LG Gc B409 Blqk Owners Manual

							
Care and Maintenance
Power Failure
General Information
•1~2 hour power failure does no harm to the foods
stores. Try to avoid opening and closing the door too
frequently.
Lamp Replacement
1.Unplug the power cord from the
outlet.
2.Remove fridge shelves.
3.To remove the lamp cover, insert 
type driver in the underside of
the lamp cover and pull it out
forwards.
4.Turn the lamp counterclockwise.
5.Assemble in reverse order of
disassembly.
Replacement lamp must be the same specification as
original.
LED lamp can be purchased at the service center.
• You must check the O-RING, which is made by rubber and prevent electric spark.
If You Move
Anti
Condensation
Pipe
•Take out foods from the fridge-freezer and firmly fix
the loose items with tape.
•Turn the leveling screws until they stop before moving
the fridge-freezer. Otherwise the screw may scratch
the floor or the fridge-freezer cannot move.
•The Anti-Condensation
pipe is installed around the
front side of fridge-freezer
as well as on the partition
between fridge
compartment and freezer
compartment to prevent
dewing.
•Especially after installation
or when ambient
temperature is high, the fridge-freezer may feel hot,
which is quite normal.
Anti-Condensation
Pipe
23
 from  Manual• 
						

							
Care and Maintenance
Before Cleaning
Cleaning
Be sure to unplug the power.
InteriorAs above.
After CleaningCheck that the power cord is not damaged, power plug
has not overheated, and that the power plug is tightly
inserted into the outlet.
Be sure to dry the appliance with a cloth after washing
it with water.
Do not use abrasive, petroleum, benzene, thinner,
hydrochloride acid, boiling water, rough brush, etc, as
they may damage parts of the fridge-freezer.
ExteriorClean the outside of the fridge-freezer with a soft cloth
soaked with hot water or liquid detergent. If you use a
detergent, be sure to wipe it with a clean wet cloth.
24
 
						

							
Trouble Shooting
Trouble Shooting
Problem
Fridge-Freezer
does not operate
Before calling for service, check this list.
It may save you both time and expense.
This list includes common occur
r ences that are not
the result of defective workmanship or materials in
this appliance.
Possible Causes
• Power plug may be unplugged from the electric
outlet.
Plug it in securely.
• House fuse has blown or circuit breaker has tripped.
Check and/or replace fuse and reset circuit breaker.
• Power cut. Check house lights.
Fridge or Freezer
Compartment
Temperature too
warm
• Temperature control not set on proper position. Refer to Temperature Control section.
• Appliance is placed close to heat source.
• Warm weather-frequent door openings.
• Door left open for a long time.
• Package holding door open or blocking air duct in freezer compartment.
Vibration or
Rattling or
Abnormal Noise
• The floor on which the fridge-freezer is installedmay be uneven or the fridge-freezer may be
unstable.
Make it even by rotating the leveling screw.
• Unnecessary objects placed in the back side of the fridge-freezer.
Frost or Ice
Crystals on frozen
Food
• Door may have been left ajar or package holdingdoor open.
• Too frequent or too long door openings.
• Frost within package is normal.
Moisture forms on
Cabinet Surface
• This phenomenon is likely to occur in a wet space. Wipe it with a dry towel.
25
 from  Manual• 
						

							
Trouble Shooting
ProblemPossible Causes
Moisture collects
inside
• Too frequent or too long door openings.
•In humid weather, air carries moisture into fridge when
doors are opened.
Fridge has odor•Foods with strong odors should be tightly covered or
wrapped.
•Check for spoiled food.
•Interior needs cleaning.
Refer to CLEANING section
Door not closing
properly
• Food package is keeping door open.
Move packages that keep door from closing.
• Fridge-freezer is not level. Adjust the leveling screws.
• The floor on which the fridge-freezer is installed may be uneven or the fridge-freezer may be
unstable.
Slightly raise the front side with the leveling screw.
Interior light does
not work
• No power at outlet.
• Light lamp needs replacing.Refer to the Lamp Replacement section
1. When this crossed-out wheeled bin symbol  is attached to a
    pr
oduc t it means the product is covere d by the European
    Directive 20
02/9 6/EC.
2. All electrical and electronic products should be dispose
d of
    separately from the municipal waste stream via design
ated
    collection facilities appointed by the government or the l
ocal
    autho
riti es.
3. The correct disposal of your old appliance will help prevent
 
    potential negative consequences for the environment and 
    human health.   
4. For more detailed information about disposal of your old 
    appliance, please contact your city office, waste disposal 
    service or the shop where you purchased the product.  
Disposal of your old appl iance
26
 from  Manual• 
						

							
To Reverse the Doors
Precaution
1.
2.
3.
4.
How to Reverse the Door
1.To separate the door handle     of the left side, se parate 
the door cap     and unscrew the screw     in counte rclockwise
direction.Separate the door handle    of the freezer in the
same order.
 
2
1
3
4
2.After unscrewing the screw     of the right hinge c over    
on the top, separate the right hinge cover    to sep arate 
the connecting cable    .Separate the bolt    fixating the 
up per right hinge     , and carefully separate the refrigerator 
door    . Remove the left cover    .
5
5
6
8
7
1019
9
27
Your fridge-freezer is designed with reversible doors,so that they may open from either
the left or right hand side to suit your kitchen design.
Before reversing the door, first of all,you should take out food and accessories like
shelves or trays which are not fixed in the fridge-freezer.
Use Torque Wrench or Spanner to fix or remove the bolt.
Do not lay the fridge-freezer down.This will cause problems.
Be careful not to drop the doors in disassembling or 
assembling.
3.After separating the upper left cap     of the separated
refrigerator door    , carefully take off the top 
c ap    and
pull the cable     to connect to the hole on the left side. 
Set the separated top cap    at the regular position an
d
set the cap     on the cable hole on the right side. Loosen 
the screw
     under the cold room door     , move it to the 
left o f the stopper    , and then conne ct it.
11
13
1012
11
12
32
31
10
4.Use a sharp gimlet or knife to disconnect the cap    from 
the cover front    , loosen the screw    , and then move 
the cable    to the left to be mounted. Disconnect the cable    
    and the door switch    from the disconnected cover front
    , swap the position of the disconnected cable    and door 
switch    with the cap    , mount them, fix them with the 
screw    , and then install the cap     .      15
14
18
14
3840
16
38
16
39
15
40
21
4
32
32
10
11
1213
31
32
56
798
10
1615
14
18
19
3840
39
 
						

							
NoteReversing the doors is not covered by the warranty.
1
32
41
2
41
4132
32
30
21
2526
21
20
29
27
3231
3331
30
28
21
24
5.Loosen the bolt     of the Hinge Middle     , remove the Hinge
Middle    , and lift up the freezer door     to separa
t e it.
(When separating the refrigerator door, separate the 
b ush35
together.)Separate the hinge cover    and set it on the separated
part of middle hinge    . After unscrewing the screw co
n nected
to the bottom cover    connect the cover cap    on the righ
t  side.
Loosen the pin    in counterclockwise direction and move
  to the
hole on the left side to tighten in clockwise direction.
  Loosen
the bolt     connected to the lower hinge    . Unscrew th
e  screw
    fixating the door stopper    at the bottom of the freez
e r door
    , and fixate it on the hole on the left side with t
h e door
stopper    .And then, move the upper cap     to the ri
g ht and
co
ver it. 
27
2335
28
29
2122
20
25
6.Set the separate lower hinge     on the bottom hole of t he left
side of the freezer, and tighten the bolt    . After fixat
i ng the
bottom cover    at the regular position, align the freezer
  door30 
on the pin of lower hinge     to attach it properly. Tu
r n over
the separated middle hinge     and sheet hinge    to a
s semble
them. And set the bush     and washer     together to 
t ighten
the bolt    . (When tightening the bolt, be careful not t
o  cause
an scratch on the cap decor on top of the freezer do
or).
8.Move the separated door handle     to the right and fixa te the
screw     on the right position to attach the door cap   
  .Move
the door cap     on the right side to the left and attach it.
  Attach
the freezer door handle     in the same method as the refri
g erator
door hand
l e    .1 
10
21
37
36
9
42
76
7.After assembling the door by aligning the hinge hole  on the
bottom of the refrigerator door    and the pin of the
  middle
hinge    , connect properly to the hold of the upper lef
t  hinge
    included in the alternate bag. After connecting th
e  cable
    , tighten the bolt     to screw the screws    to the lef
t  hinge
cover    included in the alternate bag. Take the right cap     out
 
of the alternate bag, then install it on the right side of the
 
refrigerator top
.
28
24
20
21
223523
21
28
27
20
25
30
33
26
25
3027
2829
3132
37
367
642
9
10