LG Flatron W2284f Users Guide

Make sure to read the Important Precautions before using the product. 
Keep the User's Guide(CD) in an accessible place for future reference.\
See the label attached on the product and give the information to your
dealer when you ask for service.
W2284F
User’s Guide
 

A1
This unit has been engineered and manufactured to ensure your personal
safety, however improper use may result in potential electrical  shock or fire
hazards. In order to allow the proper operation of all safeguards
incorporated in this display, observe the following basic rules for its
installation, use, and servicing.
On Safety
Use only the power cord supplied with the unit. In case you use another \
power
cord, make sure that it is certified by the applicable national standard\
s if not being...

A2
Important Precautions
On Installation
Do not allow anything to rest upon or roll over the power cord, and do n\
ot place the
display where the power cord is subject to damage.
Do not use this display near water such as near a bathtub, washbowl, kit\
chen sink,
laundry tub, in a wet basement, or near a swimming pool.
Displays are provided with ventilation openings in the cabinet to allow \
the release of
heat generated during operation. If these openings are blocked, built-up\
 heat can
cause failures...

A3
Connecting the Display
Connecting with the PC
1.Before setting up the monitor, ensure that the power to the monitor, the\
 computersystem, and other attached devices is turned off. 
2.Connect the signal cable      .  When attached, tighten the thumbscrews to secure the 
connection.
3.Connect the power cable      with the AC-DC adapter (AC-DC power supply\
)     , and
then plug the cable in the outlet.
Wall-outlet type
PC-outlet type
DVI-D(This feature is not available in all countries.)
Mac adapterFor...

A4
Connecting the DisplayTo attach or separate the back cap
1. To attach the back cap, fix into the 2 holes as picture first then press\
 the back capto fit to the upper groove.
2. To separate the back cap, hold the bottom part and pull it out.
Kensington Security SlotConnected to a locking 
cable that can be purchased
separately at most computer stores
Back Cap
NOTE
- Cover the back cap after connecting the cables before use.
(To connect the cable, see page A3 for reference.)
 

A5
Connecting the Display
ImportantThis illustration depicts the general model of connection. Your monitor \
may differ from
the items shown in the picture.
Do not carry the monitor upside down holding only the stand base. The mo\
nitor may
fall and get damaged or injure your foot.
Tilt Range :  -5˚~15˚   Warning: Do not put your hand (finger)
between head section and stand section when
adjusting angle of screen. 
Your hand (finger) may get caught or wounded.
Ergonomic
It is recommended that in order to...

A6
Control Function
Control Panel Functions
MENU ButtonUse this button to enter or exit from the On Screen Display.
FUN ButtonUse this button to enter EZ ZOOMING, 4:3 IN WIDE ,
PHOTO EFFECT items, for more information, refer to
page A14-A15.
OSD LOCKED/UNLOCKED
This function allows you to lock the current control settings, so
that these settings are not inadvertently changed. To lock the
OSD settings, press and hold the  MENU buttonfor several
seconds. The message " OSD LOCKED" appears.
You can...

A7
Control Panel Functions
This Indicator lights up as blue when the display is
operating normally(On Mode). If the display is in
Sleep Mode (Energy Saving), this indicator color
changes to blue LED blinking state. Use this button to turn the display on or off.
Power Button
Power Indicator
Use this button to select an icon in the On Screen
Display.AUTO/SET
Button
AUTO IMAGE ADJUSTMENT
When adjusting your display settings, always press
the  AUTO/SET button prior to entering the On
Screen Display(OSD)....

A8
On Screen Display (OSD) Control Adjustment
Screen Adjustment
Making adjustments to the image size, position and operating parameters \
of
the display is quick and easy with the On Screen Display Control system. 
A short example is given below to familiarize you with the use of the co\
ntrols.
The following section is an outline of the available adjustments and sel\
ections
you can make using the OSD.
To make adjustments in the On Screen Display, follow these steps:
Press the MENU Button , then the...

A9
NOTEThe order of icons may differ depending on the model (A9~A16 ).
On Screen Display(OSD) Selection and Adjustment 
The following table indicates all the On Screen Display control, adjustment,
and setting menus.
EZ ZOOMINGTo adjust the resolution
4:
3 IN WIDETo adjust the image size
PHOTOEFFECT
NORMAL
To adjust screen color modeGAUSSIAN BLUR
SEPIA
MONOCHROME
PICTURE
BRIGHTNESSTo adjust the brightness, contrast and gamma of the screenCONTRAST
GAMMA
COLOR PRE
SET
sRGB
To customize the color of the...