining time before the Unit turns off.Press SLEEP The remaining time appears in the display window.
Dimmer
Press SLEEP once. The display window will 
be darken by half. To cancel it, press SLEEP 
repeatedly until dim off.
Turn off the sound temporarily
Press  MUTE to mute your unit.
You can mute your unit in order, for example, 
to answer the telephone, appears the MUTE in 
the display window.
Last Scene Memory DVD
This unit memorizes last scene from the last 
disc that is viewed. The last scene remains in 
memory even if you remove the disc from the 
unit or switch off the unit. If you load a disc 
that has the scene memorized, the scene is 
automatically recalled.
System Select - Optional
You must select the appropriate system mode 
for your TV system. Press and hold X (PAUSE/
STEP) for more than five seconds to be able 
to select a system in the [Home] menu. (PAL/ 
NTSC)
NOTE
If the USB device is connected or a disc is inserted, this function is not operated.
Adjust the speaker level 
settings
You can adjust the sound level of each speaker.
1. Press SPEAKER LEVEL repeatedly to select 
a desired speaker to set. 
2.  Press VOL -/+ to adjust the sound level of 
the selected speaker while the level setting 
memu is displayed on the display window.
3.  Repeat and adjust the sound level of the 
other speakers.

HT805TH-D0_BGBRLL_ENG_4235.indd   352010-02-11   ¿ÀÈÄ 11:04:20 
						

							
Operation
Operation	4

Radio Operations
Be sure that both FM aerials are connected. 
(Refer to the page 24)
Listening to the radio
1. Press t RADIO&INPUT until FM appears 
in the display window. 
The last received station is tuned in.
2.  Press and hold TUNING (-/+) for about 
two seconds until the frequency indication 
starts to change, then release. Scanning 
stops when the unit tunes in a station.
or
  Press 
TUNING (-/+) repeatedly.
3. Adjust the volume by rotating VOLUME on 
the front panel or by pressing VOL (+/- )on 
the remote control repeatedly. 
Presetting the Radio Stations
You can preset 50 stations for FM.
Before tuning, make sure that you have turned 
down the volume.
1.  Press t RADIO&INPUT until FM appears 
in the display window.
2.  Select the desired frequency by using 
TUNING (-/+)
3.  Press  ENTER a preset number will flash 
in the display window.
4.  Press PRESET (-/+) to select the preset 
number you want.
5.  Press  ENTER.  
The station is stored.
6.  Repeat the steps 2 to 5 to store other 
stations.
Deleting all the saved stations
1.  Press and hold CLEAR for two seconds.  
"ERASE ALL" will flash up on the unit display. 
2.  Press CLEAR to erase all saved of the radio 
stations.
Deleting a saved station
1.  Press PRESET - / + to Select a preset 
number you want to delete.
2.  Press CLEAR, the preset number will blink 
in the display window.
3.  Press CLEAR again, to delete the selectd 
preset number.
Improving poor FM reception
Press B (PLAY), MONO/STEREO on the 
remote control. This will change the tuner 
from stereo to mono and usually improve the 
reception.

HT805TH-D0_BGBRLL_ENG_4235.indd   362010-02-11   ¿ÀÈÄ 11:04:20 
						

							
Operation
Operation
	4

Seeing information about a radio 
station
The FM tuner is supplied with the RDS (Radio 
Data System) facility. This shows information 
about the radio station being listened to. Press 
RDS repeatedly to cycle through the various 
data types. :
PS     (Programme Service Name) 
The name of the channel will appear 
in the display
PTY     (Programme Type Recognition) 
The programme type (e.g. Jazz or 
News) will appear in the display.
RT     (Radio Text)  
A text message contains special 
information from the broadcast 
station. This text may scroll across 
the display.
CT     ( Time controlled by the channel) 
This shows the time and date as 
broadcast by the station.
You can search the radio stations by 
programme type by pressing RDS. The display 
will show the last PTY in use. Press PTY 
one or more times to select your preferred 
programme type. Press I i. The tuner will 
search automatically, when a station is found 
the search will stop.

HT805TH-D0_BGBRLL_ENG_4235.indd   372010-02-11   ¿ÀÈÄ 11:04:20 
						

							
Operation
Operation	4

Sound adjustment
Setting the surround mode
This system has a number of pre-set surround 
sound fields. You can select a desired sound 
mode by using SOUND EFFECT.
You can change the SOUND EFFECT using 
I i arrow key while the sound effect 
information is displayed on.
The displayed items for the equalizer maybe 
different depending on sound sources and 
effects.
On DisplayDescription
NAT PLUS
You can enjoy the natural 
sound effect same as a 
5.1-channel.
NATURAL You can enjoy comfortable 
and natural sound
Local 
specialization 
equalizer 
Regionally optimized 
sound effect. (DANGDUT/ 
ARABIC/ PERSIAN/ INDIA/ 
REGUETON/ MERENGUE/
 SAMBA/ SALSA/ CUMBIA/ 
AFRO)
AUTO EQ
Realizes the sound equalizer 
that is the most similar 
to the genre of which is 
included in the MP3 ID3 tag 
of song files.
POP
CLASSIC
JAZZ
ROCK
This program lends an 
enthusiastic atmosphere to 
the sound, giving you the 
feeling you are at an actual 
rock pop, jazz or classic 
concert.
On DisplayDescription
MP3 OPT
This function is optimized 
for compressible MP3, WMA 
file. It improves the treble 
sound.
BASS
During playback, reinforce 
the treble, bass and 
surround sound effect.
LOUDNESSImproves the bass and 
treble sound.
VIRTUALYou can enjoy more virtual 
surround sound.
PLII MOVIE
PLII MUSIC
Dolby Pro Logic II enables 
you to play stereo source on 
5.1-channel.
BYPASSYou can enjoy the sound 
without equalizer effect.
NOTE
• In some of surround modes, some speakers, there's no sound or low sound. It depends on the mode of surround and the source of audio, it is not defective.
•  You may need to reset the surround mode, 
after switching the input, sometimes even after the sound track changed.
 

HT805TH-D0_BGBRLL_ENG_4235.indd   382010-02-11   ¿ÀÈÄ 11:04:20 
						

							
Operation
Operation
	4

Advanced Operations
Recording to USB
You can record music or sound souce to USB 
device by connecting in to the port on the 
unit.
1. Connect the USB device to the unit.
2.  Select a mode in which you want to record. 
Play back a sound source first.
3.  Start the recording by pressing z REC.
4.  To stop recording, press x (STOP).
[All tracks/ files recording] 
Record to USB in stop or play mode.
[Program list recording] 
After marking desired file(s) and you can 
record it to USB (Refer to the page 33).
It'll be stored as follows
Audio CD
MP3/ WMA
The other 
sources 
(Tuner, AUX, 
Portable)
NOTE
•  You can check the recording percentage rate for the USB record on the screen during the recording. (Audio CD or MP3/ WMA CD only)
•  During recording MP3/WMA, there is no 
sound.
•  When you stop recording during playback, the 
file that has been recorded at that time will be stored. (Audio CD only)
•  Do not remove the USB device or turn off 
the unit during USB recording. If not, an incomplete file may be made and not deleted on PC.
•  If USB recording does not work, the message 
like “NO USB”, “ERROR”, “USB FULL” or “NO REC” is displayed on the display window.
•  Multi card reader divice or external HDD can 
not be used for USB recording.
•  A file is recorded by 128 Mbyte (about 2 hours) 
when you record for a long term. There are recorded less than 4 files.
•  When you stop recording during playback, the 
file will not be stored.
•  In the state CD-G, DTS disc USB record is not 
operated.
•  The files in the sub-folders are not recorded 
during all track recording.
•  You may not record more than 999 files.
•  The nunbering of the recording file is entered 
from the lowest number. So if you delete some of the recording files, the next recording file could be the lowest number among them.
The making of unauthorized copies of copy-protected material, including computer programs, files, broadcasts and sound recordings, may be an infringement of copyrights and constitute a criminal offense. This equipment should not be used for such purposes.Be responsible Respect copyrights.

HT805TH-D0_BGBRLL_ENG_4235.indd   392010-02-11   ¿ÀÈÄ 11:04:20 
						

							
0Maintenance
Maintenance	5
Notes on Discs
Handling Discs
Never stick paper or tape on the disc.
Storing Discs
After playing, store the disc in its case. Do not 
expose the disc to direct sunlight or sources of 
heat and never leave it in a parked car exposed 
to direct sunlight.
Cleaning Discs
Do not use strong solvents such as alcohol, 
benzine, thinner, commercially available 
cleaners, or anti-static spray intended for older 
vinyl records.
Handling the Unit
When shipping the unit
Please save the original shipping carton and 
packing materials. If you need to ship the unit, 
for maximum protection, re-pack the unit as it 
was originally packed at the factory.
Keeping the exterior surfaces clean
• Do not use volatile liquids such as 
insecticide spray near the unit. 
•  Wiping with strong pressure may damage 
the surface.
•  Do not leave rubber or plastic products in 
contact with the unit for a long period of 
time.
Cleaning the unit
To clean the player, use a soft, dry cloth. If 
the surfaces are extremely dirty, use a soft 
cloth lightly moistened with a mild detergent 
solution. Do not use strong solvents such as 
alcohol, benzine, or thinner, as these might 
damage the surface of the unit.
Maintaining the Unit
The unit is a high-tech, precision device. If 
the optical pick-up lens and disc drive parts 
are dirty or worn, the picture quality could be 
diminished. For details, please contact your 
nearest authorized service center.
5
Maintenance

HT805TH-D0_BGBRLL_ENG_4235.indd   402010-02-11   ¿ÀÈÄ 11:04:21