LG Hb 806th Owners Manual

Operating4\f
Operating4
Watching from a different 
angle 
er
If	the	disc	contains	scenes	recorded	at	different	camera	angles,	you	can	change	to	a	different	camera	angle	during	playback.
1.	 During	playback,	press	IN\bO/DISPLAY	(m)	to	display	the	On-Screen	display.
2.	 Use	\f/S	to	select	the	[Angle]	option.
3.	 Use	A/D	to	select	desired	angle.
4.	 Press	BA\fK(x)	to	exit	the	On-Screen	display.
\fhanging the \bV Aspect Ratio
eroy
You	can	change	the	TV	aspect	ratio	setting	while	playback.
1.	 During...

Operating42
Operating4
\fhanging subtitle code page
y
If	the	subtitle	is	displayed	in	broken	letter,	you	can	change	the	subtitle	code	page	to	view	the	subtitle	file	properly.
1.	 During	playback,	press	IN\bO/DISPLAY	(m)	to	display	the	playback	menu.
2.	 Use	\f/S	to	select	the	[\fode	Page]	option.
3.	 Use	A/D	to	select	desired	code	option.
	4.	 Press	BA\fK(x)	to	exit	the	On-Screen	display.
Audio \fD Recording
You	can	record	one	desired	track	or	all	of	the	tracks	in	Audio	\fD	to	a	USB	storage	device.
1....

Operating43
Operating4
8.	 Use	\f/S/A/D	to	select	[OK],	and	press	ENTER	(\b)	to	start	Audio	\fD	recording.
If	you	want	to	stop	in	progressing	Audio	\fD	recording,	press	ENTER	(\b)	while	[\fancel]	is	highlighted.
9.	 A	message	appears	when	Audio	\fD	recording	is	completed.	Press	ENTER	(\b)	to	check	the	music	file	created	in	the	destination	folder.
	
y The	table	below	shows	the	average	
recording	time	from	an	audio	track	with	
4	minutes	of	playback	time	to	a	music	file	
with	192	kbps	as	an	example.
stop...

Operating44
Operating4
Radio Operations
Be	sure	that	the	antenna	is	connected.		(Refer	to	the	page	19)
Listening to the radio
1.	 Press	RADIO&INPUT	(P)	until	TUNER	(\bM)	appears	in	the	display	window.	 The	last	received	station	is	tuned	in.
2.	 Press	and	hold	TUNING	(-/+)	for	about	two	seconds	until	the	frequency	indication	starts	to	change.	Scanning	stops	when	the	unit	tunes	in	a	station.	Or	Press	TUNING	(-/+)	repeatedly.	
3.	 Adjust	the	volume	by	rotating	 VOLUME	on	the	front	panel	or	by	pressing	VOL...

Operating45
Operating4
Enjoying the Net\fast™ 
Entertainment Access
You	can	use	various	content	services	via	Internet	with	the	Net\fast	Entertainment	Access	feature.
1.	 \fheck	the	network	connection	and	settings	(page	21).
2.	 Press	HOME	(n).
3.	 Select	the	[Net\fast]	using	A/D,	and	press	ENTER	(\b).
4.	 Select	an 	option 	using 	\f/S/A/D,	 and 	press	ENTER	(\b).
	
y Detailed	information	of	each	service,	
contact	to	the	content	provider	or	visit	
support	link	of	the	service.
	
y The	content	of	Net\fast...

5	 Troubleshooting
\broubleshooting46
Troubleshooting5
\broubleshooting
General
Symptom \fause & Solution
The	Power	does	not	turned	on.Plug	the	power	cord	into	the	wall	outlet	securely.
The	unit	does	not	start	playback.	yInsert	a	playable	disc.	(\fheck	the	disc	type,	colour	system,	and	regional	code.)
	yPlace	the	disc	with	the	playback	side	down.
	yPlace	the	disc	on	the	disc	tray	correctly	inside	the	guide.
	y\flean	the	disc.
	y\fancel	the	Rating	function	or	change	the	rating	level.
The	angle	cannot	be...

47
Troubleshooting5
Network
Symptom \fause & Solution
BD-Live	feature	does	not
work.
	yThe	connected	USB	storage	may	not	have	enough	space.	\fonnect	the	USB	storage	with	at	least	1GB	free	space.
	yEnsure	that	the	unit	is	correctly	connected	to	the	local	area	network	and	can	access	the	internet	(see	page	21).
	yYour	broadband	speed	may	not	fast	enough	to	use	the	BD-Live	features.	\fontact	your	Internet	Service	Provider	(ISP)	and	increase	the	broadband	speed	is	recommended.
	yThe	[BD-LIVE	connection]...

\broubleshooting48
Troubleshooting5
Sound
Symptom \fause & Solution
There	is	no	sound	or	the	sound	is	distorted.	y\fonnect	the	audio	connection	securely.
	yThe	input	source	setting	on	the	amplifier	or	the	connection	to	the	amplifier	is	incorrect.
	yThe	unit	is	in	scan,	slow	motion,	or	pause	mode.
	yThe	sound	volume	is	low.
	y\fheck	that	the	connected	amplifier	is	compatible	with	audio	format	output	from	the	unit.
	yThe	unit’s	HDMI	OUT	jack	is	connected	to	a	DVI	device.	The	DVI	jack	does	not	accept	audio...

6	 Appendix	
Appendix49
Appendix6
\fontrolling a \bV with 
the Supplied Remote 
\fontrol
You	can	control	your	TV	using	the	buttons	below.
By pressingYou can
1	( TV	POWER)Turn	the	TV	on	or	off.
AV/INPUTSwitch	the 	TV’s 	input 	source	between	the	 TV	and	other	input	sources.
PR/\fH	\f/SScan	up	or	down	through	memorized	channels.
VOL	+/–Adjust	the	volume	of	the	 TV
MUTETurn	the	TV’s	volume	on	or	off
Depending	on	the	unit	being	connected,	you	
may	not	be	able	to	control	your	 TV	using	some	
of	the	buttons.,...

Appendix50
Appendix6
Network Software 
Update
Network update notification
\brom	time	to	time,	performance	improvements	and/or	additional	features	or	services	may	be	made	available	to	units	that	are	connected	to	a	broadband	home	network.	If	there	is	new	software	available	and	the	unit	is	connected	to	a	broadband	home	network, 	the 	player 	will 	inform 	you 	about 	the	update	as	follows.
Option 1: 
1.	 The	update	menu	will	appear	on	the	screen	when	you	turn	on	the	player.
2.	 Use	A/D	to	select	a	desired...