LG Ht306pd Owners Manual

							System Setti\fg21
System Setting3
DRC (Dy\famic Ra\fge Co\ft\bol) 
Make	the	sound	clear	when	the	volume	is	turned	down	(Dolby	Digital	only).	Set	to	[On]	for	this	effect.
Vocal 
Select	[On]	to	mix	karaoke	channels	into	normal	stereo.
This	function	is	effective	for	multi-channel	karaoke	DVDs	only.
HD AV Sy\fc
Sometimes	Digital	TV	encounters	a	delay	between	picture	and	sound.	If	this	happens	you	can	compensate	by	setting	a	delay	on	the	sound	so	that	it	effectively	‘waits’	for	the	picture	to	arrive:	this	is	called	\fD	AV	Sync.	Use	WS (on	the	remote	control)	to	scroll	up	and	down	through	the	delay	amount,	which	you	can	set	at	anything	between	0	and	300m	sec.
Semi Ka\baoke
When	a	chapter/	title/	track	is	fully	finished,	this	function	shows	the	score	in	the	screen	with	a	fanfare	sound.
[On]
When	you	finished	singing	a	score	will	appear	on	the	screen.
[Off ]
Fanfare	and	score	do	not	appears	on	the	screen.
	
y DVD,	DVD	Karaoke	discs	with	more	than	
2	tracks	are	available	discs	for	the	this	
function.
	
y When	you	watch	movies,	
“off	”	the	Semi	
Karaoke	at	the	SETUP	menu	or	enjoy	it	
without	connecting	the	MIC	if	the	fanfare	
or	score	appears	during	changing	a	
chapter. 
,Note
LOCK (Pa\be\ftal Co\ft\bol)
I\fitial Setti\fg of the A\bea Code:
When	you	use	this	unit	for	the	first	time,	you	have	to	set	the	Area	Code.
1.	 Select	the	[\bock]	menu	and	then	press	\b.
2.	 Press	\b.To	access 	the	[\bock]	options,	you	must 	input	the	password	you	have	created.	Input	a	password	and	press	ENTER.	Enter	it	again	and	press	ENTER	to	verify.	If	you	make	a	mistake	before	pressing	ENTER,	press	CLEAR.
3.	 Select	the	first	character	using	WS	buttons.
4.	 Press	ENTER	and	select	the	second	character	using	WS buttons.
5.	 Press	ENTER	to	confirm	your	Area	code	selection.
Rati\fg
Blocks	playback	of	rated	DVDs	based	on	their	contents.	Not	all	discs	are	rated.
1.	 Select	[Rating]	on	the	[\bock]	menu	then	press	\b.
2.	 Input	a	password	and	press	ENTER.
3.	 Select	a	rating	from	1	to	8	using	the	WS buttons.
[Ra\fing 1-8]
Rating	one	(1)	has	the	most	restrictions	and	rating	eight	(8)	is	the	least	restrictive.
[Unlock]
If	you	select	unlock,	parental	control	is	not	active	and	the	disc	plays	in	full.
4.	 Press	ENTER	to	confirm	your	rating	selection.
HT306PD-A2_DEGYLLK_ENG_5743.indd   212011-06-22   �� 10:11:55 
						

							4	 Operating
System Setti\fg22
System Setting3
Passwo\bd
You	can	enter	or	change	password.
1.	 Select	[Password]	on	the	[\bock]	menu	and	then	press	\b.
2.	 Input	a	password	and	press	ENTER.
	 To	change	the	password,	press	ENTER	when	the	[Change]	option	is	highlighted.	Input	a	password	and	press	ENTER.	Enter	it	again	and	press	ENTER	to	verify.
3.	 Press	SETUP	to	exit	the	menu.
If you forge\f your passwor\b, you can clear 
i\f using \fhe following s\feps:
1.	 Press SETUP	to	display	the	Setup	menu.
2.	 Input	the	6-digit	number	“210499”	and	
press	ENTER.	 The	password	is	cleared. 
,Note
A\bea Code
Enter	the	code	of	the	area	whose	standards	were	used	to	rate	the	DVD	video	disc,	based	on	the	list	on	page	33.
1.	 Select	[Area	Code]	on	the	[\bock]	menu	then	press	\b.
2.	 Input	a	password	and	press	ENTER.
3.	 Select	the	first	character	using	WS	buttons.
4.	 Press	ENTER	and	select	the	second	character	using	WS	buttons.
5.	 Press	ENTER	to	confirm	your	Area	code	selection.
OTHERS
DivX(R) VOD
ABOUT	DIVX	 VIDEO:	DivX®	is	a	digital	video	format	created	by	DivX,	Inc.	 This	is	an	official	DivX	Certified®	device	that	plays	DivX	video.	 Visit	www.divx.com	for	more	information	and	software	tools	to	convert	your	files	into	DivX	video.
ABOUT	DIVX	VIDEO-ON-DEMAND:	 This	DivX	Certified®	device 	must 	be 	registered 	in 	order 	to 	play	purchased	DivX	 Video-on-Demand	( VOD)	movies.	To	obtain	your	registration	code,	locate	the	DivX	VOD	section	in	your	device	setup	menu.	Go	to	vod.divx.com	for	more	information	on	how	to	complete	your	registration.
[Regis\fer]
Displays	the 	registration 	code 	of 	your 	unit.
[Deregis\fer]
Deactivate	your	unit	and	display	the	deactivation	code.
All	the	downloaded	videos	from	DivX	 VOD	
can	only	be	played	back	on	this	unit. 
,Note
HT306PD-A2_DEGYLLK_ENG_5743.indd   222011-06-22   �� 10:11:55 
						

							4	 Operating
Ope\bati\fg23
Operating4
Basic Ope\batio\fs
1.	 Insert	the	disc	by	pressing	OPEN/CLOSE	or	connect	the	USB	device	to	the	USB	port.
2.	 Select	the	DVD/	CD	or	USB	function	by	pressing	FUNCTION.
3.	 Select	a	file	(or	track/	title)	you	want	to	play	by	pressing	WSA\b.
When	playing	a	disc	or	USB	Flash	Drive	
containing	with	DivX,	MP3/	WMA	and	JPEG	
files	together,	you	can	select	menu	of	files	
which	you	would	like	to	play	by	pressing	
MENU.	If		 “ This	file	has	non-supported	type	
on	the	unit” 	pops	up,	select	an	appropriate	file	
by	pressing	MENU. 
,Note
ToDo \fhis
Stop	Press	Z
PlaybackPress	d
PausePress	M
Frame-by-Frame	playback
Press	M
repeatedly	to	play	title	Frame-by-Frame.
Skipping	to	the	next/	previous	chapter/	track/	file
During	playback,	pressC	or	V	to	go	to	the	next	chapter/	track	or	to	return	to	the	beginning	of	the	current	chapter/	track.
Press 	C	twice 	briefly 	to 	step	back	to	the	previous	chapter/	track.
\bocating	a	point	quickly	by	playing	a	file	in	fast	forward	or	fast	reverse
During	playback,	pressc	or	v	repeatedly	to	select	the	required	scan	speed.
To	return	to	normal	speed,	press	PLAY.
Playing	repeatedly	or	randomly
Press	REPEAT/RANDOM repeatedly,	and	the	current	title,	chapter	or	track	will	be	played	back	repeatedly	or	randomly.	
-	Random	play	mode	:	only	music	files.
Slowing	down	the	playing	speed
In	the	pause	mode,	press	SCAN	(c or	v)	to	select	the	required	speed.	( The	reverse	playback	is	not	supported	on	Divx	files.)
HT306PD-A2_DEGYLLK_ENG_5743.indd   232011-06-22   �� 10:11:55 
						

							Ope\bati\fg24
Operating4
Othe\b Ope\batio\fs
Displayi\fg Disc I\ffo\bmatio\f 
o\f-sc\bee\f
You	can	display	various	information	about	the	disc	loaded	on-screen.
1.	 Press	DISPLAY	to	show	various	playback	information.	The	displayed	items	differ	depending	on	the	disc	type	or	playing	status.
2.	 You	can	select	an	item	by	pressing	WS	and	
change	or	select	the	setting	by	pressing	A\b.
	Title	–		 Current	title	number/	total	number	of	titles.
	Chapter	–		 Current	chapter	number/total	number	of	chapters.
	Time	–	Elapsed	playing	time.
	Audio	–		 Selected	audio	language	or	channel.
	Subtitle	–	Selected	subtitle.
	Angle	–		Selected	angle/total	number	of	angles.
	Sound	–	Selected	sound	mode.
If	any	button	is	not	pressed	for	a	few	seconds,	
the	onscreen	display	disappears. 
,Note
To display the DVD Me\fu
r
When	you	play	a	DVD	which	contains	several	menus,	you	can	select	the	menu	you	want	using	the	menu.
1.	 Press	MENU.The	disc’s	menu	appears.
2.	 Select	the	menu	by	using	WSA\b.
3.	 Press	PLAY	to	confirm.
To display the DVD Title
r
When	you	play	a	DVD	which	contains	several	titles,	you	can	select	the	title	you	want	using	the	menu.
1.	 Press	TITLE.The	disc’s	title	appears.
2.	 Select	the	menu	by	pressing	WSA\b.
3.	 Press	PLAY	to	confirm.
Selecti\fg a subtitle la\fguage
ry
During	playback,	press	SUBTITLE(	]	)	repeatedly	to	select	a	desired	subtitle	language.
1.5 times speed playback
r
The	1.5	speed	allows	you	to	watch	the	pictures	and	listen	to	the	sound	quicker	than	playing	at	a	normal	speed.
1.	 During	playback,	press	PLAY(d)	to	play	at	1.5	times	speed.	 “dX1.5”	appears	on	the	screen.
2.	 Press	PLAY(d)	again	to	exit.
HT306PD-A2_DEGYLLK_ENG_5743.indd   242011-06-22   �� 10:11:55 
						

							Ope\bati\fg25
Operating4
Sta\bti\fg play f\bom selected 
time
ry
To	start	playing	at	any	chosen	time	on	the	file	or	title.
1.	 Press	DISPLAY	during	playback.
2.	 Press	WS	to	select	the	time	clock	icon	and“--:--:--”	appears.
3.	 Input	the	required	start	time	in	hours,	minutes,	and	seconds	from	left	to	right.	If	you	enter	the	wrong	numbers,	press	CLEAR	to	remove	the	numbers	you	entered.	 Then	input	the	correct	numbers.	For	example,	to	find	a	scene	at	1	hour,	10	minutes,	and	20	seconds,	enter	 “11020”	by	using	numerical	buttons.
4.	 Press	ENTER	to	confirm.	Playback	starts	from	the	selected	time.
Last Sce\fe Memo\by
r
This	unit 	memorizes 	the 	last 	scene 	from 	the 	last 	disc	that	is	viewed.	 The	last	scene	remains	in	memory	even	if	you	remove	the	disc	from	the	player	or	switch	off	(Stand-by	mode)	the	unit.	If	you	load	a	disc	that	has	the	scene	memorized,	the	scene	is	automatically	recalled.
Cha\fgi\fg the cha\bacte\b set to 
display DivX® subtitle co\b\bectly
y
If	the	subtitle	does	not	display	properly	during	playback	press	and	hold	SUBTITLE	for	about	3	seconds	then	press	A\b	or	SUBTITLE	to	select	another	language	code	until	the	subtitle	is	displayed	properly	and	then	press	ENTER.
P\bog\bammed Playback
tu
The	program	function	enables	you	to	store	your	favourite	files	from	any	disc	or	USB	device.
A	program	can	contain	30	tracks/	files.
1.	 Select	the	DVD/CD	or	USB	function	by	pressing	FUNCTION.
2.	 To	add	a	music(s)	on	the	program	list,	press	PROG./MEMO.	to	enter	the	program	edit	mode	({ mark	appears	on	the	menu).
3.	 Select	a	desired	music	on	the	[\bist]	by	using	the		WS then	press	ENTER	to	add	the	music	to	the	program	list.
4.	 Select	music	from	the	program	list	then	press	ENTER	to	start	programmed	playback.
5.	 Press	PROG./MEMO.	to	exit	the	program	edit	mode	({ mark	disappears	on	the	menu).
E\basi\fg a file f\bom P\bog\bam List
1.	 press	PROG./MEMO.	to	enter	the	program	edit	mode	({	mark	appears	on	the	menu)
2.	 Use	WS	to	select	the	track	that	you	wish	to	erase	from	the	Program	list.
3.	 Press	CLEAR.
E\basi\fg the Complete P\bog\bam List
Use	WSA\b	to 	select 	[Clear 	All] 	then 	press 	ENTER.
The	programs	are	also	cleared	when	the	disc	
or	USB	device	is	removed,	the	unit	is	switched	
to	power	off	or	the	function	is	switched	to	
others. 
,Note
HT306PD-A2_DEGYLLK_ENG_5743.indd   252011-06-22   �� 10:11:55 
						

							Ope\bati\fg26
Operating4
Viewi\fg a PHOTO file
i
This	unit	can	play	discs	with	photo	files.
1.	 Select	the	DVD/CD	or	USB	function	by	pressing	FUNCTION.
2.	 Press	WS	to	select	a	folder,	and	then	press	ENTER.	A	list 	of 	files 	in 	the 	folder 	appears.	If 	you 	are 	in 	a 	file 	list 	and 	want 	to 	return 	to 	the 	
previous 	folder 	list, 	use 	the 	WS buttons 	on 	the 	
remote 	to 	highlight 		and 	press 	ENTER.
3.	 If	you 	want 	to 	view 	a 	particular 	file, 	press 	WS to	highlight 	a 	file 	and 	press 	ENTER	or 	PLAY.	While 	viewing 	a 	file, 	you 	can 	press 	STOP	to 	move 	to	the 	previous 	menu 	(JPEG 	menu).
Viewi\fg photo files as a slide 
show
i
1.	 Use	WSA\b to	highlight	()	icon	then	
press	ENTER	to	start	slide	Show.
2.		 You	can	change	slide	show	speed	using		
A\b	when	()	icon	is	highlighted.
Abou\f help menu for sli\be show
MenuBu\f\fonsOpera\fion
w/s
/W/SRotating	the	picture
a/d
Prev./ Nex\fA/\bMoving	to	another	file
xCloseRETURNClosing	the	slide	show
bHi\beENTER\fiding	the	help	menu
Liste\fi\fg to music du\bi\fg slide 
show
i
You	can	listen	to	music	during	slide	show,	if	the	disc	contain	music	and	photo	files	together.	Use	
WSA\b to	highlight	(~)	icon	then	press	
ENTER	to	start	slide	show.	
This	function	is	available	only	in	disc. 
,Note
Sleep Time\b Setti\fg
Press	SLEEP	one	or	more	times	to	select	delay	time	between	10	and	180	minutes,	after	the	unit	will	turn	off.
To	check	the	remaining	time,	press	SLEEP.
To	cancel	the	sleep	function,	press	SLEEP	repeatedly	until	 “S\bEEP	10”	appears,	and	then	press	SLEEP	once	again	while	 “S\bEEP	10”	is	displayed.
You	can	check	the	remaining	time	before	the	
unit	turns	off. 
,Note
Dimme\b
Press	SLEEP	once.	 The	display	window	will	be	darken	by	half.	 To	cancel	it,	press	SLEEP	repeatedly	until	dimmer	gets	off.
HT306PD-A2_DEGYLLK_ENG_5743.indd   262011-06-22   �� 10:11:56 
						

							Ope\bati\fg27
Operating4
Tu\b\f off the sou\fd tempo\ba\bily
Press	MUTE	to	mute	your	unit.
You	can	mute	your	unit,	for	example,	to	answer	the	telephone,	the	“MUTE”	displayed		in	the	display	window.
Sc\bee\f Save\b
The	screen	saver	appears	when	you	leave	the	unit	in	stop	mode	for	about	five	minutes.
System Select - Optio\fal
You	must	select	the	appropriate	system	mode	for	your	TV	system.	If		 “NO	DISC”	appears	in	the	display	window,	press	and	hold	PAUSE/STEP	(M)	for	more	than	five	seconds	to	select	a	system.	
VOCAL FADER
You	can	enjoy	the	function	as	karaoke,	by	reducing	singer	vocal	of	music	in	the	various	source.	(MP3/	WMA/	CD/	etc.)	Press	the	VOCAL FADER,	and	“FADE	ON” 	will	appear	in	display	window.
To	cancel	it,	press	VOCAL FADER	again.
	-	The	quality 	of 	the 	VOCA\b 	FADER 	may 	be 	different	depending	on	the	recording	conditions	of	music	files.
Displayi\fg file i\ffo\bmatio\f  
(ID3 TAG )
While	playing	an	MP3	file	containing	file	information,	you	can	display	the	information	by	pressing	DISPLAY.
Radio Ope\batio\fs
Be	sure	that	both	FM/AM	aerials	are	connected.	(Refer	to	the	page	17)
Liste\fi\fg to the Radio
1.	 Press	FUNCTION	until	FM/AM	appears	in	the	display	window.	The	last	received	station	is	tuned	in.
2.	 Press	and	hold	TUN.(-/+)	for	about	two	seconds	until	the	frequency	indication	starts	to	change,	then	release.	Scanning	stops	when	the	unit	tunes	in	a	station.
or
	 Press	TUN.(-/+)	repeatedly.
3.	 Adjust	the	volume	by	rotating	VOL.	on	the	front	panel	or	by	pressing	VOL +	or	-	on	the	remote	control	repeatedly.	
HT306PD-A2_DEGYLLK_ENG_5743.indd   272011-06-22   �� 10:11:56 
						

							Ope\bati\fg28
Operating4
P\besetti\fg the Radio Statio\fs
You	can	preset	50	stations	for	FM/AM.
Before	tuning,	make	sure	that	you	have	turned	down	the	volume.
1.	 Press	FUNCTION	until	FM/AM	appears	in	the	display	window.
2.	 Select	the	desired	frequency	by	using	TUN.(-/+).
3.	 Press	PROG./MEMO.	a	preset	number	will	flash	in	the	display	window.
4.	 Press	PRESET (WS)	to	select	the	preset	number	you	want.
5.	 Press	PROG./MEMO..The	station	is	stored.
6.	 Repeat	the	steps	2	to	5	to	store	other	stations.
Deleti\fg all the saved statio\fs
1.	 Press	and	hold	PROG./MEMO.	for	two	seconds.	“ERASE	A\b\b”	will	flash	up	on	the	unit	display.	
2.	 Press	PROG./MEMO.	to	erase	all	of	the	saved	radio	stations.
Imp\bovi\fg poo\b FM \beceptio\f
Press	PLAY	(d)	(MO./ST.)	on	the	remote	control.	This	will	change	the	tuner	from	stereo	to	mono	and	usually	improve	the	reception.
HT306PD-A2_DEGYLLK_ENG_5743.indd   282011-06-22   �� 10:11:56 
						

							Ope\bati\fg29
Operating4
Sou\fd adjustme\ft 
Setti\fg the su\b\bou\fd mode
This	system	has	a	number	of	pre-set	surround	sound	fields.	You	can	select	a	desired	sound	mode	by	using	EQ/ LG EQ.	You	can	change	the	EQ/ LG EQ	using	A\b	arrow	key	while	the	EQ/ LG EQ	information	is	displayed	on.
The	displayed	items	for	the	Equalizer	may	be	different	depending	on	sound	sources	and	effects.
On DisplayDescrip\fion
NAT	P\bUSYou	can	enjoy	the	natural	sound	effect	same	as	a	5.1-channel.
NATURA\bYou	can	enjoy	comfortable	and	natural	sound.
\bocal
Specialization
equalizer
Regionally	optimized
sound	effect.	(DANGDUT/
ARABIC/	PERSIAN/	INDIA/
REGUETON/	MERENGUE/
SA\bSA/	SAMBA/	CUMBIA/
AFRO)
AUTO	EQ
Realizes	the	sound	equalizer	that	is	the	most	similar	to	the	genre	of	which	is	included	in	the	MP3	ID3	tag	of	song	files.
POP
C\bASSIC
JAZZ
ROCK
This	program	lends	an	enthusiastic	atmosphere	to	the	sound,	giving	you	the	feeling	you	are	at	an	actual	rock	pop,	jazz	or	classic	concert.
MP3	OPTThis	function	is	optimized	for	compressible	MP3	file.	It	improves	the	treble	sound.
BASS
During	playback,	Reinforces	the	treble,	bass	and	surround	sound	effect.
VIRTUA\bYou	can	enjoy	more	virtual	surround	sound.
NORMA\bYou	can	enjoy	the	sound	without	equalizer	effect.
	
y 	In	some	of	surround	modes,	on	some	
speakers,	there’s	no	sound	or	low	sound.	it,	
depends	on	the	mode	of	surround	and	the	
source	of	audio,	it	is	not	defective.
	
y You	may	need	to	reset	the	surround	mode,	
after	switching	the	input,	sometimes	even	
after	the	sound	track	changed. 
,Note
HT306PD-A2_DEGYLLK_ENG_5743.indd   292011-06-22   �� 10:11:56 
						

							5	 Troubleshooting
3\f
Operating4
Ope\bati\fg
Adva\fced Ope\batio\fs
Liste\fi\fg to music f\bom you\b 
po\btable playe\b o\b exte\b\fal 
device.
The	unit	can	be	used	to	play	the	music	from	many	types	of	portable	player	or	external	devices.	
1.	 Connect	the	portable	player	to	the		PORT.	IN(PORTAB\bE	IN)	connector	of	the	unit.
Or
	 Connect	the	external	device	to	the	AUX	(\b/	R)	INPUT	connector	of	the	unit.
2.	 Turn	the	power	on	by	pressing	POWER.
3.	 Select	the	PORTAB\bE	or	AUX	function	by	pressing	FUNCTION.
4.	 Turn	the	portable	player	or	external	device	and	start	it	playing.
Reco\bdi\fg to USB
1.	 Connect	the	USB	device	to	the	unit.
2.	 Select	a	DVD/	CD	function	by	pressing	FUNCTION.
One	track	recording	-	You	can	record	to	USB	after	playing	the	file	you	want.
All	tracks	recording	-	You	can	record	to	USB	after	stop.
Program	list	recording		-	After	showing	the	programmed	list,	you	can	record	it	to	USB.
3.	 Start	the	recording	by	pressing	X	REC.
4.	 To	stop	recording,	press	Z	STOP.
	
y You	can	check	the	recording	percentage	
rate	for	the	USB	record	on	the	display	
window	during	the	recording.	(AUDIO,	
MP3/	
WMA	CD	Only)
	
y During	recording	MP3/	
WMA,	there	is	no	
sound.
	
y When	you	stop	recording	during	playback,	
the	file	that	has	been	recorded	at	that	time	
will	be	stored.	(AUDIO	CD	Only)
	
y Do	not	remove	the	USB	device	or	turn	
off	the	unit	during	USB	recording.	If	not,	
an	incomplete	file	may	be	made	and	not	
deleted	on	PC.
	
y If	USB	recording	does	not	work,	the	
message	like	
“NO	USB”,	“ERROR”,	“USB	FU\b\b” 	
or	 “NO	REC” 	is	displayed	on	the	display	
window.
	
y Multi	card	reader	device	or	External	\fDD	
can	not	be	used	for	USB	recording.
	
y A	file	is	recorded	by	128Mbyte	when	you	
record	for	a	long	term.
	
y When	you	stop	recording	during	playback,	
the	file	will	not	be	stored.
	
y You	may	not	store	more	than	999	files.
	
y The	numbering	of	the	recording	file	is	
entered	from	the	lowest	number.		
So	if	you	delete	some	of	the	recording	files,	
the	next	recording	file	could	be	the	lowest	
number	among	them.
	
y It’ll	be	stored	as	follows.
AUDIO	CD
MP3/	WMA The	other	
source
	
 
,Note
The	making	of	unauthorized	copies	of	copy-protected	material,	including	computer	programs,	files,	broadcasts	and	sound	recordings,	may	be	an	infringement	of	copyrights	and	constitute	a	criminal	offense.	 This	equipment	should	not	be	used	for	such	purposes.
Be responsible 
Respec\f copyrigh\fs
HT306PD-A2_DEGYLLK_ENG_5743.indd   302011-06-22   �� 10:11:56