LG Flatron W2452v Users Guide

							A10
On Screen Display (OSD) Control Adjustment
Screen Adjustment
Making adjustments to the image size, position and operating parameters of
the display is quick and easy with the On Screen Display Control system. 
A short example is given below to familiarize you with the use of the controls.
The following section is an outline of the available adjustments and selections
you can make using the OSD.
To make adjustments in the On Screen Display, follow these steps:
Press the MENU Button, then the main menu of the OSD appears.
To access a control, use the       or      Buttons. When the icon you want
becomes highlighted, press the AUTO/SET Button.
Use the    /       Buttonsto adjust the image to the desired level. Use the
AUTO/SET Button to select other sub-menu items.
Push the MENU Buttononce to return to the main menu to select another
function. Push the MENU Buttontwice to exit from the OSD.
NOTE
Allow the display to stabilize for at least 30 minutes before making image adjustments.
 
						

							A11
NOTE
The order of icons may differ depending on the model (A11~A20 ).
On Screen Display(OSD) Selection and Adjustment 
The following table indicates all the On Screen Display control, adjustment,
and setting menus.
●   : Adjustable R : RGB Input 
* : only for RGB/DVI Input D : DVI Input
** : only for HDMI Input  H : HDMI Input
 
						

							A12
Sub-menus
On Screen Display(OSD) Selection and Adjustment 
NOTE
OSD (On Screen Display) menu languages on the monitor may differ from the manual.
You were introduced to the procedure of selecting and adjusting an item
using the OSD system.  Listed below are the icons, icon names, and icon
descriptions of the all items shown on the Menu.
Press the MENU Button, then the main menu of the OSD appears.
Menu Name
Icons
Main Menu
Button Tip
MENU        : Exit
: Adjust (Decrease/Increase)
SET        : Enter
: Select another sub-menu
: Restart to select sub-menu
 
						

							A13
On Screen Display(OSD) Selection and Adjustment 
Main menu Sub menu Description
BRIGHTNESS
CONTRAST 
GAMMA
BLACK LEVEL
To adjust the brightness of the screen. 
To adjust the contrast of the screen.
Set your own gamma value. : -50/0/50
On the monitor, high gamma values
display whitish images and low gamma
values display high contrast images.
To set high or low offset level.
(only for HDMI input)
PICTURE
PRESET
RED
GREEN
BLUE• sRGB: Set the screen color to fit the
SRGB standard color
specification.
• 6500K: Slightly reddish white.
• 9300K: Slightly bluish white.
Set your own red color levels.
Set your own green color levels.
Set your own blue color levels.
COLOR
PICTURE
COLOR
MENU: Exit
: Decrease
: Increase
SET: Select another sub-menu
MENU: Exit
: Decrease
: Increase
SET: Select another sub-menu
RGB/DVI input
HDMI input
 
						

							A14
On Screen Display(OSD) Selection and Adjustment 
Main menu Sub menu Description
CLOCK
PHASE
SHARPNESS
To minimize any vertical bars or
stripes visible on the screen
background.
The horizontal screen size will also
change.
To adjust the focus of the display. 
This item allows you to remove
any horizontal noise and clear or
sharpen the image of characters.
To adjust the clearness of the
screen.
TRACKINGTRACKING
MENU: Exit
: Decrease
: Increase
SET: Select another sub-menu
HORIZONTAL
VERTICALTo move image left and right.
To move image up and down.
 
						

							A15
Restore all factory default settings except
LANGUAGE. 
Press the       ,        buttons to reset immediately.
On Screen Display(OSD) Selection and Adjustment 
Main menu Sub menu Description
If this does not improve the screen image, restore the factory default settings. 
If necessary, perform the white balance function again. This function will be enabled only when
the input signal is an analog signal. 
SETUPTo choose the language in which the
control names are displayed.
To adjust position of the OSD window
on the screen.LANGUAGE
OSD
POSITION
WHITE
BALANCE
OVERSCAN
FACTORY
RESET
If the output of the video card is different
the required specifications, the color
level may deteriorate due to video
signal distortion. Using this function, the
signal level is adjusted to fit into the
standard output level of the video card
in order to provide the optimal image.
Activate this function when white and
black colors are present in the screen.
(only for RGB/DVI input)   
To select the range of output image for
DTV timing in HDMI input.
(only for HDMI input)
POWER
INDICATORUse this function to set the power
indicator on the front side of the monitor
to ONor OFF.
If you set OFF, it will go off. 
If you set ONat any time, the power
indicator will automatically be turned on.
SETUP
MENU: Exit
: Adjust
: Adjust
SET: Select another 
sub-menu
RGB/DVI input
HDMI input
 
						

							A16
On Screen Display(OSD) Selection and Adjustment 
Main menu Sub menu Description
PIPTo select PIP on or off.
*It only supports D-Sub & HDMI
combination input signal.
To select PIP Window position:
• Top left
• Bottom left
• Bottom right
• Top right
*It operates only when PIP is on.PIP On/Off
PIP Position
MENU: Exit
: Adjust
: Adjust
SET: Select another sub-menu
 
						

							A17A17
On Screen Display(OSD) Selection and Adjustment 
Main menu Sub menu Description
EZ ZOOMING
The OSD screen will appear when you touch the FUNbutton on the left bottom of the
monitor.
EZ Zoom lowers the display’s resolution in
single-step increments. Depressing the button
once lowers the resolution by one step; while a
second button-press returns the resolution to
the original display settings. 
*This function is operated only if the
forteManager is installed to PC. 
*ForteManager is not supported in HDMI input.
4:3 IN WIDE
To select the image size of the screen.
*4:3 : Depending on the input video signal ratio,
it is automatically changed to an optimized
screen ratio.
SOUND
WIDE4:31:1
 
						

							A18
On Screen Display(OSD) Selection and Adjustment 
Main menu Sub menu Description
PHOTO  EFFECT- NORMAL:
The PhotoEffect function is disabled.
- GAUSSIAN BLUR:
This option is to add the effect to the screen
that the dark and sharp image becomes
brighter and more blurred.
- SEPIA:
This option changes the screen to be Sepia
tone. The Sepia tone is brown color tone.
- MONOCHROME:
This option changed the screen to be Gray
tone. The screen image is displayed with just
white, black, gray colors.
SOUND
To select or turn off the Buzzer sound.
The Buzzer sound operates in below cases:
• DC power On
• DC power Off
• Main Button Menu On
• Fun Button Menu On
• Menu Off
Use ‘AUTO/SET’ button to select sound (two
kinds of Buzzer sound) or turn off the sound,
and use ‘MENU’ button to save the selection
and exit the OSD menu.
SOUND
 
						

							A19
On Screen Display(OSD) Selection and Adjustment 
Icons
Menu Name
Sub-menu Name
Main menu Sub menu Description
INTERNET
DEMO
MOVIE
INTERNET
GAME
NORMAL
STANDARD
DEMO
SPORTS
The OSD screen will appear when you touch the                   button on the left bottom of
the monitor.
This is for animation images in videos or movies.
This is for text images (Word processing etc).
(only for RGB/DVI input)
This is for game images.
(only for HDMI input)
This is under normal operating conditions.
(only for RGB/DVI input)
This is under standard operating conditions.
(only for HDMI input)
This is just for advertising to customer in the shops.
Its setting is same with Movie mode and screen is
divided by half.
(only for RGB/DVI input)
This is for sports image.
(only for HDMI input)
*These features let you easily select the best desired
image condition optimized to the environment (ambient
illumination, image types etc)
.