LG G Pad 101 Instruction Manual

11
Important Notice
Some applications you download may consume battery power.
 While using downloaded applications, check the battery charge level.
3.  Before installing an open source application and OS
 WARNING
 
X If you install and use an OS other than the one provided by the manufact\
urer it may 
cause your device to malfunction. In addition, your device will no longe\
r be covered by 
the warranty
.
 
X To protect your device and personal data, only download applications from\
 trusted 
sources,...

1212
Important Notice
5.  If the screen freezes 
If the screen freezes or the device does not respond when you try to ope\
rate it:
Press and hold the Power/Lock Key + Volume Down Key for about 8 seconds to reset 
your device. To turn your device off, press and hold the  Power/Lock Key + Volume Down 
Key for about 12 seconds. If it still does not work, please contact the ser\
vice center. 

13
Getting to know your device
Front view
Volume keysFront Camera Lens
Charger/
USB port Power/Lock key
Headset jack
Speaker 

14
Getting to know your deviceGetting to know your device
Back view
SIM card/microSD 
card slot
Rear Camera Lens
Infrared (IR) LED
Microphone
Front Camera LensUse to take pictures and record videos of yourself. You can 
also use this for video chatting. Keep it clean for optimal 
performance.
Volume keys Allow you to adjust the media volumes. Press and hold both 
keys at the same time to access the QuickMemo+ feature 
while the screen is unlocked. Press the Volume Down key or 
Volume Up key twice quickly...

15
Getting to know your device
Power/Lock keyPress to lock/unlock the screen. Press and hold to turn the
tablet on/off, restart it, and activate/deactivate airplane
mode.
Headset jack Allows you to plug in an optional headset for convenient, 
hands-free conversations. You can also plug in headphones 
to listen to music.
Charger / USB port  Allows you to connect the tablet and the USB cable for 
use with the charger adapter, your PC, or other compatible 
accessories.
Speaker Use to listen to the audio...

16
Getting to know your device
Charging the device 

17
Getting to know your device
Charge the battery before using it for first time. Use the charger inclu\
ded with your device 
to charge the battery. A computer can also be used to charge the battery by connecting the 
device to it using the USB cable.
 WARNING
 
X Use only LG-approved chargers, batteries and cables. If you use unapprov\
ed chargers, 
batteries or cables, it may cause a battery charging delay or display a \
pop-up message 
regarding slow charging. This can also cause the battery to...

18
Getting to know your device
Installing the SIM card or microSD card
Before you can start exploring your new device, you need to set it up.
Your device supports the use of microSD memory cards of up to 2TB capacit\
y. Multimedia 
contents can be saved in the microSD card.
1  Open the SIM/microSD slot cover.
2   Slide the SIM card into the SIM card slot as shown in the  gure below. Make sure the 
gold contact area on the card is facing downwards.
microSD card slot
SIM card slot 

19
Getting to know your device
3  If you want to use a memory card, insert the memory card into the microS\
D card slot. 
Make sure the gold contact area is facing downwards. Slide the microSD c\
ard into the 
slot until it “clicks” into place and then close the slot cover
.
 NOTE
 
X Cards must be positioned as shown.
 
X MicroSD card is not included.
 
X Only microSIM cards work with this device.
 
X Depending on the memory card manufacturer and type, some memory cards ma\
y not be 
compatible with...

20
Getting to know your device
Locking and unlocking the device
Pressing the Power/Lock Key turns off the screen and puts the device into lock mode. The 
device automatically gets locked if it is not used for a specified perio\
d. This helps to prevent 
accidental taps and saves battery power. 
To unlock the device, press the  Power/Lock Key and swipe the screen in any direction.
 NOTE: 
 
X Double-tapping on the screen also can wake up the screen instead of the \
 Power/
Lock Key.
Changing the screen...