LG Ht805sh Owners Manual

							
1Installation
Installation
	3

OPTICAL In connection
Connect an optical output of Unit (or Digital 
Device etc) to the OPTICAL IN connector.
OPTICAL IN Connection
To the digital optical output jack of your component
Home theater speaker ez setup
Listen to sound from TV, DVD and Digital 
Device with 5.1(2.1 or 2)ch mode. Even in 
power off mode, if you press OPTICAL, then 
power is on and automatically changed to AUX 
OPT mode.
1. Connect the unit’s OPTICAL IN jack to jack 
on optical out of your TV (or Digital Device 
etc.).
2.  Select the AUX OPT by using the OPTICAL. 
To select the AUX OPT directly
3.  Listen sound with 5.1(2.1 or 2)ch speaker.
4.  To escape from AUX OPT by using the 
OPTICAL. 
Function is retuned to previous one.
Antenna Connection
Connect the supplied FM/AM antenna for 
listening to the radio.
Connect the AM Loop antenna to the AM 
antenna connector.
Connect the FM Wire antenna to the FM 
antenna connector.
Antenna Connection
NOTE
•  To prevent noise pickup, keep the AM Loop antenna away from the unit and other components.
•  Be sure to fully extend the FM wire antenna. 
After connecting the FM wire antenna, keep it as horizontal as possible.

HT805SH-A2_DZAFLLK_ENG_4251.indd21   212010-02-12   ¿ÀÈÄ 4:23:16 
						

							
Installation
Installation	3

Adjust the setup 
settings
By using the Setup menu, you can make 
various adjustments to items such as picture 
and sound.
You can also set a language for the subtitles 
and the Setup menu, among other things. For 
details on each Setup menu item, see pages 22 
to 26.
OSD Initial language settings
During the first use of this unit, the initial 
language setup menu appears on your TV 
screen. You must complete initial language 
selection before using the unit. English will be 
selected as the initial language.
1. Press 1 (POWER) to turn the unit on. The 
language setup menu will appear on the 
screen.
2.  Use U u I i to select a language then 
press  ENTER.  
The confirm menu will appear.
3.  Use I i to select the [Enter] then press  
ENTER to finish the language setup.
To display and exit the Setup 
menu
1.  Press  HOME. 
Displays the [Home] Menu.
2.  Select an [Setup] by using I i.
3.  Press  ENTER. 
Displays the [Setup]
4.  Press  HOME or O RETURN to exit in 
the [Setup] Menu.
About help menu for Setup
MenuButtons Operation
v V
MoveU uMoving to another 
menu.
b 
MoveIMoving to previous 
level.
B 
Movei
Moving to next level 
or selecting menu.
O 
Close
O 
RETURN
To exit the [Setup] 
menu or [ 5.1 
Speaker Setup].
  
Select ENTERTo confirm menu.

HT805SH-A2_DZAFLLK_ENG_4251.indd22   222010-02-12   ¿ÀÈÄ 4:23:17 
						

							
Installation
Installation
	3

Language
Menu Language
Select a language for the Setup menu and then on 
screen display.
Disc Audio / Disc Subtitle / Disc Menu
Select the language you prefer for the audio track 
(disc audio), subtitles, and the disc menu.
[Original]
Refers to the original language in which the 
disc was recorded.
[Other]
To select another language, press numeric 
buttons and then  ENTER to enter the 
corresponding 4-digit number according to the 
language code list on the page 38. If you enter 
the wrong language code, press CLEAR.
[Off (for Disc Subtitle)]
Turn off Subtitle.
Display
TV Aspect
Select which screen aspect to use based on the 
shape of your TV screen. 
[4:3]
Select when a standard 4:3 TV is connected.
[16:9]
Select when a 16:9 wide TV is connected.
Display Mode
The Display Mode setting works only when the TV 
Aspect mode is set to 4:3.
[Letterbox]
Displays a wide picture with bands on the 
upper and lower portions of the screen.
[Panscan]
Automatically displays the wide picture on the 
entire screen and cuts off the portions that do 
not fit. (If the disc/file is not compatible with 
Pan Scan, the picture is displayed at Letterbox 
ratio.)
Resolution
Sets the output resolution of the Component and 
HDMI video signal. Refer to “Resolution Setting” for 
details about the resolution (page 18).
[Auto]
If the HDMI OUT jack is connected to 
TVs providing display information (EDID), 
automatically selects the resolution best suited 
to the connected TV. If the COMPONENT 
VIDEO OUT is only connected, this changes the 
resolution to 480i (or 576i) as default resolution.
[1080p]
Outputs 1080 lines of progressive video.
[1080i]
Outputs 1080 lines of interlaced video.
[720p]
Outputs 720 lines of progressive video.
[480p (or 576p)]
Outputs 480 (or 576) lines of progressive video.
[480i (or 576i)]
Outputs 480 (or (576) lines of interlaced video.

HT805SH-A2_DZAFLLK_ENG_4251.indd23   232010-02-12   ¿ÀÈÄ 4:23:17 
						

							
Installation
Installation	3

Audio
5.1 Speaker Setup
Make the following settings for the built-in 5.1 
channel surround decoder.
1. Select [5.1 Speaker Setup] on the [Audio] 
menu.
2.  Press  ENTER. 
The [5.1 Speaker setup] appears.
3.  Use I i to select the desired speaker.
4.  Adjust options using U u I i buttons.
5.  Returns to the previous menu by pressing 
O RETURN.
[Speaker selection]
Select a speaker that you want to adjust.
NOTE
Certain speaker settings are prohibited by the Dolby Digital licensing agreement.
[Size]
Since the speaker settings are fixed, you 
cannot change the settings.
[Volume]
Press I i to adjust the output level of the 
selected speaker.
Front L/R : 0 ~ -5 
SubWoofer, Rear L/R, Center : 5 ~ -5
[Distance]
After you connected speakers to your unit, 
set the Distance between the speakers and 
your listening point if the distance of Center 
or Rear speakers is bigger than the distance 
of Front speakers. This allows the sound 
from each speaker to reach the listener 
at the same time. Press I i to adjust the 
Distance of the selected speaker. This 
distance is equivalent to a difference of the 
distance between Center or Rear speaker 
and Front speakers.
[Test]
Select [Speaker Test Start] by using the U u 
and press  ENTER. Press  ENTER again 
to stop. Adjust the volume to match the 
volume of test signals memorized in the 
system.

HT805SH-A2_DZAFLLK_ENG_4251.indd24   242010-02-12   ¿ÀÈÄ 4:23:17 
						

							
Installation
Installation
	3

DRC (Dynamic Range Control) 
Make the sound clear when the volume is 
turned down (Dolby Digital only). Set to [On] 
for this effect.
Vocal 
Select [On] to mix karaoke channels into 
normal stereo.
This function is effective for multi-channel 
karaoke DVDs only.
HD AV Sync
Sometimes Digital TV encounters a delay 
between  picture and sound. If this happens 
you can compensate by setting a delay on the 
sound so that it effectively ‘waits’ for the picture 
to arrive: this is called HD AV Sync. Use U u 
(on the remote control) to scroll up and down 
through the delay amount, which you can set 
at anything between 0 and 300m sec.
Semi Karaoke 
When a chapter/ title/ track is fully finished, this 
function shows the score in the screen with a 
fanfare sound.
[On]
When you finished singing a score will 
appear on the screen.
[Off ]
Fanfare and score do not appears on the 
screen.
NOTE
•  DVD, DVD Karaoke discs with more than 2 tracks are available discs for the this function.
•   When you watch movies, “off ” the Semi 
Karaoke at the SETUP menu or enjoy it without connecting the MIC if the fanfare or score appears during changing a chapter.
•   This function operate on the DVD/CD mode.
•   The Semi Karaoke function is available only 
when a microphone is connected. 
Lock (Parental Control)
Initial Setting the Area Code:
When you use this unit for the first time, you 
have to set the Area Code.
1. Select the [Lock] menu and then press i.
2.  Press i. 
To access the [Lock] options, you must 
input the password you have created. Input 
a password and press  ENTER. Enter it 
again and press  ENTER to verify. If you 
make a mistake before pressing  ENTER, 
press CLEAR.
3.  Select the first character using U u buttons.
4.  Press  ENTER and select the second 
character using U u buttons.
5.  Press  ENTER to confirm your Area code 
selection.
Rating
Blocks playback of rated DVDs based on their 
contents. Not all discs are rated.
1.  Select [Rating] on the [Lock] menu then 
press i.
2.  Input a password and press  ENTER.
3.  Select a rating from 1 to 8 using the U u 
buttons.
[Rating 1-8]
Rating one (1) has the most restrictions and 
rating eight (8) is the least restrictive.
[Unlock]
If you select unlock, parental control is not 
active and the disc plays in full.
4.  Press  ENTER to confirm your rating 
selection.

HT805SH-A2_DZAFLLK_ENG_4251.indd25   252010-02-12   ¿ÀÈÄ 4:23:17 
						

							
Installation
Installation	3
Password
You can enter or change password.
1. Select [Password] on the [Lock] menu and 
then press i.
2.  Press  ENTER.
3.  Input a password and press  ENTER.
  To change the password, press 
 ENTER 
when the [Change] option is highlighted. 
Input a password and press  ENTER. Enter 
it again and press  ENTER to verify.
4. Press  HOME to exit the menu.
NOTE
If you forget your password, you can clear it using the following steps:
1.  Select the [Setup] menu on the [Home] menu.
2.  Input the 6-digit number “210499” and press 
 ENTER. The password is cleared.
Area Code
Enter the code of the area whose standards 
were used to rate the DVD video disc, based 
on the list on page 39.
1. Select [Area Code] on the [Lock] menu then 
press i.
2.  Input a password and press  ENTER.
3.  Select the first character using U u buttons.
4.  Press  ENTER and select the second 
character using U u buttons.
5.  Press  ENTER to confirm your Area code 
selection.
Others
DivX VOD
We provide you with the DivX® VOD ( Video On 
Demand) registration code that allows you to 
rent and purchase videos using the DivX® VOD 
service.
For more information, visit www.divx.com/vod.
Press  ENTER when [DivX(R) VOD] is 
highlighted and you can view the registration 
code of the unit.
NOTE
All the downloaded videos from DivX VOD can only be played back on this unit.

HT805SH-A2_DZAFLLK_ENG_4251.indd26   262010-02-12   ¿ÀÈÄ 4:23:17 
						

							
Operation
Operation
	4
4
Operation
Using the Home Menu
1. Press  HOME. 
Displays the [Home] menu.
2.  Select an option by using I i. 
3.  Press  ENTER then selected option menu.
[Music] – Displays [MUSIC] menu.
[Movie] – Start video media’s playback or 
displays the [MOVIE] menu.
[Photo] – Displays [PHOTO] menu.
[Setup] – Displays the [Setup] menu.
NOTE
You can not select the [Music], [Movie] or [Photo] option when the USB device is not connected or a disc is not inserted.
Basic Operations
1.  Insert the disc by using the Z OPEN/
CLOSE or Connect the USB device to the 
USB port.
2.  Press  HOME. 
Displays the [Home] Menu.
3.  Select an option by using I i. 
If you select the [Movie], [Photo] or [Music] 
option when you connect up to two 
devices, it appears as belows. Select a 
media then press  ENTER. 
4.  Press  ENTER then selected option menu.
NOTE
•   For the most Audio CD and DVD-ROM discs, playback starts automatically.
•   The unit plays only music file contained in the 
USB storage device or disc automatically.

HT805SH-A2_DZAFLLK_ENG_4251.indd27   272010-02-12   ¿ÀÈÄ 4:23:17 
						

							
Operation
Operation	4

ToDo this
Stop Press x (STOP)
PlaybackPress	B (PLAY), MONO/
STEREO.
PausePress X (PAUSE/STEP).
Frame-
by-Frame 
playback
Press X (PAUSE/STEP) 
repeatedly to play title 
Frame-by-Frame. (DVD, DivX 
only)
Skipping to 
the next/ 
previous 
chapter/ track/ 
file
During playback, press	
./> SKIP to go to 
the next chapter/ track/ 
file or to return to the 
beginning of the current 
chapter/ track/ file.
Press . SKIP twice 
briefly to step back to the 
previous chapter/ track/ file.
Locating a 
point quickly 
by playing 
a file in fast 
forward or fast 
reverse
During playback, press 
m/M SCAN repeatedly 
to select the required scan 
speed.
To return to normal speed, 
press B (PLAY), MONO/
STEREO.
Playing 
repeatedly or 
randomly
Press s REPEAT 
repeatedly, and the current 
title, chapter or track will be 
played back repeatedly or 
randomly. 
 DVD : Chapter/ Title/ Off
- DivX : Title/ All/ Off
-  Audio CD/ MP3/ WMA : 
Track/ All/ Random/ Off
Slowing down 
the playing 
speed
In the pause mode, press 
SLOW (bb or BB) to 
select the required speed. 
(DVD, DivX only) The DivX 
file cannot be slow down 
reverse playback.
Other Operations
Displaying Disc Information 
on-screen
You can display various information about the 
disc loaded on-screen.
1.  Press  INFO/DISPLAY to show various 
playback information. 
The displayed items differ depending on 
the disc type or playing status.
2.  You can select an item by pressing U u and 
change or select the setting by pressing   
I i.
Title –   Current title number/ total number of 
titles.
Chapter –   Current chapter number/ total 
number of chapters.
Time – Elapsed playing time.
Audio –  Selected audio language or channel.
Subtitle – Selected subtitle.
Angle –  Selected angle/ total number of 
angles.
NOTE
If any button is not pressed for a few seconds, the on-screen display disappears.

HT805SH-A2_DZAFLLK_ENG_4251.indd28   282010-02-12   ¿ÀÈÄ 4:23:17 
						

							
Operation
Operation
	4

To display the DVD Menu DVD
When you play a DVD which contains several 
menu, you can select the menu you want 
using the Menu.
1. Press DISC MENU. 
The disc’s menu appears.
2.  Select the menu by using U u I i.
3.  Press B (PLAY), MONO/STEREO to confirm.
To display the DVD title DVD
When you play a DVD which contains several 
title, you can select the title you want using the 
Menu.
1.  Press TITLE. 
The disc’s title appears.
2.  Select the menu by pressing U u I i.
3.  Press B (PLAY), MONO/STEREO to confirm.
1.5 times speed playback DVD
The 1.5 speed allows you to watch the pictures 
and listen to the sound quicker than playing at 
a normal speed.
1.  During playback, press B (PLAY), MONO/
STEREO to play at 1.5 times speed. “BX1.5” 
appears on the screen.
2.  Press B (PLAY), MONO/STEREO again to 
exit.
Screen Saver
The screen saver appears when you leave the 
unit in Stop mode for about five minutes.
 
Starting play from selected 
time DVD DivX
To start playing at any chosen time on the file 
or title.
1.  Press INFO/DISPLAY during playback.
2.  Press U u to select the time clock icon and 
“--:--:--” appears.
3.  Input the required start time in hours, 
minutes, and seconds from left to right. If 
you enter the wrong numbers, press CLEAR 
to remove the numbers you entered. Then 
input the correct numbers. 
For example, to find a scene at 1 hour, 10 
minutes, and 20 seconds, enter “11020” by 
using numerical buttons.
4.  Press  ENTER to confirm. Playback starts 
from the selected time.
Resume playback 
DVD DivX ACD MP3 WMA 
The unit records the point where you pressed 
the x (STOP) depending on the disc.  
If “Xx (Resume Stop)” appears on the screen 
briefly, press B (PLAY), MONO/STEREO to 
resume playback (from the scene point). 
If you press x (STOP) twice or unload the disc, 
“x”(Complete Stop) appears on the screen. 
The unit will clear the stopped point. 
NOTE
The resume point may be cleared when a button is pressed (for example; 1 (POWER),  Z OPEN/CLOSE, etc).

HT805SH-A2_DZAFLLK_ENG_4251.indd29   292010-02-12   ¿ÀÈÄ 4:23:17 
						

							
0Operation
Operation	4

Marked Playback ACD MP3 
WMA
The mark function enables you to store your 
favourite files from any disc or USB device in 
the unit memory.
1. Select [Music] on the [Home] menu.
Music menu
Returning to the upper 
folder. (MP3/ WMA only)
Moving to the previous or 
next file list.
Selecting all tracks/ files.
Deselecting all tracks/files.
File information will be displayed 
according to the ID3TAG 
information on the appropriate 
music file. (MP3 only)
2.  Select a desired music on the [List] by using 
the U u then press MARKER to appears the 
mark on the list.
3.  Press  ENTER or B (PLAY), MONO/
STEREO. 
Displays the play mode.
4.  Select the play mode by using the U u and 
press  ENTER.
[Mark Play]
Marked playback.
[Current Play]
Normal playback
NOTE
If you want to select all files on the list, select [Select All] and press  ENTER.
To delete a Marker
1.  Use U u to select the track that you wish to 
erase from the marked file.
2.  Press MARKER.
To delete all Markers
Use U u I i to select [Deselect All] then press 
 ENTER in program edit mode.
NOTE
The markers are also cleared when the disc or USB device is removed, the unit is switched to power off or the function is switched to others.
Changing subtitle code page 
DivX
If the subtitle is not displayed properly, you 
can change the subtitle code page to view the 
subtitle file properly.
1.  During playback, press INFO/DISPLAY to 
display the On-Screen display.
2.  Use U u to select the [Code Page] option.
3.  Use I i to select desired code option.
4.  Press O RETURN to exit the On-Screen 
display.

HT805SH-A2_DZAFLLK_ENG_4251.indd30   302010-02-12   ¿ÀÈÄ 4:23:18