LG Gr Q469 Bsya Owners Manual

							Operation
How to adjust the
temperature in the
refrigerator and
freezer
compartment•The initial Temperature of the Freezer and Refrigerator
Compartment is -20°C and 3°C respectively. 
You can now adjust the temperature of the
compartments as you want.
LED Model
LCD Model
Note
All adjust function of LCD Model is operated after
pressing any button.
NoteThe actual inner temperature varies depending on the
food status, as the indicated setting temperature is a
target temperature, not actual temperature within
refrigerator. 
Refrigeration function is weak in the initial time. Please
adjust temperature as above after using refrigerator for
minimum 2~3 days.
21
 
						

							Operation
Miracle Zone
Temperature
Transition Corner
(Optional)
Method to Use
•By pressing the button, store vegetables, fruits (at
relatively low conservation temperature) or other types
of food such as meat to be defrosted, raw fish, etc.
•You can select optimum temperature range depending
on types of food stored.
•4 step of temperature selection including 2°C, -1°C, 
-3°C, and -7°C is available. 
Vegetables/fruits and cold storage foods requiring
humidity maintenance and meats/fishes can be more
freshly stored depending on type of foods stored.
22
 
						

							Operation
Express Freezer•Please select this function for prompt freezer.
•This function is used when you want to freeze the foods
quickly. Press the Express Freezer button once, and then the
quick freeze operation starts with the lamp it.
•The Express Freezer operation takes about 3 hours. When
its operation ends, it automatically returns to the previous
temperature setting. If you want to stop the quick freeze
operation, press the EXPRESS FRZ. button once more, the
lamp goes out, and the Express Freezer operation stops and
the refrigerator returns to the previous temperature setting.
•The arrow mark graphic remains at the On status after
flickering for 4times when selecting Express Freezer is
turned “On”.
In selecting
OnIn selecting
Off
In selecting
OnIn selecting
Off
LCD Model
LED Model
23
 
						

							Operation
Vacation•This function makes the fridge-freezer work in a power
saving mode which is useful for when you are away on
holiday, by reducing energy consumption as much as
possible. 
Pressing ‘VACATION’ starts operation with lamp ON
and pressing it again stops the operation.
In selecting
OnIn selecting
Off
In selecting
OnIn selecting
Off
LCD Model
LED Model
NoteWhen the Vacation mode is “ON”, the other buttons
will not operate. When you come back from vacations,
press the vacation mode off so that other buttons work
and the refrigerator returns to previous temperature
setting.
24
 
						

							Operation
Lock
•Pressing this button stops operation of other buttons.
•”Locking” or “Un-Locking” is repeated whenever
pressing the LOCK button. 
(For “Locking” press the “LOCK” button for 3 secs.
For “Un-Locking” press the “LOCK” button for 1 secs.)
•When ‘LOCK’ is activated, pressing the other buttons
would not work. For LED Model
On/Off•Pressing this button refrigerator power is ON or OFF.
•ON or OFF is repeated whenever pressing the ON/OFF
button.
(For “OFF” press the “ON/OFF” button for 3 secs. 
For “ON” press the “ON/OFF” button for 1 secs.)
Vita Light
(Optional)•LED lamp is operated automatically for all day.
It may makes vegetable to photosynthesize.
•Viewing the laser out put with certain optical
instruments (e.g. telescopes, binoculars, glasses,
magnifyier) may pose an eye hazard.
•The LEDs will operate automatically. Do not uncover the
LEDs. Contact qualified service technician if there is any
failure in LEDs.
Vita Light 
(LEDs are located at the
rear of the vegetable
drawer)
•Use of controls or adjustments or performance of
procedures other than those specified herein may 
result in hazardous radiation exposure.
In selecting 
LOCKIn selecting 
UNLOCK
Self Test•This function automatically detects failure when failure
is found in product during the use of refrigerator.
•If the failure occurs at product and it does not operate
by pressing any button and normal indication is not
done, do not turn the power off and immediately
contact with the local service center.
•A lot of time is needed for service engineer to detect
the failed part by turning it off.
Caution
25
 
						

							Operation
Door Alarm•When the door of the fridge is left opened for a while,
the alarm sounds. 
Please contact with the local service center if warning
continue to sound even after closing the door.
Ice Making•Take out the water container, fill it up and put it back
to it’s original location.
•If you close Freezer Door or push
Water tank button, Water falls to
the ice making compartment.
•Ice will be dropped into the ice
storage bin by rotating Ice
separation handle of ice making
compartment.
•You can make ice and also use
this space as a storage space for
frozen food.
•You can use this space as storage
space for frozen food after
removing (1) (Water tank) and 
(2) (Twist Ice Maker) as shown
in the picture.(1)
(2)
Note•Rotating the ice separation handle before ice is fully
frozen may cause the remaining water drop into the
ice storage bin to lump the ice together.
•Take the ice out of the ice storage bin for use but do
not pour water into the ice storage bin to freeze the
water to ice. The ice storage bin can freeze to break.
•When the ice is full, it is designed for the ice to fall to
the bottom in case the ice storage bin can not pulled
out. Be careful not to store the ice too full.
26
 
						

							Operation
Defrosting•Defrosting takes place automatically.
•The defrosting water flows down to the evaporating
tray and is evaporated automatically.
Ice Homebar
(Optional)•Push the upper point of Homebar until ‘click’ Sound is
produced.
•After opening Ice Homebar, It is possible to use ice,
making compartment and ice storage bin.
•Never place heavy items on the ice homebar door or
allow children to hang it on.
(Not only can the ice homebar door may be demaged,
but also children may be hurt.)Caution
27
 
						

							Operation
Features
Install
Water Dispenser (Optional)
•Please assemble the VALVE ASSEMBLY after correctly
adjusting it with a DOOR HOLE.
DISPENSER PAD
GRILLE
HANDLE TANK
COVER BUCKET
CAP TANK
WATER TANK
DÉCOR PANEL
VALVE ASSEMBLY
28
 
						

							Operation
Filling of 
WATER TANK1.After turning the HANDLE Tank backward with the
WATER TANK installed at the DOOR, Open the COVER
BUCKET and then fill water using a kettle etc.
* Fill water while watching a sight glass on the front of 
the WATER TANK.
* Water up to 3can be filled.
2.Press and fix the COVER BUCKET.
3.After filling spring water, fix the HANDLE TANK at a
proper position.
Filling of 
PET Bottle1.Insert the valve assembly into the cover of a PET
bottle. (Height of PET ; Below 310MM)
2.Assemble the PET bottle on
the door.
3.Make a hole for air-inflow
on the top of the PET bottle.
When integrating the valve assembly, please proceed it
after checking if the rubber packing inside is correctly
assembled or not.Caution
29
 
						

							Operation
Wine Rack
(Optional)•Bottles can be stored laterally with this wine corner.
Then you can invert the wine rack and place it on the
shelf.
This will enable more shelf-place.
ex) in using
ex) in not using
Drinking1.Press the Dispenser Pad with a cup.
2.If pressing the Pad, water inside of the Dispenser is
supplied.
3.If slowly removing a cup from the Pad, water will not
fall down.
Do not use other beverage (milk, juice, carbonated
beverage etc) than spring water. Especially beverage
including grain must not be used (may result in failure).Caution
30