LG Hs102 Projector User Manual

Function
21
1. Press the MENUbutton and then use ,button to select the         menu.
2. Press the 
,button to selectBlack levelitem.
3. Press the 
,button to select Low or High. 
This function works in the following mode : Video  You can use this function through the  button on the control panel.Press the MENUbutton twice or the RETURNbutton to exit the menu screen.
* What is the 
Black levelfunction?
When you watch the movie, this function adjusts the set to the best picture
appearance. Adjusting the...

Function
22
1. Press the MENUbutton and then use ,button to select the         menu.
2. Press the 
,button to selectKeypad Sounditem.
3. Press the 
,button to select On or Off. 
 You can use this function through the  button on the control panel.Press the MENUbutton twice or the RETURNbutton to exit the menu screen.
Keypad Sound Function
Color temp.
Smart picture
Black level
Keypad Sound
Keypad LED
Screen CaptureNormal
Normal
High
MENU Prev.        Move            Select
On
On
1. Press the MENUbutton...

Function
23
Screen Capture Function
1. Press the MENUbutton and then use ,button to select the         menu.
2. Press the 
,button to selectScreen Captureitem.
3. Press the OK button to capture actual screen image. 
4. Press the OK button again to save Screen capture image.
You can use the captured image as a Blank image. You can not use the remote control when this function is in use.  If you want see your captured image, select Captured image in the Blank image
function. 
 You can use this function...

Function
24
Special Menu Options
1. Press the MENUbutton and then use ,button to select the         menu.
2. Press the  
,button to selectLanguageitem.
3. Press the 
,button to select the language you want to use.
On-Screen-Display (OSD) is displayed in the selected language. You can use this function through the  button on the control panel.Press the MENUbutton twice or the RETURNbutton to exit the menu screen.
Selecting Language
1. Press the RATIObutton on the remote control.
Each press of the...

Function
25
Flip horizontal Function
* This function reverses the projected image horizontally.
Use this function when rear projecting an image.
1. Press the MENUbutton and then use ,button to select the         menu.
2. Press the 
,button to selectFlip horizontalitem.
3. Press the OKbutton to see reversed image.
Each time you press the OKbutton, the image will be reversed. You can use this function through the  button on the control panel.Press the MENUbutton twice or the RETURNbutton to exit the...

Function
26
* The sleep timer turns the projector off at the preset time.
Sleep time Function
1. Press the MENUbutton and then use ,button to select the         menu.
2. Press the 
,button to selectAuto sleepitem.
3. Press the 
,button to select the desired preset time.
 You can use this function through the  button on the control panel.Press the MENUbutton twice or the RETURNbutton to exit the menu screen.
Auto sleep Function
* This function turns the projector off automatically after the preset time...

Function
27
1. Press the MENUbutton and then use ,button to select the         menu.
2. Press the 
,button to selectPresentation timeritem and press OK
button.
3. Press the  
,button to select Time alarmor Time keeper item.
4. Press the 
,button to select the desired preset time.
5. The timer for Time keeper item starts to operate if you select specific time and press the OKbutton, and
the timer for Time alarm item starts to operate if you select specific time.
Time alarm function : If you select a...

Function
28
1. Press the BLANKbutton on the remote control.The screen turns off to a background image.You can choose the background image.
(Refer to ‘Selecting blank image’)
2. Press any button to cancel the blank function.To temporarily turn off the image, press BLANKon the remote control. Do not block the projection lens with any objects
when the projector is under operation as this could cause the objects to become heated and deformed or even cause a fire. 
Using Blank Function
* This function may...

Function
29
1. Press the MENUbutton and then use ,button to select the         menu.
2. Press the 
,button to selectLED modeitem.
3. Press the 
,button to select Normal or Dark. 
 You can use this function through the  button on the control panel. Press the MENUbutton twice or the RETURNbutton to exit the menu screen. Refer to the page 38 for DivX Reg. Code. 
LED mode Function
Keystone               0
Blank Image
LED mode
DivX Reg. Code
Black
Normal
MENU Prev.        Move            Select 

Function
30
1. Press the AUTO button of the remote controller.Image positioning and synchronization are automatically adjusted.
2. If any more manual adjustment is needed according to the various PC
mode inputs even after the auto-correction, execute 
Phase, Clock,
Horizontal 
andVertical function in       menu. In certain circumstances,
you can’t get the best picture quality by only using auto-correction.
Auto configure Function
* This function assures you of getting the best video quality by...