LG Gn B392 Cvca Owners Manual

CONTROLS FOR REFRIGERATOR COMPARTEMENT
STARTING
When your refrigerator is first installed, allow it 2-3 hours to stabili\
ze at normal operating temperatures
prior to filling it with fresh or frozen foods.
If operation is interrupted, wait 5 minutes before restarting.
11
REF. TEMP. CONTROL
MINMAX(COLDEST)
Ref. Temp Control Button
The  default setting of the temperature control button for
the refrigerator compartment is NORMAL.
To control the refrigerator temperature, press the  REF.
TEMP CONTROL...

ICE MAKING(OPTIONAL)
Choose the type of ice-making system you have.General Type
To make ice cubes, fill the ice tray with water and
place it in the freezer.
  To remove ice cubes, hold the tray at its ends and
twist gently.
To remove ice cubes easily, run water on the
tray before twisting.
Twisting Ice Serve Type
To make ice cubes, fill the ice tray with water and
insert in its position.
To remove ice cubes, hold the knob of the tray and
turn gently. Then, ice cubes drop in to the ice cube
box....

13
OPERATIONS
DEFROSTINGDefrosting takes place automatically. 
The defrosted water flows down to the evaporating tray which located in
the lower back side of the refrigerator and is evaporated automatically.\
DEODORIZER (OPTIONAL) 
●
How to use
Re-Using of Deodorizer
• As Deodorizer is located in cooling air inlet for circulating air in fre\
sh food compartment, there is no need for any handling.
• Do not prick the cooling air inlet with a sharp tip because Deodorizer m\
ay be damaged.
• When storing...

SUGGESTIONS ON FOOD STORAGE

14
STORING FOODStore fresh food in the refrigerator compartment. How food is frozen and\
 thawed is an important factor in maintaining its freshness and flavor.
Do not store food which goes bad easily at low temperatures, such as ban\
anas, pineapples, and melons.
Allow hot food to cool prior to storing. Placing hot food in the refrige\
rator could spoil other  
food, and lead to higher electric bills!
When storing the food, cover it with vinyl wrap or store in a...

CLEANING

It is important that your refrigerator be kept clean to
prevent undesirable odors. Spilled food should be
wipe up immediately, since it may acidify and stain
plastic surfaces if allowed to settle.
Never use metallic scouring pads, brushes, coarse
abrasive cleaners or strong alkaline solutions on
any surface.
Before you clean, however, remember that damp
objects will stick or adhere to extremely cold
surfaces. Do not touch frozen surfaces with wet or
damp hands.
EXTERIOR -Use a lukewarm...

LAMP REPLACEMENT

REFRIGERATOR LAMP
1.   Unplug the power cord from the outlet.
2.  Remove refrigerator shelves.
  3.  To remove the lamp cover insert
type driver at the corner of
     under hole of the lamp cover and pull it out forwards
4.  Turn the lamp counterclockwise. 5.   Assemble in reverse order of diassembly. Replacement bulb must be the sa\
me
specification as original.
16 

17IMPORTANT WARNINGS
19
DO NOT USE AN EXTENSION CORD
ABOUT GROUNDING (EARTHING)
If possible, connect the refrigerator to its own In the event of an electric short circuit, grounding
individual electrical outlet to prevent it and other (earthing) reduces the risk of electric shock by
appliances or household lights from causing an providing an escape wire for the electric current.
 
overload that could cause a power outage. In order to prevent possible electric shock, this
appliance must be grounded....

BEFORE CALLING FOR SERVICE

SERVICE CALLS CAN OFTEN BE AVOIDED!
IF YOU FEEL YOUR REFRIGERATOR IS NOT OPERATING PROPERLY, CHECK THESE POS\
SIBLE
CAUSES FIRST :
DISPOSAL OF YOUR OLD APPLIANCE
1. When this crossed-out wheeled bin symbol is attached to a product it
means the product is covered by the European Directive 2002/96/EC.
2. All electrical and electronic products should be disposed of separate\
ly from the municipal waste stream via designated collection facilities appointe\
d by
the government or...

MEMO
 

P/
    
N 
O : MFL63747311