LG Hlt 55w Owners Manual

11Prep\br\btion
Prep\br\btion2
Front panel
A Microphone
B \bORT. IN
C	USB \bort
D	Touch buttons
• 1 STANDBY/ON
•   i|| \f\bLAY / \bAUSE)
FUNC. \f)
\bress and hold down this button for 
about 3 seconds, then press repeatedly 
to select other function.
•  - VOL + 
Adjusts speaker volume.
•   s \fSTO\b)•    Ejects or inserts disc. 
Touch the blue or r\Ved LED button to operate the unit.
E	Disc slot
\fAUTION
\brecautions in using \Vthe touch buttons
•  Do not press the touch buttons hard to make it 
work. 
-...

12Prep\br\btion
Prep\br\btion	2
Rear panel
A 
Antenna Connector
B 	
AUX IN \fL/R)
C 	
VIDEO OUT D
	
HDMI OUT
E 	
O\bTICAL IN
E
A
B
C
D
HLT55W-F2_DSGPLL_ENG_9781.indd   122010-10-13   �� 5:57:09 

13Inst\bll\btion
Inst\bll\btion	3
3
In\btallation
Mounting the main unit on\i a 
wall
You can mount the m\Vain unit on a wall\V.  
\brepare screws and brackets supplied.
Preperat\bon
UnitScrews
Unit bracket
Wall bracket
WALL BRACKET 
INSTALL GUIDE
 
1. Match the TV BOTTOM LINE of  WALL 
BRACKET INSTALL GUIDE with the\V bottom 
of TV and attach to the position.
Step 1
TV
2. When you mount it on a wall \fconcrete), use 
the wall plugs \fNot \Vsupplied). You should 
drill some holes. A guide sheet \f WALL...

14Inst\bll\btion
Inst\bll\btion	3
3. Remove the WALL BRACKET INSTALL GUIDE.
4. Fix it with screws \fnot supplied) a\Vs shown in 
the illustration b\Velow.
Step 4
5. Attach the unit bra\Vcket to the unit 
with screws \fsupplied) as sh\Vown in the 
illustration below.
Step 5
NOTE
Detach the unit from the bracket as shown below.
6. Remove the stand from the unit.
Step 6
7. Hang the main unit \Vonto the brackets, as 
shown below.
Step 7
\fAUTION
•  Do not hang onto the installed un\Vit and avoid 
any impact...

15Inst\bll\btion
Inst\bll\btion	3
Attaching the 
\bpeaker\b 
Connect speaker wires to the woofer.
To connect the cable to the woofer, press each 
plastic finger pad t\Vo open the connection 
terminal. Insert the wire and release the finger 
pad.
Setting up
Wirele\b\b connection
LED indicator of wirele\b\b \bubwoofer
LED Colo\fOpe\fation
BlueThe wireless subwoofer is 
receiving the signal of the 
unit.
Blue \fblink)The wireless subwoofer is 
trying to connect.
RedThe Wireless subwoofer is in 
standby...

16Inst\bll\btion
Inst\bll\btion	3
Setting an ID of wirele\b\b \bubwoofer
When the unit is m\Vanufactured, the ID is 
already set. If an interference occurs or you  
use a new wireless subwoofer, an ID should be \V
set again.
1. \bress HOME \f).
2. Use I/i to select the [Setup] and 
press ENTER \f). The [Setup] menu appears.
3. Use U/u to select [AUDIO] option then \V
press i to move to the second level.
4. Use U/u to select the [Connecting 
Speakers] option then p\Vress ENTER \f) to 
move to the third...

17Inst\bll\btion
Inst\bll\btion	3
\fonnection\b to Your 
TV
Make one of the following connections, 
depending on the ca\Vpabilities of your existing 
equipment.
NOTE
• Depending on your TV and other equipme\Vnt 
you wish to connect, there are various ways 
you could connect the unit. Use on\Vly one of the 
connections described in this manua\Vl.
•  \blease refer to the manuals of y\Vour TV, Stereo 
System or other devices as necessary to make 
the best connections.
•  Make sure the unit is conn\Vected...

18Inst\bll\btion
Inst\bll\btion	3
NOTE
•  If a connected HDMI device does not acce\Vpt 
the audio output o\Vf the unit, the HD\VMI device
’s audio sound may be distorted or may not 
output.
•   When you connect a HDMI or DVI compatible 
device make sure of the following: 
-   Try switching off the HDMI/D\VVI device and this 
unit. Next, switch on the HDMI/DVI device and 
leave it for around 30 seconds, then switch on 
this unit.
  -   The connected device’s video input is s\Vet 
correctly for this unit....

19Inst\bll\btion
Inst\bll\btion	3
Re\bolution Setting
The player provides several output resolutions 
for HDMI OUT jacks. You can change the 
resolution using [Setup] menu.
1. \bress  HOME.
2. Use I/i to select the [Setup] and press  
ENTER. The [Setup] menu appears\V.
3. Use U/u to select [Display] option then 
press i to move to the second level. 
4. Use U/u to select the [Resolution] option \V
then press i to move to the third level.
5. Use U/u to select the desired resolution 
then press  ENTER to...

2\fInst\bll\btion
Inst\bll\btion	3
Optional Equipment 
\fonnection
AUX In \fonnection
Connect an Output of aux\Viliary device to the 
AUX \fL/R) IN\bUT Connector.
AUX IN Connect\bon
Un\bt
Red
Wh\bte
To the audio output \ejacks 
of you\f component 
(TV, VCR, etc.)
NOTE
If your TV has only one outp\Vut for audio \fmono), 
connect it to the left \fwhite) audio jack on th\Ve unit.
AUDIO (PORT. IN) In 
\fonnection
Connect an output of por\Vtable device \fM\b3 
or \bM\b etc) to the AUDIO \f\bORT. IN) input...