LG Gr B359 Bqa Owners Manual

							
Before Cleaning
Cleaning
Be sure to unplug the power.
InteriorAs above.
After CleaningCheck that the power cord is not damaged, power plug
has not overheated, and that the power plug is tightly
inserted into the outlet.
Be sure to dry the appliance with a cloth after washing
it with water.
Do not use abrasive, petroleum, benzene, thinner,
hydrochloride acid, boiling water, rough brush, etc, as
they may damage parts of the fridge-freezer.
ExteriorClean the outside of the fridge-freezer with a soft cloth
soaked with hot water or liquid detergent. If you use a
detergent, be sure to wipe it with a clean wet cloth.
23
Care and  Maintena nce
 
						

							
Trouble Shooting
Problem
Fridge-Freezer
does not operate
Before calling for service, check this list.
It may save you both time and expense.
This list includes common occur
r ences that are not
the result of defective workmanship or materials in
this appliance.
Possible Causes
• Power plug may be unplugged from the electric
outlet.
Plug it in securely.
• House fuse has blown or circuit breaker has tripped.
Check and/or replace fuse and reset circuit breaker.
• Power cut. Check house lights.
Fridge or Freezer
Compartment
Temperature too
warm
• Temperature control not set on proper position. Refer to Temperature Control section.
• Appliance is placed close to heat source.
• Warm weather-frequent door openings.
• Door left open for a long time.
• Package holding door open or blocking air duct in freezer compartment.
Vibration or
Rattling or
Abnormal Noise
• The floor on which the fridge-freezer is installedmay be uneven or the fridge-freezer may be
unstable.
Make it even by rotating the leveling screw.
• Unnecessary objects placed in the back side of the fridge-freezer.
Frost or Ice
Crystals on frozen
Food
• Door may have been left ajar or package holdingdoor open.
• Too frequent or too long door openings.
• Frost within package is normal.
Moisture forms on
Cabinet Surface
• This phenomenon is likely to occur in a wet space. Wipe it with a dry towel.
24
Trouble Shooting
 
						

							
ProblemPossible Causes
Moisture collects
inside
• Too frequent or too long door openings.
•In humid weather, air carries moisture into fridge when
doors are opened.
Fridge has odor•Foods with strong odors should be tightly covered or
wrapped.
•Check for spoiled food.
•Interior needs cleaning.
Refer to CLEANING section
Door not closing
properly
• Food package is keeping door open.
Move packages that keep door from closing.
• Fridge-freezer is not level. Adjust the leveling screws.
• The floor on which the fridge-freezer is installed may be uneven or the fridge-freezer may be
unstable.
Slightly raise the front side with the leveling screw.
Interior light does
not work
• No power at outlet.
• Light lamp needs replacing.Refer to the Lamp Replacement section
Trouble Shooting
25
1. When this crossed-out wheeled bin symbol  is attached to a
    p
roduc t it means the product is covere d by the European
    Directive 2
002/9 6/EC.
2. All electrical and electronic products should be dispos
ed of
    separately from the municipal waste stream via desig
nated
    collection facilities appointed by the government or the 
local
    auth
oriti es.
3. The correct disposal of your old appliance will help prevent
 
    potential negative consequences for the environment and 
    human health.   
4. For more detailed information about disposal of your old 
    appliance, please contact your city office, waste disposal 
    service or the shop where you purchased the product.  
    
Disposal of your old appl iance
 
						

							
To Reverse the Doors
Precaution
1.
2.
3.
4.
How to Reverse the Door
1.To separate the door handle    of the left side, separ ate the
door cap    and unscrew the screw     in counterc
l ockwise
direction.Separate the door handle    of the freezer
  in the
same order. (You do not need to follow the above pr
o cedure
for the hidden 
ha ndle.)
2
1
3
4
2.After unscrewing the screw    of the right hinge cover    on
the top, separate the right hinge cover    to separ
a te the
connecting cable    .Separate the bolt    fixating th
e  upper
right hinge    ,and carefully separate the refrigerator door    .
   
3.After separating the upper left cap     of the sep arated
refrigerator door    , carefully take off the top ca
p     and
pull the cable     to connect to the hole on the left s
i de.Set
the separated top cap    at the regular position and 
s et the
cap     on the cable hole on the right side.Loosen the s
c rew
     under the cold room door     , move it to the left of 
t he
stopper    , and then connect
 i t.
5
5
6
8
11
13
7
10
10
9
12
11
12
32
31
10
21
4
32
32
26
Your fridge-freezer is designed with reversible doors,so that they may open from either
the left or right hand side to suit your kitchen design.
Before reversing the door, first of all,you should take out food and accessories like
shelves or trays which are not fixed in the fridge-freezer.
Use Torque Wrench or Spanner to fix or remove the bolt.
Do not lay the fridge-freezer down.This will cause problems.
Be careful not to drop the doors in disassembling or assenbling
.
10
11
1213
31
32
56
798
10
4.Use a sharp gimlet or knife to disconnect the cap    from the 
cover front    , loosen the screw    , and then move the cable 
    to the left to be mounted. Disconnect the cable    and the 
door switch    from the disconnected cover front    , swap the 
position of the disconnected cable    and door switch    with 
the cap    , mount them, fix them with the screw    , and then 
install the cap    .15
14
18
1438
40
16
38
1639
15
40
1615
19
14
18
3840
39
 
						

							
NoteReversing the doors is not covered by the warranty.
1
32
38
2
1
38
3832
32
30
21
2526
21
20
29
27
3231
3331
30
28
21
24
5.Loosen the bolt     of the Hinge Middle    , remove the Hinge
Middle    , and lift up the freezer door     to separate  it.
(When separating the refrigerator door, separate the bu
sh 35 
together.)Separate the hinge cover    and set it on the sepa rated
part of middle hinge    . After unscrewing the screw conn ected
to the bottom cover    connect the cover cap    on the right  side.
Loosen the pin    in counterclockwise direction and move t
o  the
hole on the left side to tighten in clockwise direction. L oosen
the bolt     connected to the lower hinge    . Unscrew the  screw
    fixating the door stopper    at the bottom of the freezer
  door 
    , and fixate it on the hole on the left side with the
  door
stopper    .And then, move the upper cap     to the righ
t  and
cove
r it. 
27
2335
28
29
2122
20
25
6.Set the separate lower hinge     on the bottom hole of the  left
side of the freezer, and tighten the bolt    . After fixating
  the 
bottom cover    at the regular position, align the freezer d
o or30 
on the pin of lower hinge     to attach it properly. Turn
  over
the separated middle hinge     and sheet hinge    to ass emble
them. And set the bush     and washer     together to ti ghten
the bolt    . (When tightening the bolt, be careful not to  cause
an scratch on the cap decor on top of the freezer door
).
8.Move the separated door handle     to the right and fixat e the
screw     on the right position to attach the door cap    . Move 
the door cap     on the right side to the left and attach it. A ttach
the freezer door handle     in the same method as the refrige rator
door handle
     .
10
21
37
36
9
19
76
7.After assembling the door by aligning the hinge hole on  the 
bottom of the refrigerator door    and the pin of the m iddle
hinge    , connect properly to the hold of the upper left 
h inge
    included in the owner’s manual. After connecting the  cable
    , tighten the bolt     to screw the screws    to the left 
h inge
cover    included in the owner’s manual. Move the hinge  cover
     attached on the left side to the right and attach
  it. 
27
24
20
21
223523
21
28
27
20
25
30
33
26
25
3027
2829
9
3132
37
367
619
9
10
 
						

							
Memo
28