LG Flatron W2753v Users Guide

Make sure to read the Important Precautions before using the product. 
Keep the Users Guide(CD) in an accessible place for future reference.\
See the label attached on the product and give the information to your
dealer when you ask for service.
W2753VC
User’s Guide
 

A1
This unit has been engineered and manufactured to ensure your personal s\
afety,
however improper use may result in potential electrical  shock or fire h\
azards. In
order to allow the proper operation of all safeguards incorporated in th\
is display,
observe the following basic rules for its installation, use, and servici\
ng.
On Safety
Use only the power cord supplied with the unit. In case you use another \
power
cord, make sure that it is certified by the applicable national standard\
s if not...

A2
Important Precautions
On Installation
Do not allow anything to rest upon or roll over the power cord, and do n\
ot place
the display where the power cord is subject to damage.
Do not use this display near water such as near a bathtub, washbowl, kit\
chen
sink, laundry tub, in a wet basement, or near a swimming pool.
Displays are provided with ventilation openings in the cabinet to allow \
the release
of heat generated during operation. If these openings are blocked, built\
-up heat
can cause failures...

Important Precautions
A3
On Cleaning
Unplug the display before cleaning the face of the display screen.
Use a slightly damp (not wet) cloth. Do not use an aerosol directly on\
 the displayscreen because over-spraying may cause electrical shock.
When cleaning the product, unplug the power cord and scrub gently with a\
 soft cloth to prevent scratching. Do not clean with a wet cloth or spray wate\
r or
other liquids directly onto the product. An electric shock may occur. (\
Do not use
chemicals such as...

A4
Connecting the Display
Disassembling the stand
1.Place the monitor face down on the cushion or soft cloth.
2. Loosen the screw which is attached to the stand base, then take off the \
stand base
from stand body.
Important This illustration depicts the general model of connection. Your monitor \
may differ from
the items shown in the picture.
Do not carry the product upside down holding only the stand base. The pr\
oduct may
fall and get damaged or injure your foot.
Connecting the stand 
1.Place the...

A5A5
Connecting the Display
Before setting up the monitor, ensure that the power to the monitor, the\
 computer
system, and other attached devices is turned off. 
Positioning your display
1.Adjust the position of the panel in various ways for maximum comfort.Tilt Range: -5˚~15˚ 
Ergonomic
It is recommended that in order to maintain an ergonomic and comfortable\
 viewing
position, the forward tilt angle of the monitor should not exceed 5 degr\
ees.
Swivel Range: 355˚ 
 

A6A6
Using the Computer
1.Make sure to turn off the computer and  product. Connect the cable as be\
low
sketch map form        to        .12
Connecting the Display
Wall-outlet typeHeadphone/Earphone Input
Power Cord
A
B
C
D
Connect DVI-D Cable
Connect D-sub Cable (PC)
Connect D-sub Cable (Mac)
Connect HDMI Cable
Mac adapterFor Apple Macintosh use, a  separate plug adapter is needed
to change the 15 pin high density (3 row) D-sub VGA
connector on the supplied cable to a 15 pin  2 row connector.
DVI-D(This...

A7
Connecting the Display
OPEN
12
34
E
PO N
N
O
PE
Using the cable holder (This feature is not available in all models.)
Cable holder
 

A8
Control Panel Functions
Control Function
MENU ButtonUse this button to enter or exit from the On Screen Display.DSUB and DVI input,use this button to enter 
EZ
ZOOMING ,4:3 IN WIDE ,PHOTO EFFECT items.
HDMI input,use this button to enter  4:3 IN WIDE,
PHOTO EFFECT ,VOLUME items.
For more information,refer to page A17 -A18 .
OSD LOCKED/UNLOCKED
This function allows you to lock the current control settings, so
that these settings are not inadvertently changed. To lock the
OSD settings, press and hold...

A9
Control Panel Functions
This Indicator lights up as red when the display is
operating normally(On Mode). If the display is in
Sleep Mode (Energy Saving), this indicator color
changes to flicker. Use this button to turn the display on or off.
Power Button
Power Indicator
Use this button to select an icon in the On Screen
Display.AUTO/SET
Button
AUTO IMAGE ADJUSTMENT
When adjusting your display settings, always press
the AUTO/SET button prior to entering the On
Screen Display(OSD). This will...