LG Hs33s Owners Manual

Model: HS33S (HS33S-A2P, SH33S-F/A)
Unique Features
P/NO : MFL56962858
USB Direct Recording 
Record music from CD to
your USB device.
Go to page 16
Home Theater
Speaker ez Set-up
Listen sound from TV and
Digital Device with 2.1ch
mode.
Go to page 14
Full HD up-scaling
(1080p)
View Full HD picture quality
with simple setup.
Go to page 9
Portable In
Listen to music from your
portable device (MP3,
Notebook, etc).
Go to page 16
Made for iPod
Enjoy music from iPod with
simple connection.
Go to page 17...

2
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE
COVER (OR BACK) NO USER-SERVICEABLE PARTS INSIDE REFER SERVICING
TO QUALIFIED SERVICE PERSONNEL.
This lightning flash with arrowhead symbol within an equilateral triangle is
intended to alert the user to the presence of uninsulated dangerous voltage
within the product’s enclosure that may be of sufficient magnitude to 
constitute a risk of electric shock to persons. 
The exclamation point within an equilateral triangle is intended to alert...

3
Contents
Main unit  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4
Remote control  . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5
Making system connections  . . . . . . . . . . . . . . . . . .6-7
Listening to the sound from your analog component  . .7
OSD Initial language settings - optional  . . . . . . . . . . .8
Initial Setting the Area Code  . . . . . . . . . . . . . . . . . . . .8
Adjust the settings  . . . . . . . . . . . . . . . . . . . . . . . .8-10
Setting the...

*Touch sensor 
This unit has sensitive controls that respond to the
touch of your fingers. 
You can also change the volume by moving your finger
around the touch wheel.
Main Unit
4
aPOWER
bDISC SLOT
cEJECT
dREMOTE SENSOR
eDISPLAY WINDOW
fTUNING DOWN & SKIP (
.)gSTOP
hTUNING UP & SKIP (
>)
iPLAY/PAUSE (
N/ X)
jMIC
kUSB PORT
lPORTABLE IN JACKmSYSTEM JACK
nCOMPONENT VIDEO OUT
JACKS
oHDMI OUT JACK
pOPTICAL IN JACK
qiPod DOCK
Precautions in using the touch buttons
• Use the touch buttons with clean and dry...

5

 
 
 
 
 
 
 
 a
 
 
 
 
 
 
 
 
INPUT :Changes the input source( AUX, AUX  OPT,
PORTABLE, USB, OSD IPOD, IPOD)SLEEP : Sets a certain period of time after which the unit
will switch to standby.
-Press SLEEP repeatedly to select the desired time period
options (in minutes): (Dimmer on 
t t 
 Sleep timer value t
t 
 Dimmer off) 
Dimmer on: The display window becomes dark and the
touch wheel turns off.
-To view the time countdown to the standby mode, press
SLEEP again.
-To deactivate the sleep timer,...

Connecting the main unit, speakers, and FM
antenna to the active subwoofer.aConnect the system jack marked MAIN to the main unit (SYSTEM).
Secure the jack by tightening the two screws.
bConnect the system jack marked SPK to the active subwoofer (SYSTEM).
Secure the jack by tightening the two screws.
cdConnect the speakers to the active subwoofer (SPEAKERS).
Connect the red end of each wire to the terminals marked+ (plus) and
black end to the terminals maked - (minus).
Active subwoofer The bottom of the...

Connecting the video out to your TV.
Check the jacks of your TV, and choose the  ,  , or  connection. 
Picture quality improves in order from  to  .
To connect to a TV with the video in jack 
Connect the video cable from the VIDEO OUT on the rear of the active 
subwoofer to the video in jack on your TV.
To connect to a TV with the component video in jacks 
If your TV has component video in, connect a component video cable from
COMPONENT VIDEO OUT (Y, P
Band PR) jacks on the rear of the main unit
to the...

Adjust the settings - more you can do
Adjust the language settings
OSD – Select a language for the Setup menu and on-screen display. 
There is displayed as “-” or other error mark on display when you
change OSD, do as follows;
- Restart the unit
- Change function
- Disconnect and connect USB device.
Disc Audio/Disc Subtitle/Disc Menu– Select a language for the
Menu/Audio/Subtitle. 
[Original]: Refers to the original language in which the disc was recorded.
[Other]: To select another language, press...

9
Adjust the display settings
TV Aspect – Select which screen aspect to use based on the shape of your TV
screen. 
[4:3]: Select when a standard 4:3 TV is connected.
[16:9]: Select when a 16:9 wide TV is connected.
Display Mode – If you selected 4:3, you’ll need to define how you would like
widescreen programs and films to be displayed on your TV screen. 
[Letterbox]: This displays a widescreen picture with black bands at the top
and bottom of the screen.
[Panscan]: This fills the entire 4:3 screen,...

Adjust the lock settings
To access the lock options, you must enter the 4-digit password. If you have not
yet entered a password you are prompted to do so. Enter a 4-digit password.
Enter it again to verify. If you make a mistake while entering number, press
CLEAR to delete numbers.
If you forget your password you can reset it. Press SETUP to display the Setup
menu. Input ‘210499’ and press ENTER. The password has now been cleared. 
Rating –Select a rating level. The lower the level, the stricter the...