LG Ht805th Owners Manual

1Installation
Installation
	3

Resolution Setting
The unit provides several output resolutions for 
HDMI OUT and COMPONENT VIDEO OUT jacks. 
You can change the resolution using [Setup] 
menu.
1. 
Press  HOME.
2. 
Use I/i to select the [Setup] and press  
ENTER. The [Setup] menu appears.
3. Use U/u to select [Display] option then 
press i to move to the second level. 
4. 
Use U/u to select the [Resolution] option 
then press i to move to the third level.
5. 
Use U/u to select the desired resolution...

Installation
Installation	3

Optional Equipment 
Connection
AUX IN Connection
Connect an Output of auxiliary device to the 
AUX (L/R) INPUT Connector.
AUX IN Connection
Unit
Red
White
To the audio output jacks of your component  (TV, VCR, etc.)
NOTE
If your TV has only one output for audio (mono), connect it to the left (white) audio jack on the unit.
AUDIO (PORT. IN) In 
Connection
Connect an output of portable device (MP3 
or PMP etc) to the AUDIO (PORT. IN) input 
connector. 
PORT.IN...

Installation
Installation
	3

USB Connection
Connect the USB port of USB Memory (or MP3 
player, etc.) to the USB port on the front of the 
unit.
USB Connection
Removing the USB Device from the unit
1.  Choose a different function mode or 
press STOP (x) twice in a row.
2.   Remove the USB device from the unit.
Compatible USB Devices
• MP3 Player : Flash type MP3 player.
•  USB Flash Drive :   Devices that support 
USB2.0 or USB1.1. 
•  The USB function of this unit does not 
support some USB...

Installation
Installation	3

OPTICAL IN connection
Connect an optical output of Unit (or Digital 
Device etc) to the OPTICAL IN connector.
OPTICAL IN Connection
To the digital optical output jack of your component
Home theater speaker ez setup
Listen to sound from TV, DVD and Digital 
Device with 5.1(2.1 or 2)ch mode. Even in 
power off mode, if you press OPTICAL, then 
power is on and automatically changed to AUX 
OPT mode.
1. Connect the unit’s OPTICAL IN jack to jack 
on optical out of your...

Installation
Installation
	3

Adjust the setup 
settings
By using the Setup menu, you can make 
various adjustments to items such as picture 
and sound.
You can also set a language for the subtitles 
and the Setup menu, among other things. For 
details on each Setup menu item, see pages 25 
to 29.
OSD Initial language settings
During the first use of this unit, the initial 
language setup menu appears on your TV 
screen. You must complete initial language 
selection before using the unit....

Installation
Installation	3

Language
Menu Language
Select a language for the Setup menu and 
then on screen display.
Disc Audio / Disc Subtitle / Disc 
Menu
Select the language you prefer for the audio 
track (disc audio), subtitles, and the disc menu.
[Original]
Refers to the original language in which the 
disc was recorded.
[Other]
To select another language, press numeric 
buttons and then  ENTER to enter the 
corresponding 4-digit number according 
to the language code list on the page...

Installation
Installation
	3

[1080i]
Outputs 1080 lines of interlaced video.
[720p]
Outputs 720 lines of progressive video.
[480p (or 576p)]
Outputs 480 (or 576) lines of progressive 
video.
[480i (or 576i)]
Outputs 480 (or (576) lines of interlaced 
video.
Audio
5.1 Speaker Setup
Make the following settings for the built-in 5.1 
channel surround decoder.
1. Select [5.1 Speaker Setup] on the [Audio] 
menu.
2.  Press  ENTER. 
The [5.1 Speaker setup] appears.
3.  Use I i to select the desired...

Installation
Installation	3

DRC (Dynamic Range Control) 
Make the sound clear when the volume is 
turned down (Dolby Digital only). Set to [On] 
for this effect.
Vocal 
Select [On] to mix karaoke channels into 
normal stereo.
This function is effective for multi-channel 
karaoke DVDs only.
HD AV Sync
Sometimes Digital TV encounters a delay 
between  picture and sound. If this happens 
you can compensate by setting a delay on the 
sound so that it effectively ‘waits’ for the picture 
to...

Installation
Installation
	3

Password
You can enter or change password.
1. Select [Password] on the [Lock] menu and 
then press i.
2.  Press  ENTER.
3.  Input a password and press  ENTER.
  To change the password, press 
 ENTER 
when the [Change] option is highlighted. 
Input a password and press  ENTER. Enter 
it again and press  ENTER to verify.
4. Press  HOME to exit the menu.
NOTE
If you forget your password, you can clear it using the following steps:
1.  Select the [Setup] menu on...

0Operation
Operation	4

4
Operation
Using the Home Menu
1. Press  HOME. 
Displays the [Home] menu.
2.  Select an option by using I i. 
3.  Press  ENTER then selected option menu.
[Music] – Displays [MUSIC] menu.
[Movie] – Start video media’s playback or 
displays the [MOVIE] menu.
[Photo] – Displays [PHOTO] menu.
[Setup] – Displays the [Setup] menu.
NOTE
You can not select the [Music], [Movie] or [Photo] option when the USB device is not connected or a disc is not inserted.
Basic Operations
1....