LG Gr B207 Rmqa Owners Manual

							Table of contents
Introduction
Installation
Operation
Suggestion on
food storage
Care and
maintenance
2
Entry
Important safety instruction
Identification of parts
Where to locate
Door removal
Door replacement
Height adjustment
Starting
Adjusting the temperatures and functions
Ice making (Applicable to some models only)
Wine holder (Applicable to some models only)
Egg box (Applicable to some models only)
Humidity control in the vegetable compartment
Convert into a vegetable or meat compartment
Deodorizer (Applicable to some models only)
Shelf(Applicable to some models only)
Location of foods
Storing foods
How to dismantle parts
General information
Cleaning
Trouble shooting3
3
4
5
6
7
7
8
8
10
11
11
11
12
12
12
13
14
15
16
16
17
The working life of this set is 7 years since the date of delivery to consumer.
 
						

							Entry
The model and serial numbers are found on the inner case or back of refrigerator
compartment of this unit. These numbers are unique to this unit and not
available to others. You should record requested information here and retain
this guide as a permanent record of your purchase. Staple your receipt here.
Date of purchase : 
Dealer purchased from :
Dealer address :
Dealer phone no. :
Model no. :
Serial no. :
This refrigerator must be properly installed and located in accordance with the
installation instructions before it is used.
Never unplug your refrigerator by pulling on the power cord. Always grip plug firmly and
pull straight out from the outlet.
When moving your appliance away from the wall, be careful not to roll over or damage
the power cord.
After your refrigerator is in operation, do not touch the cold surfaces in the freezer
compartment, particularly when hands are damp or wet. Skin may adhere to these
extremely cold surfaces.
Unplug the power cord from the power plug for cleaning or other cares. Never touch it
with wet hands because you can get an electric shock or be hurt.
Never damage, process, severely bend, pull out, or twist power cord because power
cord damage may cause a fire or electric shock. You have doubts on whether the
appliance is properly grounded.
Never place glass products in the freezer because they may be broken when their inner
matters are frozen.
The appliance is not intended for use by young children or infirm persons without
supervision.
Young childeren should be supervised to ensure that they do not play with the
appliance.
If possible, connect the refrigerator to its own individual electrical outlet to prevent it and
other appliances or household lights from causing an overload that could cause a power
outage.
The refrigerator-freezer should be so positioned that the supply plug is accessible for
quick disconnection when accident happens.
If the supply cord is damaged, it must be replaced by the manufacturer or its service
agent or a similarly qualified person in order to avoid a hazard.
Do not modify or extend the Power Cord length.

It will cause electric shock or fire.
Don’t use an
extension cord
Accessibility of
Supply Plug
Supply Cord
Replacement
Warning
Introduction
3
Important safety instruction
 
						

							4
DANGER : Risk of child entrapment.
Before you throw away your old refrigerator or freezer :
Take off the doors 
Leave the shelves in place so that children may not easily climb inside.
The appliance is not intended for use by young children or infirm persons without
supervision.
Young children should be supervised to ensure that they do not play with the appliance.
Don’t store or use gasoline or other flammable vapor and liquids in the vicinity of this or
any other appliance.
In the event of an electric short circuit, grounding (earthing) reduces the risk of electric
shock by providing an escape wire for the electric current. 
In order to prevent possible electric shock, this appliance must be grounded 
improper use of the grounding plug can result in an electric shock. Consult a qualified
electrician or service person if the grounding instructions are not completely
understood, or if you have doubts on whether the appliance is properly grounded.Child entrapment
warning
Don’t store
Grounding (Earthing)
Introduction
Identification of parts
•If you find some parts missing from your unit, they may be parts only used in other
models. 
NOTE
Freezer 
compartmentRefrigerator
compartment
Milk product corner
Door rack Ice separation 
handle 
(Optional)
Ice making compartment (Optional)
Ice box (Optional)
Lamp
Shelf
(steel or glass)
Shelf
Door rack
Door rackDrawer
Lower cover
Lamp
Shelf
Door rack(1 piece or 2 piece)
Door rack(1 piece or 2 piece)
Shelf 
Snack drawer (Optional)
Vegetable drawer
(1 or 2)
Shelf (Folding or Normal) Egg box
Humidity switch Door rack
Wine holder
(Plastic or wire)
 
						

							Installation
Select a good
location
Where to locate
1. Place your appliance where it is easy to
use.
2. Avoid placing the unit near heat sources,
direct sunlight or moisture.
3. To ensure proper air circulation around
the fridge -freezer, please maintain
sufficient space on both the sides as well
as top and maintain at least 2 inches 
(5 cm) from the rear wall.
4. To avoid vibrations, the appliance must
be leveled.
5. Dont install the appliance below 5°C. It may cause affect the performance. 
5
Disposal of the
old applianceThis appliance contains fluid (refrigerant, lubricant)and is made of parts and materials
which are reusable and/or recyclable.
All the important materials should be sent to the collection center of waste material
and can be reused after rework (recycling). For take back, please contact with the
local agency.
 
						

							Door removal
Remove the lower cover by lifting upward.
Pass the refrigerator laterally through access
door as shown in the right figure.
Remove lower
cover  Warning
Remove the
freezer
compartment
door
Remove the
refrigerator
door
Pass the
refrigerator 
Installation
6
1) Loosen the hinge cover screws and remove
the cover.
2) Remove the keeper by rotating it to counter
clockwise (
) and then lifting the upper
hinge up (
).
3) Remove the freezer compartment door by
lifting it upward. 
1) Loosen the hinge cover screws and remove
the cover. Remove connection wire if any,
except for the earth line.
2) Remove keeper by rotating it clockwise (
)
and then remove upper hinge by lifting it up
(
).
3) Remove refrigerator compartment door by
lifting up.
•When removing the upper hinge, be careful that the door does not fall forwards.
NOTE
Ma
xMinM
axM
in
1
2 3 4 5 M
a
x
F
R
Z
T
E
MPR
E
F
T
EM
P M
i
n5 4 3 2
1
M
a
x
Lower cover
Lower hinge
Keeper
Connection
wires
Hinge cover
Upper hinge
Upper hingeKeeper
Upper hinge
Failure to do so could result in death or serious
injury. 
If your access door is too narrow for the
refrigerator remove the refrigerator door and
pass the refrigerator laterally. 
Electric Shock Hazard 
Disconnect electrical supply to refrigerator before installing.
 
						

							Installation
7
Door replacement
Mount them in the reverse sequence of removal after they pass through the access door. 
The refrigerator doors will close smoothly by heightening the front side by adjusting
the height adjusting screw. If the doors do not close correctly, performance may be
affected.
Height adjustment
If the freezer
compartment door
is lower than the
refrigerator
compartment door
If the freezer
compartment door
is higher than the
refrigerator
compartment door
After leveling the
door height
Next1. Wipe off all dust accumulated during shipping and clean your appliance thoroughly.
2. Install accessories such as the wine corner, cover evaporating tray, etc., in their
proper places. They are packed together to prevent possible damage during shipping.
3. Connect the power supply cord (or plug) to the outlet. Dont double up with other
appliances on the same outlet. Level the door by inserting flat (
-type) driver into the groove of the left height adjusting
screw and rotate it to the arrow 
direction(    ).
Level the door by inserting flat (
-type) driver into the groove of the right height
adjusting screw and rotate it to the arrow 
direction().
 
						

							Operation
8
Starting
When your refrigerator is first installed, allow it to stabilize at normal operating
temperatures for 2-3 hours prior to filling it with fresh or frozen foods. 
If operation is interrupted, wait 5 minutes before restarting.

  	


 
 	
 	

 


 

  	

  	
 	

 
 

  	




   !

  	


! #!$!% 
&  %
!! (  
#! !#!)!! !% !! (  
#! #!$! !%
Adjusting the temperatures and functions
 
						

							Operation
9








You can adjust temperature of and freezer room and refrigerator room.
❇Whenever pressing button, setting is repeated in the order of 
(Middle) ➔(Middle Strong)➔(Strong) ➔(Weak) ➔(Middle Weak).

The actual inner temperature varies depending on the food status, as the indicated
setting temperature is a target temperature, not actual temperature within
refrigerator.

Refrigeration function is weak in the initial time. Please adjust temperature as above
after using refrigerator for minimum 2~3 days.
How to adjust the
temperature in 
the freezer
compartment
How to adjust the
temperature in 
the refrigerator
compartment
Please select this function for prompt
freezer.

On is repeated whenever pressing
button.

The arrow mark graphic remains at the On
ststus when selecting Special
Refrigeration On

Super freezer function automatically turns
off if a fixed time passes.
Express freezer
EXPRESS FRZ
 
 
 
	

 
 



 
 


This button stops operation of
different button.

 Locking or Release is repeated whenever
pressing the        .

 Pressing the other button when selecting
‘LOCK’, the button does not operate.
Lock
LOCK
LOCK
CHILD LOCK
Ex) In selecting 
LOCKEx) In selecting 
LOCK again
3 SECS 3 SECS3 SECS
LOCK
Middle(-190C)➔Middle strong(-220C)➔Strong(-230C)➔Weak(-150C)➔Middle weak(-170C)
Middle(3
0C)➔Middle strong(20C)➔Strong(00C)➔Weak(60C)➔Middle weak(40C)
 
						

							Operation
10
The other
functionsDoor open warning 

3 times of warning sounds at the interval of 30 seconds if a minute passes with the
door of refrigerator and the hombar door opened or completely closed. 

Please contact with the local service center if warning continue to sound even after
closing the door.
Diagnosis (failure detection) function 

Diagnosis function automatically detects failure when failure is found in product during
the use of refrigerator. 

If failure occurs at product, it does not operate though pressing any button and normal
indication is not done. In this case, do not turn power off but immediately contact with
the local service center. A lot of time are need for service engineer to detect the failed
part if turning it off. 

Fill water in ice making box of the ice making
corner.
If water is fully filled the ice will not be
separated well and water can be dropped to
make ice lumped.

Ice will be dropped into the ice storage bin by
rotating ice separation handle of ice making
compartment.
When making Ice
[Type-1]
Ice making
[Type-2]
Ice Making (Applicable to some models only)
•Rotating the ice separation handle before ice is fully frozen may cause the
remaining water drop into the ice storage bin to lump the ice together.
NOTE
Ice Making Box
To remove ice cubes, hold the tray at its
ends and twist gently.