LG Hlb54s Owners Manual

11 aOPEN/CLOSE (Z)
Ejects or inserts disc from the slot loader.
bi i
/ X(PLAY / PAUSE)
Starts playback.
Pause playback temporarily, 
press again to exit pause mode. 
cx(STOP)
Stops playback.
dI II
I 
 i
ii
i
Go to next or previous file/track/chapter.
eFunction (F)
Selects the function and input source.
fVolume (-/+)
Controls the volume when using any function.g1 1
(POWER) Button
Switches the unit ON or OFF. 
hUSB Port
Connect a USB device.
iDisc Slot
Insert a disc here.
jDisplay Window 
Shows the current...

12aiPod connector
Connect the iPod dock on the rear of the unit.
bFM ANTENNA Connector
Connect the FM antenna.
cOPTICAL IN
Connect to digital (optical) audio equipment.
dVIDEO OUT
Connect to a TV with video inputs.
ePORT. IN
Connect to a portable player with audio outputs.fLAN port
Connect a network with an always-on 
broadband connection.
gHDMI IN (Type A) 1/2 
Connect to an external source with HDMI outputs.
hHDMI OUT 
Connect to TV with HDMI inputs. (Interface for digital audio and video)
ab cdef g h...

Setting upInstall an unit and a sub woofer as shown in the illustration below.
(Recommanded)Plug the power cord of the unit and sub woofer into the power source.The TV is not supplied.The wireless subwoofer makes setup simple, too-
there are no cables to connect. When you turn on the unit and
subwoofer the connection will be completed automatically.
You can set up wireless connection manually, when your connection is not
completed. 
Case 1 : If he wireless connection indicator will blink, press and hold...

Connections to Your TVMake one of the following connections, depending on the capabilities of
your existing equipment.
Tips:
•Depending on your TV and other equipment you wish to connect, there
are various ways you could connect the player. Use only one of the 
connections described below.
•Please refer to the manuals of your TV, Stereo System or other devices
as necessary to make the best connections.
Cautions:
•Make sure the player is connected directly to the TV. Tune the TV to the
correct video input...

15
Additional Information for HDMI
•When you connect a HDMI or DVI compatible device make sure of the
following:
-Try switching off the HDMI/DVI device and this player. Next, switch on
the HDMI/DVI device and leave it for around 30 seconds, then switch
on this player.
-The connected device’s video input is set correctly for this unit.
-The connected device is compatible with 720x576p, 1280x720p,
1920x1080i or 1920x1080p video input.
•Not all HDCP-compatible HDMI or DVI devices will work with this...

16Resolution SettingThe player provides several output resolutions for HDMI OUT. 
You can change the resolution using [Setup] menu or pressing the 
RESOLUTION button in stop mode.
Note:
Since several factors affect the resolution of video output, see “Available
resolution according to the resolution setting” on the right.How to change the resolution using RESOLUTION buttonPress RESOLUTION repeatedly in [Home Menu] and [Setup] Menu to
change the resolution. The display window will show you the current...

17
HDMI OUT connection•For the 576i resolution setting, real output resolution of HDMI OUT will
change to 576p.
•If you select a resolution manually and then connect the HDMI jack to
TV and your TV does not accept it, the resolution setting is set to [Auto].
•If you select a resolution that your TV does not accept, the warning 
message will appear. After resolution change, if you cannot see the
screen, please wait 20 seconds and the resolution will automatically
revert back to the previous resolution....

18Connecting to your Home NetworkThis player can be connected to a local area network (LAN) via the LAN
port on the rear panel or the internal wireless module. 
By connecting the unit to a broadband home network, you have access to
services such as software updates, My Media, BD-Live interactivity and
streaming services.Wired networkConnect the player’s LAN port to the corresponding port on your Modem or
Router using a commercially available LAN or Ethernet cable (CAT5 or 
better with RJ45 connector).
In...

19
Note: If there is no DHCP server on the network and you want to set
the IP address manually, select [Static] then set the [IP Address],
[Subnet Mask], [Gateway] and [DNS Server] using v V b B and
numerical buttons. If you make a mistake while entering a number,
press CLEAR to clear the highlighted part.4.
Select [OK] and press ENTER to apply network settings.
6.
If you select [Test] and press ENTER at step 5 above, the network
connection status is displayed on the screen.
You can also test it on the...

20Caution:
Wired internet connection is strongly recommended.
Using the [My Media] features, network update and video streaming 
services (such as YouTube Videos) with wireless network can be affected
by the household devices using radio frequencies.
• Adjusting [NETWORK] settings for wireless network
For the wireless network connection, the player needs to be set up for 
network communication. This adjustment can be done from the [Setup]
menu. Adjust the [NETWORK] setting as follows. 
Setting up the...