LG Ga B489 Bmca Owners Manual

							51
General Information
     Power Failure.1~2 hour power failure does no harm to the foods stores. Try to avoid opening and
closing the door too frequently.
If You Move: • Remove all food and other items from the 
  refrigerator . Fix the inner movable parts 
  (shelves, drawers and door basket) securel
• In order not to damage of adjustable 
  refrigerator legs turn them counterclockwise 
  before the transportation.
• Refrigerator should be transported in upright 
  position by any type of covered transport. 
  Should safely fix the refrigerato
  prevent any shock and fall inside vehicle 
  during transportation.
• Do not expose refrigerator to impact forces 
  during load handling. y
.
r , in order to  Anti-Condensation Pipe:
• The anti-condensation  around the front side    of the appliance to 
  prevent condensation.
• The appliance may feel hot at these places,   especially right after installation or when 
  ambient temperature is high.   pipe is installed 
• In the cold season after refrigerator 
  transportation and installation, do not turn it 
  on at least 12 hours.
Before switch on:
Anti-Condensation Pipe
CARE AND MAINTENANCE
E
N SH
G LI
 
						

							(2)(4)(4)
(1)
(5)(3)
(2)(3)
Fig. 1
(2)
(3)
(2) (3)
. (If you
52
CARE AND MAINTENANCE
Lamp Replacement 
(For bulb lamp applied model only)
1. Unplug the power cort from the outlet. 
2. Remove the room lamp lid by 
taking down while 
pulling its back 
projection.
3. Remove the lamp by turning it 
counterclockwise and replace new one.
4. Assemble in reverse order of 
disassembly.
Replacement bulb must be 
original.
the same specification as 
Lamp capacity is MAX 30W.
The lamp will remain “ON” for 7 minutes if 
the door is left open and then it is “OFF” 
reopen the door, the 
for safet
y
lamp is “On”).
You must check the O-RING, which is 
made by rubber and prevent electric
Don’t touch the lamp, in case of
long time. Because it can
NOTE
spark.
light on the
be very hot.
CAUTION!
To Reverse the Doors
The appliance is designed with reversible 
doors so that they can open both on the 
right and left sides to suit your kitchen 
design. 
CAUTION!
1. Prior to hanging the door to the opposite
    side, first of all remove all food products and
    loose accessories – shelves and trays –from
    the refrigerator.
2. Make use of a torque wrench or box wrench
    10 mm to tighten and remove the bolts.
3. Do not place the refrigerator on the floor.
4. Be careful not to drop the door while
    assembling and disassembling.
• Remove the door handles fig. 1 (1), (5)
  of refrigerating and freezing compartments
  fig. 1 (2) and then undo the screws fig. 1 (3)
  counterclockwise.
• Remove the blind plugs fig. 1 (4).
• Mount the handles fig. 1 (1), (5) and the blind
  plugs fig. 1 (4) on the opposite side in the
  reverse order.
CARE AND MAINTENANCE
 
						

							(6)
(6) (7)
(8) (9)
Fig. 2
(11)
(10)
(10)
Fig. 3
(13)(12)
(14)
(15)
(16)
Fig. 4
(12)
(13)
(17) Fig. 5
(18)
(21)
(19) (20)
Fig. 6
(22)
(23)
(24)Fig. 7
53
TROUBLE SHOOTING
• Remove the upper cover fig. 2 (7) of the
  refrigerator door by undoing the screws
  fig. 2 (6).
• Move the blind plug fig. 2 (8) to the opposite
  side in the direction of upper cover fig. 2 (7).
  Plug off the connecting cable fig. 2 (9)
  (for models with external display).
• Remove the cover fig. 3 (11) by undoing
  the screws fig. 3 (10).
• Remove the upper cover fig. 4 (13) by undoing
  the screws fig. 4 (12).
• Remove the cable holder fig. 4 (14) and fix it
  in the central part of the cover fig. 4 (13).
• Mount the blind plug fig. 4 (16) on the opposite
  side in the cover fig. 4 (13).
• Remove the cable holder fig. 4 (15) from the
  central part of the cover fig. 4 (13) and fix it on
  the opposite side of the cover fig. 4 (13). • Move the cable bundle fig. 5 (17) to the
  opposite side in the direction of the cover
  fig. 5 (13).
• Remove the door upper hinge fig. 6 (19)
  by undoing the bolts fig. 6 (18).
• Remove the refrigerating compartment door.
• Undo the rod fig. 6 (20) and secure it
  on the opposite side of the hinge fig. 6 (19).
• Fix the gasket fig. 6 (21) on the opposite side
  of the hinge fig. 6 (19).
• Remove the door central hinge fig. 7 (23)
  by undoing the bolts fig. 7 (22).
• Remove the refrigerating compartment door.
• Secure the blind plug fig. 7 (24) it on the
  opposite side of the refrigerator.CARE AND MAINTENANCE
E N SH
G LI
 
						

							Fig. 8
(25)(27)
(26)
(30)
(32)
(31)
Fig. 9
(35)
(33)
(34) Fig. 10
 However, when you want to reverse the 
 doors, you must call to service agent. 
 Reversing the doors is not covered by the 
 warranty.
Refrigerator work features
As a result of thermal strain for components of 
a refrigerator appliance can be heard crackling
noise that is not a defect and doesn’t affect 
efficiency of the appliance. This special sound 
when the thermo-regulator and compressor and
turned on is a normal state, which appears 
during the working process of appliance’s 
electric installation. 
The gas refrigerant produces a slight noise even
when the compressor is not running (this is not 
a defect.) 
While refrigerator appliance working process 
can be heard: 
- flick of the temperature relay;
- murmur of refrigerant flowing round cycle;
- cracking noise because of the materials 
  deformation by temperature. 
All that is not defect and doesn’t affect efficiency 
of the appliance.     
54
CAUTION!
• Remove the door upper hinge fig. 9 (31) by
  undoing the screws fig. 9 (30) and the bolts
  fig. 9 (32) and secure it on the opposite side
  of the hinge fig. 9 (31).
• Remove the blind plug fig. 9 (35) in the upper
  part of the refrigerating compartment door and
  fix it on the opposite side. • Remove the door closer fig. 10 (33) in the
  lower part of the refrigerating compartment
  door by undoing the screws fig. 10 (34) and
  secure it on the opposite side.
• Remove the limiter fig. 8 (25) in the lower part
  of the refrigerating compartment door by
  undoing the screws fig. 8 (26) and secure it on
  the opposite side. Do the same operation
  for the freezing compartment door.
• Remove the sleeve fig. 8 (27) in the lower part
  of the refrigerating compartment door and fix it
  on the opposite side. • Assemble the door lower hinge fig. 9 (31)
  of the refrigerating compartment, assemble the
  door central hinge fig. 7 (23) of the
  refrigerating compartment, assemble the door
  upper hinge fig. 6 (19) and plug in the
  connecting cable fig. 2 (9), mount the cover
  fig. 4 (13), fig. 3 (11) and fig. 2 (7) in the
  reverse order.
CARE AND MAINTENANCE
 
						

							55
Before calling for service, check this list or call in Support service o\
f clients. It may save 
your time and expense. This list includes common occurrences that are no\
t the result of 
defective workmanship or materials in this appliance.PROBLEM POSSIBLE CAUSES
Fridge-Freezer
does not operate
Fridge or Freezer CompartmentTemperature  too warm
Vibration or Rattling or
Abnormal Noise
Frost or Ice
Moisture forms on Cabinet Surface
Moisture collects inside • Power plug may be unplugged from the electric outlet.
Plug it in securely.
• House fuse has blown or circuit breaker has tripped. Check and/or replace fuse and reset circuit breaker.
• Power cut. Check house lights.
• Temperature control not set on proper position. 
  Refer to Temperature Control section.
• Appliance is placed close to heat source.
• Warm weather.  Frequent door openings.
• Door left open for a long time.
• Package holding door open or blocking air duct in 
  freezer compartment.
• The floor on which the appliance is installed may be
  uneven or the appliance may be unstable. Make it even by rotating the leveling screw.
• Unnecessary objects placed at the back side of the
  appliance.
• Door may have been left ajar or package holding 
  door open.
• Too frequent or too long door openings.
• Frost within package is normal.
• This can occur in a humid place. Wipe it with a dry towel.
• Too frequent or too long door openings.
• In humid weather, air carries moisture into fridge when
  doors are opened.
TROUBLE SHOOTING
E N SH
G LI
 
						

							56
PROBLEMPOSSIBLE CAUSES
Fridge has odor
Door not closing properly
Interior light does not work • Foods with strong odors should be tightly 
  covered or 
  wrapped.
• Check for spoiled food.
• Interior needs cleaning.
Refer to CLEANING section.
• Food package is keeping door open. Move packages that keep door from closing.
• The appliance doesn't stand upright. Adjust the leveling screws.
• The floor on which the fridge-freezer is installed 
  may be     uneven or the fridge-freezer may be
Slightly raise the front side with the leveling screw.
• No power at outlet.
• Light lamp needs replacing. Refer to the Lamp Replacement section.
For more information about refrigerator service and use, 
you can find at the official site of LG at «Frequently 
Asked Questions» ( www.lg.com/ru/refhelp ).
NOTE
Disposal of your old appliance
1. When this crossed-out wheeled bin symbol  is attached to a
    product it means the product is covered by the European    
    Directive 2002/96/EC.
2. All electrical and electronic products should be disposed of
    separately from the municipal waste stream via designated    
    collection facilities appointed by the government or the local    
    authorities.
3. The correct disposal of your old appliance will help prevent
    potential negative consequences for the environment and     
    human health.  
4. For more detailed information about disposal of your old
    appliance, please contact your city office, waste disposal     
    service or the shop where you purchased the product.    unstable.
TROUBLE SHOOTING
 
						

							57
FOR NOTICES
EN SH
G LI
 
						

							58
FOR NOTICES
 
						

							 from  ManualÍ 
						

							Производит ель: 
ООО «ЛГ  Электроник с РУС»
 143160,  РФ, М осковская об ласть, 
Руз ский  район, с/п  Дорохов ское, 86 км. 
Минск ого шоссе, 9
8-800-200-76-76
8-820-0071-11-11
0-800-303-000 
8-8000-805-805
2255
  (with mobile GSM)
800-0071-0005 
8-0003-271
8-800-30-800 
800-9990
 
 
 
BZ03001003
Про дукция LG се ртифициро вана.
Информацию по се ртифи кации наших 
приборов, данные о номере се ртифи ка та и 
срок е его действия, Вы м оже те п олучить в 
Сл ужб е поддержки к лиентов. 
Ðîññèÿ
Áåëàðóñü
Óêðàèíà
Êàçàõñòàí
Óçáåêèñòàí/ 
Êûð ãû çñ òà í
Ëàòâèÿ
Ëèòâà
Ýñòîíèÿ
Factory «LG Electronics RUS»
b.9, 86 km Minskoe highwa y, Rural village
Dorokhovskoe, Ruza dictrict, Moscow region,
Russian Federation, 143160
LG products are certified.
The information about our appliance certification, 
data of the certificate number and its validity, you can
get in the Customer service.
 
 
/R ussia
/Belarus
/Ukr aine
/Kaz akhstan
/Kyrgyzs tan
/Latvia
/E stonia
/Lithuania
Uzbekis
tan
LG C ustomer In torma tion C enter Служба поддержки клиентов LG /