LG Gr B409 Plqa Owners Manual

							
Introduction
13
•Do not disassemble, repair or alter the appliance.
It may cause fire or abnormal operations, which may
lead to injury.
•Pull the power plug out of the socket before
replacing the interior light in the refrigerator.
Otherwise, there is a risk of electric shock.
It will cause electric shock or fire.
If possible, connect the fridge-freezer to its own individu
al
electrical outlet to prevent it and other appliances 
or
household lights from causing an overloa
d.
The supply plug of the refrigerator-freezer should be
placed in easy accessible position for quick disconnection
in emergency.
If the supply cord is damaged, it must be replaced by the
manufacturer or its service agent or a similarly qualified
person in order to avoid a hazard.
Don't store or use gasoline or other flammable vapors
and liquids in the vicinity of this or any other appliance.
In the event of an electric short circuit, grounding
(earthing) reduces the risk of electric shock by providing
an escape wire for the electric current. In order to prevent
possible electric shock, this appliance must be grounded.
Improper use of the grounding plug can result in an
electric shock. Consult a qualified electrician or service
person if the grounding instructions are not completely
understood, or if you have doubts on whether the
appliance is properly grounded.
Important Safety Instruction
Accessibility of Supply Plug
Do not modify or
extend the Power Cord length
Supply Cord
Replacement
Don't storeGrounding (Earthing)
Risk of child entrapment. 
Before you throw away your old refrigerator or freezer:
Take off the doors. 
Leave the shelves in place so that children may not easily
climb inside.
Don’t Use on
Extension Cord

• If possible, connect the fridge-freezer to its own
individual electrical outlet to prevent it and other
appliances or household lights from causing an
overload.
 from  Manual• 
						

							
Introduction
14
This appliance contains a small amount of isobutane
refrigerant (R600a), natural gas with high
environmental compatibility, but it is also
combustible. When transporting and installing the
appliance, care should be taken to ensure that no
parts of the refrigerating circuit are damaged.
Refrigerant squirting out of the pipes could ignite or
cause an eye injury. If a leak is detected, avoid any
naked flames or potential sources of ignition and air
the room in which the appliance is standing for
several minutes.
In order to avoid the creation of a flammable gas air
mixture if a leak in the refrigerating circuit occurs, the size
of the room in which the appliance may be sited depends
on the amount of refrigerant used. The room must be
1m
2in size for every 8g of R600a refrigerant inside the
appliance. The amount of refrigerant in your particular
appliance is shown on the identification plate inside the
appliance.
Never start up an appliance showing any signs of
damage. If in doubt, consult your dealer.
Important Safety Instruction
Keep ventilation openings, in the appliance enclosure
or in the built-in structure, clear of obstruction.
Do not use mechanical devices or other means to
accelerate the defrosting process, other than those
recommended by the manufacturer.
Do not damage the refrigerant circuit.
Do not use electrical appliances inside the food
storage compartments of the appliance, unless they
are of the type recommended by the manufacturer.
The refrigerant and insulation blowing gas used in the
appliance require special disposal procedures. When
disposal, please consult with service agent or a
similarly qualified person.
 
						

							
Introduction
15
•If the wall socket is loose, do not insert the power
plug.
It may cause electric shock or fire.
•Never unplug your refrigerator by pulling on the
power cord. Always grip plug firmly and pull it
straight out from the outlet.
You may disconnect a wire and cause a short circuit.
•Do not use a wet or damp cloth when cleaning the
plug. Remove any foreign matter from the power
plug pins.
Otherwise, there is a risk of fire.
•Do not put your hands into the bottom area of the
appliance.
Any Sharp edges may cause personal injury..
•After unplugging the appliance, wait for at least
five minutes before plugging it again to the wall
socket.
Abnormal operation of the freezer may cause material
damage.
•If the appliance is not to be used for a long time,
pull out the power plug.
Any deterioration in the insulation may cause fire.
•Do not let children touch or play with the control
panel on the front of the appliance.
•The refrigerant used in fridge/freezer and the
gases in the insulation material require special
disposal procedures. Ensure that none of the pipes
on the back of the appliances are damaged prior
to disposal.
Important Safety Instruction
 
						

							
Introduction
Identification of Parts
NoteIf you find some parts missing from your unit, they
may be parts only used in other models.
Removable
Glass Shelf(2 or 3)
Lamp
Multi-air Flow Duct
Fresh Zone (Optional)
Refrigerator
Temperatur
e  Control
(1 or 2)
Vegetable Drawer
Used to keep fruits
and vegetables, etc. fresh and crisp.
Ice Cube Tray
Freezer
 Compartment
Removable  Plinth Rotatable
Door Basket
(3 or 5)
Utility Corner
(movable) Bottle Holder
Door Basket
Leveling Screw Egg Tray(1 or 2)
(Optional)
Handle
 Bottle 2
16
 
						

							
Installation
17
1.Select a good location.
Place your fridge-freezer where it is easy to use.
2.Avoid placing the unit near heat sources, 
direct sunlight or moisture.
3.There must be proper air circulation around your
fridge-freezer to keep it operating efficiently. 
4.To avoid vibration, the unit must be leveled.
If required, adjust the leveling screws to compensate
for the uneven floor.
The front should be slightly higher than the rear to aid
in door closing. 
Leveling screws can be turned easily by tipping the
cabinet slightly.
Turn the leveling screws counterclockwise(        ) to
raise the unit,  clockwise(        ) to lower it.
5.Clean your fridge-freezer thoroughly and wipe off all
dust accumulated during shipping.
6.Install accessories such as ice cube box, etc., in their
proper places.They are packed together to prevent
possible damage during shipment.
7.Connect the power supply cord (or plug) to the outlet.
Don't double up with other appliances on the same
outlet.
8.To ensure proper air circulation around the fridge -
freezer, please maintain sufficient space on both the
sides as well as top and maintain at least 2 inches (5
cm) from the rear wall.
When your fridge-freezer is installed, allow it 2-3 hours to
stabilize at normal operating temperature prior to filling 
it with fresh or frozen foods.
If power plug is disconnected, allow 5 minutes delay
before restarting.
Your fridge-freezer is now ready for use.
Installation
Starting
 
						

							
Operation
Display Panel For Temperature Control
T emperature Control
Your fridge-freezer has two controls that let you regulate
the temperature in the fridge and freezer compartments.
• Initially set the TEMP. CONTROL at
"4". Then adjust the compartment
temperature according to your
desire.
• If you want an inside temperature slightly less cold or colder, turn the
knob towards WARM or COLD,
respectively. When the surrounding
temperature is low, adjust the TEMP. CONTROL 'WARM'.
Refrigerator
Freezer
18
TEMP. CONTROL
7COLDWARM1
6
54
2
3
 
						

							
Operation
• The initial Temperature of the Freezer Compartment is-18°C . You can now adjust the temperature of the 
compartment as you want.
• When you press the temperature control buttons, the temperature of Freezer compartment is repeated in the
following order.
NoteThe actual inner temperature varies depending on the
food status, as the indicated setting temperature is a
target temperature, not actual temperature within
refrigerator.
Refrigeration function is weak in the initial time.
Please adjust temperature as above after using
refrigerator for minimum 2~3 days.
LED BAR Type Freezer Compartment : 
< LED 88 Type >
< LED BAR Type >
19
LED 88 Type Freezer Compartment : 
-19°C → -21°C→ -23°C → -15°C → -17°C
-18°C → -19°C → -20°C → -21°C → -22°C → -23°C
→ -15°C → -16°C → -17°C  
 
						

							
Operation
Super Freezer
Vacation
• Please select this function for prompt freezer.
• This function is used when you want to freeze thefoods quickly. Press the ‘SUPER FRZ.’ (Super Freezer)
button once, and then the quick freeze operation starts
with the lamp on.
• The Super Freeze operation takes about 3 hours. When its operation ends, it automatically returns to the
previous temperature setting. If you want to stop the
quick freeze operation, press the ‘SUPER FRZ.’ button
once more, the lamp goes out, and the Super Freeze
operation stops and the refrigerator returns to the
previous temperature setting.
• This function makes the fridge-freezer work in a power saving mode which is useful for when you are away on
holiday, by reducing energy consumption as much as
possible.
Pressing ‘VACATION’ starts operation with lamp on
and pressing it again stops the operation.
20
Function
 
						

							
Operation
Lock• Pressing this button stops operation of other buttons.
• ”Locking” or “Un-Locking” is repeated wheneverpressing the ‘CHILD LOCK’ button. (For “Locking” or 
“Un-Locking” press the ‘CHILD LOCK’ button for 2 secs.)
• When ‘CHILD LOCK’ is activated, pressing the other 
   buttons would not work.
Self T estThis function allows you to check for operational
problems. If you think you have a problem with your
fridge-freezer, then press the temperature control
button:
- If the indicate lights move up or down, then there is no
problem with your fridge-freezer.
-  If the indicate lights do not move up or down, then
please leave the power connected and call your nearest
service agent.
Ice Making• To make ice cubes, fill the ice tray to the water level and place
it in the freezer.
• If ice cubes are required fast, press the ‘SUPER FRZ.’button.
• To remove ice cubes, hold the tray at its ends and twist gently.
TipTo remove ice cubes easily, run water on the tray
before twisting.
DefrostingDefrosting takes place automatically.
The defrosting water flows down to the evaporating tray
and is evaporated automatically.
21
 
						

							
Suggestions on food storage
Storing Food
Storing Food
•Do not store food which goes bad easily at low
temperature, such as banana, and melon.
•Allow hot food to cool prior to storing. Placing hot
food in the fridge-freezer could spoil other food, and
lead to higher electric bills.
•When storing the food, use a container with a lid. This
prevents moisture from evaporating, and helps food to
keep its taste and nutrients.
•Do not block air vents with food. Smooth circulation of
cold air keeps fridge-freezer temperature even.
•Do not open the door frequently. Opening the door
lets warm air enter the fridge-freezer, and cause
temperature to rise.
•To adjust the temperature control easily, do not store
food near the temperature control dial.
•Never keep too many foods in door rack, as this may
stop the door from fully closing.
•Do not store bottles in the freezer compartment - they
may break when frozen.
•Do not refreeze food that has been thawed. This
causes loss of taste and nutrition.
NoteIf you keep the fridge-freezer in a hot, and humid
place, frequently open its door or put a lot of
vegetables in it, dew may form in it, which has no
effect on its performance.
Remove the dew with dust cloth free from care.
22
 from  Manual•