LG Hb905ta Owners Manual

21Installation
 3Installation
Component Video Connection
Connect the COMPONENT VIDEO OUT jacks on 
the player to the corresponding input jacks on 
the TV using Y Pb Pr cables. You can hear the 
sound the through the system’s speaker.
Component Connection
Player
TV
Green
Blue
Red
NOTE
When you use COMPONENT VIDEO OUT 
connection, you can change the resolution for the 
output. (Refer to “Resolution setting” on page 22.)
Video Connection
Connect the VIDEO OUT jack on the player to 
the video in jack on the...

22Installation
Installation 3
Resolution Setting
The player provides several output resolutions 
for HDMI OUT and COMPONENT VIDEO OUT 
jacks. You can change the resolution using 
[Setup] menu.
1. Press HOME (
).
2. Use I
/i
 to select the [Setup] and press 
ENTER (
). The [Setup] menu appears.
3. Use U
/u
 to select [DISPLAY ] option then 
press i
 to move to the second level. 
4. Use U
/u
 to select the [Resolution] option 
then press ENTER (
) or i
 to move to the 
third level.
5. Use U
/u
 to select...

23Installation
 3Installation
Antenna connection
Connect the supplied antenna for listening to 
the radio.
Antenna Connection
Player
NOTE
To prevent noise pickup. keep the AM Loop 
antenna away from the unit and other 
components.
After connecting the FM wire antenna, keep it as 
horizontal as possible. Be sure to fully extend the 
FM wire antenna. •
•
Connections with 
external device 
 AUX Connection
You can enjoy the sound of your component 
with the analog audio output jacks from the 
speakers of the...

24Installation
Installation 3
 PORT. IN connection
You can enjoy the sound of your portable 
audio player from the speakers of the system.
Connect the headphones (or line out ) jack of 
the portable audio player into the PORT. IN 
of this unit. And then select the [PORTABLE] 
option by pressing RADIO&INPUT and ENTER 
(
).
You can also use F button on the front panel to 
select the input mode.
PORT.IN Connection
twZG—“ˆ Œ™SGŒ›ŠUUU
 
 OPTICAL IN 1/2 
connection
You can enjoy the sound of your component...

25Installation
 3Installation
 HDMI IN connection
You can enjoy the pictures and sound of your 
component with this connection.
Connect the HDMI OUT jack of your 
component into the HDMI IN 1 or 2 jack on this 
unit. And then select the [HDMI IN 1/2] option 
by pressing RADIO&INPUT and ENTER (
).
You can also use F button on the front panel to 
select the input mode.
HDMI 1/2 Connection
To the HDMI OUT jack 
of your component 
(set-top box, digital 
satellite receiver, 
video game machine, 
etc.)
NOTE...

26Installation
Installation 3
Connecting to your 
Home Network
This player can be connected to a local area 
network (LAN) via the LAN port on the rear 
panel. 
By connecting the unit to a broadband home 
network, you have access to services such 
as software updates, Home Link, BD-LIVE 
interactivity and streaming services.
Wired network connection
Using a wired network provides the best 
performance, because the attached devices 
connect directly to the network and are not 
subject to radio frequency...

27Installation
 3Installation
Wired Network Setup
Before setting the wired network, you need to 
connect the broadband internet to your home 
network.
If there is a DHCP server on the local area 
network (LAN) via wired connection, this player 
will automatically be allocated an IP address. 
After making the physical connection, a small 
number of home networks may require the 
player’s network setting to be adjusted. Adjust 
the [NETWORK] setting as follow.
1. Select [Connection Setting] option in the...

28Installation
Installation 3
Notes on Network Connection:
Many network connection problems during 
set up can often be fi xed by re-setting the 
router or modem. After connecting the 
player to the home network, quickly power 
off   and/or disconnect the power cable of 
the home network router or cable modem. 
Then power on and/or connect the power 
cable again.
Depending on the internet service provider 
(ISP), the number of devices that can 
receive internet service may be limited by 
the applicable...

29Installation
 3Installation
USB device 
connection
This player can play movie, music and photo 
fi les contained in the USB device.
1. Insert a USB device to the USB port until it 
fi ts into place.
USB Connection - 1
When you connect the USB device on 
the HOME menu, the player plays a music 
fi le contained in the USB storage device 
automatically. If the USB storage device is 
containing various types of fi les, a menu for 
the fi le type selection will appear.
File loading may takes few minutes...

30Installation
Installation 3
NOTE
This player supports USB fl ash memory/external 
HDD formatted in FAT16, FAT32 and NTFS when 
accessing fi les (music, photo, movie). However, 
for BD-LIVE and Audio CD recording, only FAT16 
and FAT32 formats are supported. Use the USB 
fl ash memory/external HDD formatted in either 
FAT16 or FAT32 when using BD-LIVE and Audio 
CD recording.
The USB device can be used for the local storage 
for enjoying BD-LIVE discs with Internet.
This unit can support up to 4...