LG Ht 462dz Owners Manual

							11
Installation and Setup
Displaying Disc Information 
On - screen
You can display various information about the disc
loaded on-screen. 
1. Press DISPLAY to show various playback
information.
The displayed items differ depending on the disc
type or playing status. 
2. You can select an item by pressing v/ Vand
change or select the setting by pressing b/ B.

Title (Track) – Current title (or track) number/ 
total number of titles (or tracks).
 Chapter – Current chapter number/total number
of chapters. 
 Time – Elapsed playing time. 
Audio – Selected audio language or channel. 
Subtitle – Selected subtitle. 
Angle – Selected angle/total number of angles. 
Sound – Selected sound mode. 
Note:
If any button is not pressed for a few seconds, the on-
screen display disappears.
Initial Settings
By using the Setup menu, you can make various
adjustments to items such as picture and sound. You
can also set a language for the subtitles and the
Setup menu, among other things. For details on each
Setup menu item, see  the pages 11 to 13.
To display and exit the Menu:
Press SETUP to display the menu. A second press of
SETUP will take you back to initial screen.
To go to the next level: 
Press Bon the remote control. 
To go back to the previous level:
Press bon the remote control. 
GENERAL OPERATION
1. Press SETUP. The Setup menu appears.
2. Use v/Vto select the desired option then press
Bto move to the second level. The screen shows
the current setting for the selected item, as well as
alternate setting(s).
3. Use v/Vto select the second desired option and
then press Bto move to the third level.
4.
Use v/Vto select the desired setting then press
ENTER to confirm your selection. Some items
require additional steps.
5. Press SETUP or PLAY to exit the Setup menu.
LANGUAGE
OSD
Select a language for the Setup menu and then on-
screen display.
Disc Audio / Subtitle / Menu
Select the language you prefer for the audio track
(disc audio), subtitles, and the disc menu.
Original – Refers to the original language in which
the disc was recorded.
Other – To select another language, press
numeric buttons and then ENTER to enter the
corresponding 4-digit number according to the
language code list on the page 23. If you enter the
wrong language code, press CLEAR.
OSD
Original English
Off
Original Disc Audio
Disc Subtitle   
Disc Menu
MoveSelect         
LANGUAGE
 
						

							12
DISPLAY
TV Aspect 
4:3 – Select when a standard 4:3 TV is connected.
16:9 – Select when a 16:9 wide TV is connected.
Display Mode
The display Mode setting works only when the TV
Aspect mode is set to “4:3”.
Letterbox – Displays a wide picture with bands on
the upper and lower portions of the screen.
Panscan – Automatically displays the wide picture
on the entire screen and cuts off the portions that
do not fit.
AUDIO
Each DVD disc has a variety of audio output options.
Set the receiver’s AUDIO options according to the
type of audio system you use. 
Dynamic Range Control (DRC)
With the DVD*
1format, you can hear a program’s
soundtrack in the most accurate and realistic
presentation, thanks to digital audio technology.
However, you may wish to compress the dynamic
range of the audio output (the difference between the
loudest sounds and the quietest ones). Then, you may
listen to a movie at a lower volume without losing
clarity of sound. Set DRC to On for this effect.
*1: Dolby Digital only
Vocal
Set Vocal to On only when a multi-channel karaoke
DVD is playing. The karaoke channels on the disc will
mix into normal stereo sound.
HD AV Sync 
When using Digital TV. 
Sometimes AV signal could not be transmitted
simultaneously because of later transmission of video
signal compared to audio signal. 
Because it takes some time to convert analog video
signal to digital one in the Digital TV. 
And It means that you may not enjoy picture on the
screen and sound from speaker at the same time
even though it is one scene.
In the HD AV Sync menu, you could adjust delay time
to audio signal for simultaneous AV signal
transmission
 Delay time could be set up with 10msec unit. 
(0 ~ 300ms)
 Delay time is different according to each TV Brand.
So you need to adjust optimal delay time complying
with your TV.
DISPLAY  TV Aspect
Display Mode
MoveSelect         
Progressive ScanOffWidescreen 16  :  9
On DRC
On Vo c a l
MoveSelect         
AUDIO
0 ms HD AV Sync
 
						

							13
Installation and Setup
LOCK (Parental Control)
Rating
Blocks playback of rated DVDs based on their
contents. Not all discs are rated.
1. Select “Rating” on the LOCK menu then 
press B.
2. To access the LOCK options, you must input the
password you have created. If you have not yet
entered password, you are prompted to do so.
Input a password and press ENTER. Enter it again
and press ENTER to verify. If you make a mistake
before pressing ENTER, press CLEAR.
3. Select a rating from 1 to 8 using the v/Vbuttons. 
Rating 1-8: Rating one (1) has the most
restrictions and rating eight (8) is the least
restrictive.
Unlock: If you select unlock, parental control is
not active and the disc plays in full.
4. Press ENTER to confirm your rating selection, then
press SETUP to exit the menu.
Password
You can enter or change password.
1. Select Password on the LOCK menu and then
press B. 
2. Follow the step 2 as shown above (Rating).
To change the password, press ENTER when the
“Change” option is highlighted. Input a password
and press ENTER. Enter it again and press
ENTER to verify.
3. Press SETUP to exit the menu.
If you forget your password
If you forget your password, you can clear it using the
following steps:
1. Press SETUP to display the Setup menu.
2. Input the 6-digit number “210499” and press 
ENTER. The password is cleared. Area Code 
Enter the code of the area whose standards were
used to rate the DVD video disc, based on the list on
page 23.
1. Select “Area Code” on the LOCK menu then 
press B.
2. Follow the step 2 as shown previous paragraph
(Rating).
3. Select the first character using v/Vbuttons.
4. Press Band select the second character using 
v/Vbuttons.
5. Press ENTER to confirm your Area code selection.
OTHERS
DivX(R) Registration
We provide you the DivX®VOD (Video On Demand)
registration code that allows you to rent and purchase
videos based on the DivX
®VOD service. For more
information, visit www.divx.com/vod.
1. Select “DivX(R) Registration” option and then
press B.
2. Press ENTER while “Select” is selected and the
registration code will appear. 
Use the registration code to purchase or rent the
videos from DivX
®VOD service at
www.divx.com/vod. Follow the instructions and
download the video onto a disc for playback on
this unit.
3. Press ENTER to exit.
Note:
All the downloaded videos from DivX
®VOD can only
be played back on this unit.
LOCK
Rating
****
Unlock
Password   
Area Code US
MoveSelect         
PBC
Move
OTHERS
On
Select         
Select DivX(R) RegistrationSemi KaraokeOn
C
Select DivX(R) Registration
Semi KaraokeOn
ES
 
						

							14
Operation
General features
Buttons Operations
Z (OPEN / CLOSE)  Opens or closes the disc tray.
X (PAUSE) During playback, press Xto pause playback.
Press Xrepeatedly to play Frame-by-Frame. 
SKIP (./ >) During playback, press SKIP (.or >) to go to the next
chapter/track or to return to the beginning of the current
chapter/track.
Press SKIP.twice briefly to step back to the previous
chapter/track.
SCAN (m/ M) During playback, press SCAN (mor M) repeatedly to
select the required scan speed. 
DVD :bb, bbb, bbbb, bbbbb, bbbbbb 
or BB, BBB, BBBB, BBBBB, BBBBBB
DivX disc : bb, bbb, bbbb, bbbbb or BB, BBB, BBBB, BBBBB
WMA/MP3, Audio CD : m (X2, X4,  X8) or M (X2, X4, X8)
REPEAT During playback, press REPEAT repeatedly to select a
desired repeat mode.
DVD Video discs: Chapter/Title/Off
Audio CD, DivX/MP3/WMA discs: Track/All/Off
REPEAT A-B During playback, press REPEAT A-B to select a point A and
a point B and repeats a sequence from point A (Starting
point) to point B (End point). 
Press REPEAT A-B to exit.
ZOOM During playback or in the pause mode, press ZOOM to
enlarge the video image (3 steps).
You can move through the zoomed picture using bBvV
buttons.
TITLE If the current DVD title has a menu, the title menu appears
on the screen. Otherwise, the disc menu may appears.
MENU The disc menu appears on the screen.
(SUBTITLE) During playback, press S-TITLE repeatedly to select a
desired subtitle language.
(AUDIO language) During playback, press AUDIO repeatedly to hear a different
audio language or audio track.
SLOWIn the pause mode, press SCAN (mor M) to select the
required speed.
DVD : t (1/2, 1/4, 1/8, 1/16) or T (1/2, 1/4, 1/8, 1/16)
Discs
DVD
DivXDVD
DivXDVD
DVD
DVD
DVD
DVD
ALL
WMAMP3ACD
DivXDVD
ALL
DivXDVD
ALL
ALL
 
						

							15
Operation
Notes on general features:
 Zoom may not work on some DVDs.

The A-B repeat function is available only in the
current title.
Additional features
1.5 times speed playback 
You can play at 1.5 times speed.
The 1.5 speed allows you to watch the pictures and
listen to the sound quicker than playing at a normal
speed on the disc.
1. During playback, press PLAY(B) to play at 1.5
times speed. “BX1.5” appears on the screen.
2. Press PLAY(B) again to exit.
Time Search 
To start playing at any chosen time on the disc:
1. Press DISPLAY during playback. 
2. Press v/Vto select the time clock icon and 
“--:--:--” appears.
3. Input the required start time in hours, minutes, and
seconds from left to right. If you enter the wrong
numbers, press CLEAR to remove the numbers
you entered. Then input the correct numbers.
4. Press ENTER to confirm. Playback starts from the
selected time.
Marker Search 
To enter a Marker
You can start playback from up to nine memorized
points. To enter a marker, press MARKER at the
desired point on the disc. The Marker icon appears on
the TV screen briefly. Repeat to enter up to nine
markers.
To Recall or Clear a Marked Scene
1. During disc playback, press SEARCH. The marker
search menu appears on the screen.
2. Within 10 seconds, pressb/ Bto select a marker
number that you want to recall or clear.
3. Press ENTER and playback starts from the
marked scene. Or press CLEAR and the marker
number is erased from the list.
4. You can play any marker by inputting its number
on the marker search menu.Screen Saver
The screen saver appears when you leave the unit in
Stop mode for about five minutes. 
Last Scene Memory 
This receiver memorizes the last scene from the last
disc that is viewed. The last scene remains in the
memory even if you remove the disc from the receiver
or switch off the receiver. If you load a disc that has
the scene memorized, the scene is automatically
recalled.
Note:
This receiver does not memorize the scene of a disc if you
switch off the receiver before commencing to play the disc.
System Select
You must select the an appropriate system mode for
your TV system. If NO DISC appears in the display
window, press and hold Xon the front panel or
PAUSE/STEP (X) remote control for more than 5
seconds to be able to select a system (PAL, NTSC).
 When the selected system is not compatible with
the system of your TV, normal colour picture may
not be displayed.
NTSC:Select when DVD/CD Receiver is connected 
with NTSC-TV.
PAL:Select when DVD/CD Receiver is connected 
with PAL-TV.
Controlling the TV
Your remote control is capable of operating your
DVD/CD Receiver as well as limited functions of LG
TV. 
Follow the instructions below to operate your LG TV.
Setting Remote Control Codes for LG TV
1. Hold POWER (TV)and press PR (-/+) button
repeatedly until the TV on or off.
2. ThePOWER (TV), PR (-/+), VOL (-/+), andINPUT
buttons on remote control are used to operate the
LG TV.
Note:
If the remote control does not operate your particular TV, try
the other code or use the remote control originally supplied
with the LG TV. (LG and Gold Star)
Due to the variety of codes used by manufacturers, OUR
COMPANY cannot guarantee that the remote control will
operate every LG TV model.
DVD
DivXDVD
DivXDVD
WMAMP3ACDDVD
 
						

							16
Playing an Audio CD or
MP3/WMA file
This unit can play Audio CDs or MP3/WMA files.
MP3/ WMA/ Audio CDOnce you insert an MP3/WMA files recording media or
Audio CD  a menu appears on the TV screen. 
Press v/ Vto select a track/file and then press PLAY
or ENTER, and playback starts. You can use variable
playback functions. Refer to the page 14.
ID3 TAG
When playing a file containing information such as
track titles, you can see the information by pressing
DISPLAY.  (Song, Artist, Album,  Genre,  Comment)
Tips:
 Press MENU to move to the next page.
On a CD with MP3/WMA and JPEG, you can
switch MP3/WMA and JPEG. Press TITLE, and
MUSIC or PHOTO word on top of the menu is
highlighted.
Programmed Playback 
The program function enables you to store your
favorite tracks from any disc in the receiver memory. A
program can contain 300 tracks.
1. Insert a disc.
Audio CD and MP3/WMA Discs: 
2. Select a track on the “List” and then press PROG.
or select “ (Add)” icon and then press ENTER
to place the selected track on the “Program” list.
Repeat to place additional tracks on the list.
Note:
You can add all tracks in the disc. Select “
(Add All)”  icon
then press ENTER.
3. Select the track you want to start playing on the
“Program” list. Press MENU to move to the next
page.
4. Press PLAY or ENTER to start. Playback begins in
the order in which you programmed the tracks.
Playback stops after all of the tracks on the
“Program” list have played once.
5. To resume normal playback from programmed
playback, select a track of AUDIO CD (or
MP3/WMA) list and then press PLAY.
Repeat Programmed Tracks 
1. Press REPEAT when playing a disc. The repeat
icon appears.
2. Press REPEAT to select a desired repeat mode.
• TRACK: repeats the current track
• ALL: repeats all the tracks on programmed list.
• Off (No display): does not play repeatedly.
Erasing a Track from “Program” List 
1. Use vVto select the track that you wish to erase
from the Program list.
2. Press CLEAR. Alternatively, select “ (Delete)”
icon then press ENTER to place the selected track
on the Program list. Repeat to erase additional
tracks on the list.
Erasing the Complete Program List 
Use v/Vto select “ (Del all)” and then press
ENTER.
Note:
The programs are also cleared when the disc is removed.
MP3 / WMA disc compatibility with this player is limited
as follows:
• Sampling frequency: within 32 - 48 kHz (MP3), 
within 24 - 48kHz (WMA)
• Bit rate: within 32 - 320kbps (MP3), 40 - 192kbps (WMA)
• The DVD/CD Receiver cannot read an MP3/WMA file
that has a file extension other than “.mp3” / “.wma”.
• CD-R physical format should be ISO 9660
• If you record MP3 / WMA files using software that cannot
create a file system (eg. Direct-CD) it is impossible to
playback MP3 / WMA files.We recommend that you use
Easy-CD Creator, which creates an ISO 9660 file
system.
• File names should have a maximum of 8 letters and
must incorporate an .mp3 or .wma extension. 
• They should not contain special letters such as  / ? * : “
< > l etc.
• The total number of files on the disc should be less than
999.
This DVD/CD Receiver requires discs and recordings to
meet certain technical standards in order to achieve
optimal playback quality. Pre-recorded DVDs are
automatically set to these standards. There are many
different types of recordable disc formats (including CD-R
containing MP3 or WMA files) and these require certain
pre-existing conditions (see above) to ensure compatible
playback.
Customers should note that permission is required in
order to download MP3 / WMA files and music from the
Internet. Our company has no right to grant such
permission. Permission should always be sought from
the copyright owner.
 
						

							17
Operation
Viewing a JPEG file 
This unit can play discs with JPEG files.
Before playing JPEG recordings, read the notes on
JPEG Recordings on the right.
1. Insert a disc and close the tray.
The PHOTO menu appears on the TV screen.
2. Press v/Vto select a folder, and then press
ENTER. A list of files in the folder appears. 
If you are in a file list and want to return to the 
previous Folder list, use the v/Vbuttons on the
remote to highlight  and press ENTER.
3. If you want to view a particular file, press v/Vto
highlight a file and press ENTER or PLAY. While
viewing a file, you can press STOP to move to the
previous menu (JPEG menu).
Tips:
 There are four Slide Speed options  : 
> (Slow), >> (Normal), >>> (Fast) and II (off).
Use v/V/b/Bto highlight the Speed. Then, use b/B
to select the option you want to use and then press
ENTER. 
 If you set Speed option to Off, the slide is not active.
Slide Show
Use vVbBto highlight the  (Slide Show) then
press ENTER.
Still Picture 
1. Press PAUSE/STEP during the slide show. 
The DVD/CD Receiver will now go into the PAUSE
mode. 
2. To return to the slide show, press PLAY or press
PAUSE/STEP again.
Moving to another File
Press SKIP (.or >) once during viewing a
picture to advance to the next or previous file.
Rotating the picture 
Press vVbBduring showing a picture to rotate the
picture clockwise or counter-clockwise.
JPEGJPEG disc compatibility with this player is
limited as follows:
• Depending upon the size and the number of
JPEG files, it could take a long time for the
DVD/CD Receiver to read the disc’s contents. If
you don’t see an on-screen display after several
minutes, some of the files may be too large —
reduce the resolution of the JPEG files to less
than 2M pixels as 2760 x 2048 pixels and burn
another disc.
• The total number of files and folders on the disc
should be less than 999.
• Some discs may not operate due to a different
recording format or the condition of disc.
• Ensure that all the selected files have the “.jpg”
extensions when copying into the CD layout.
• If the files have “.jpe” or “.jpeg” extensions,
please rename them as “.jpg” file.
• File names without “.jpg” extension will not be
able to be read by this DVD/CD Receiver. Even
though the files are shown as JPEG image files in
Windows Explorer.
PreviewListJPEG Folder 1JPEG Folder 2JPEG Folder 3JPEG Folder 4JPEG Folder 5JPEG Folder 6JPEG Folder 7JPEG Folder 8
PHOTO
 
						

							18
Playing a DivX Moviefile 
Using this DVD/CD Receiver you can play DivX disc.  
1. Insert a disc and close the tray. The MOVIE menu
appears on the TV screen.
2. Press v/Vto select a  folder and then press
ENTER. A list of files in the folder appears. If you
are in a file list and want to return to the Folder
list, use the v/Vbuttons on the remote to
highlight  and press ENTER.
3. If you want to view a particular file, press 
v/Vto highlight a file and press ENTER or PLAY. 
4. Press STOP to exit.
Notice for displaying the Divx subtitleIf the subtitle does not display properly during playback,
press and hold S-TITLE for about 3 seconds then press
S-TITLE to select another language code until the
subtitle is displayed properly
Tips:
 
Press MENU to move to the next page.
 
On a CD with MP3/WMA, JPEG and MOVIE file,
you can switch MUSIC, PHOTO and MOVIE menu.
Press TITLE, and MUSIC, PHOTO and MOVIE
word on top of the menu is highlighted.
Notes:
 
Be sure to select “SUBTITLE ON” mode by
pressing the subtitle file every time before playing a
DivX file .
 
When the subtile has more than two languages in
the file, original subtile is only available.
 
You can not adjust sound mode and VIRTUAL
sound during the DivX file playing.
ListMovie Folder 1Movie Folder 2Movie Folder 3Movie Folder 4Movie Folder 5Movie Folder 6Movie Folder 7Movie Folder 8
MOVIE0:00:00
DivX disc compatibility with this player is limited
as follows:
•Available resolution size of the DivX file is under
800x600 (W x H) pixel.
•The file name of the DivX subtitle is available by
45 characters. 
•If there is impossible code to express in the DivX
file, it may be displayed as   _  mark on the
display. 
• If the number of the screen frame is over 30
per 1 second, this unit may not operate
normally.
• If the video and audio structure of recorded
files are not interleaved, either video or audio
is outputted. 
Playable DivX file
•.avi , .mpg , .mpeg , .divx
Playable Subtitle format
•SubRip(*.srt/*.txt)
SAMI(*.smi)
SubStation Alpha(*.ssa/*.txt)
MicroDVD(*.sub/*.txt)
SubViewer 2.0(*.sub/*.txt)
VobSub(*.sub)
Playable Codec format
•DIVX3.xx , DIVX4.xx , DIVX5.xx , 
MP43 , 3IVX .
Playable Audio format
AC3 , DTS , PCM , MP3 , WMA .
• Sampling frequency: within 32 - 48 kHz (MP3),
within 24 - 48kHz (WMA)
• Bit rate: within 32 - 320kbps (MP3), 
40 - 192kbps (WMA)
 
						

							19
Operation
Presetting the Radio Stations
You can preset 50 stations for FM and AM (MW).
Before tuning, make sure that you have turned down
the volume.
1. Press TUNER on the remote control until FM or
AM (MW) appears in the display window.
2. And then every time you press TUNER, FM and
AM (MW) changes alternately.
3. Press and hold TUN.(-/+) for about two seconds
until the frequency indication starts to change,
then release.
Scanning stops when the DVD/CD Receiver tunes in a 
station.
4. Press PROG./MEMO. on the remote control.A preset number will flash in the display window.
5. Press PRESET (-/+) on the remote control to
select the preset number you want.
6. Press PROG./MEMO. on the remote control again.
The station is stored. 
7. Repeat steps 3 to 6 to store other stations.
To tune in a station with a weak signal Press TUN.(-/+) repeatedly in step 3 to tune in the
station manually.
To clear all the stored stations Press and hold PROG./MEMO. for about two seconds
and “ERASE ALL” is appeared in the display window
and then press PROG./MEMO. again, the stations are
cleared.
 If you have accidentally entered into the ERASE
ALL mode and you do not wish to clear the
memory, do not press any key. After a few seconds,
ERASE ALL will go off by itself and change to
normal mode.
Note:
If all stations have already been entered, the FULL
message will appear in the display window for a
moment and then a preset number will flash. 
To change the preset number, follow the steps 5-6 as
above.
Listening to the Radio
Preset radio stations in the DVD/CD Receiver’s
memory first (see “Presetting radio stations” on the
left).
1. Press TUNER until FM or AM (MW) appears in the
display window.
The last received station is tuned in.
2. Press PRESET (-/+) repeatedly on the remote
control to select the preset station you want.
Each time you press the button, the DVD/CD Receiver
tunes in one preset station at a time.
3. Adjust the volume by rotating VOLUME on the
front panel or by pressing VOLUME + or - on the
remote control repeatedly.
To turn off the radio Press POWER to turn the DVD/CD Receiver off or
select another function mode (DVD/CD, AUX, USB).
To listen to non-preset radio stations 
Use manual or automatic tuning in the step 2.

For manual tuning, press TUN.(-/+) repeatedly.

For automatic tuning, press and hold TUN.(-/+) for
about two seconds on the front panel.
To select a preset radio station directlyYou can use the number buttons on the remote
control to select a preset radio station directly.
For example, to listen to the preset station 4, press 4
on the remote control. To listen to the preset station
19, press 1 and then 9 (within 3 seconds). 
For your reference
 If an FM program is noisy
Press MONO/ST. on the front panel to make
“STEREO” disappear in the display window. There
will be no stereo effect, but the reception will
improve. Press the button again to restore the
stereo effect.
 To improve reception
Reorient the supplied antennas.
 
						

							20
RDS Operation
This unit is equipped with RDS (Radio Data System),
which brings a wide range of information to FM radio.
RDS, now being used in many countries, is a system
for transmitting station call signs or network
information, a description of station programme type
text message about the station or specifics of musical
selection and the correct time. 
RDS TUNING
When a FM station is tuned in and it contains RDS
data, the unit will automatically display the station’s
call sign and the RDS indicator will light in the Display
Window as well as indicators for the RDS services
programme (PS), programme type recognition (PTY),
Radio text (RT) and Clock Time (CT) if transmitted by
the station.
RDS DISPLAY OPTIONS
The RDS system is capable of transmitting a wide
variety of information in addition to the initial call sign
that appears when a station is first tuned. In normal
RDS operation the display will indicate the station
name, broadcast network or call letters. Pressing RDS
on the remote control enables you to cycle through
the various data types in the sequence:
(PS ↔ ↔
FREQUENCY↔ ↔
PTY↔ ↔
RT ↔ ↔
CT)
 PS (Programme Service  name)-The name of the
channel is shown in the Display Window.
 PTY (Programme type recognition)-The name of
the programme type is shown in the Display
Window.
 RT (Radiotext)-A “text” message contains special
information from the broadcast station. Note that
this message may scroll across the display to
permit message.
 CT (Time controlled by the channel)-Enables
the unit to receive the actual time and show it in
the Display Window.
Note:
Some RDS stations may not choose to include some
of these additional features. If the data required for
the selected mode is not being transmitted, the
Display Window will show a PTY NONE, RT NONE,
CT NONE, or PS NONE message.
NEWS News
AFFAIRS Current Affairs
INFO Information
SPORT Sports
EDUCATE Educational
DRAMA Drama
CULTURE Culture
SCIENCE Science
VARIED Varied Speech Programme
POP M Popular Music
ROCK M Rock Music
EASY M Easy Listening Music
LIGHT M Light Music
CLASSICS Classical Music
OTHER M Other Music
WEATHER Weather Information
FINANCE Financial Programmes
CHILDREN Children’s Programmes
SOCIAL Social Affairs  Programmes
RELIGION Religious Broadcasts
PHONE IN Phone-In Programmes
TRAVEL Travel and Touring
LEISURE Leisure and Hobby
JAZZ Jazz Music
COUNTRY Country Music 
NATION M National Music
OLDIES Oldies Music
FOLK M Folk Music
DOCUMENT Documentary Programmes
TEST Station Alarm Test  Message
ALARM ! Emergency Broadcast Information   
Programme Search (PTY)
A major benefit of RDS is its ability to encode
broadcasts with Programme Type (PTY) codes that
indicate the type of material being broadcast. The
following list shows the abbreviations used to
indicate each PTY along with an explanation of the
PTY.
You may search for a specific Programme Type (PTY)
by following these steps:
1. Press TUNER to select the FM mode.
2. Press PTY on the remote control, the display will
show the last PTY in use.
3. Press PTY repeatedly to select a desired PTY.
4. When the PTY is selected, press TUN.(-/+).
The
unit will go into an automatic search mode. When a
station is tuned, the search will stop.