LG Flatron W2271tc Users Guide

							18
On Screen Display(OSD) Selection and Adjustment 
Main menu Sub menu Description
PICTURE
MENU: Exit
: Decrease
: Increase
SET    : Select another sub-menu
BRIGHTNESS
CONTRAST 
GAMMATo adjust the brightness of the screen. 
To adjust the contrast of the screen.
Set your own gamma value. : -50 / 0 / 50
On the monitor, high gamma values
display whitish images and low gamma
values display high contrast images.
PRESET
RED
GREEN
BLUESelect the screen color. 
• sRGB: Set the screen color to fit the
sRGB standard color
specification.
• 6500K: Slightly reddish white.
• 9300K: Slightly bluish white.
Set your own red color levels.
Set your own green color levels.
Set your own blue color levels.
COLOR
MENU: Exit
: Decrease
: Increase
SET: Select another sub-menu

On Screen Display(OSD) Selection and Adjustment 
Press the      ,      buttons to reset immediately.
If this does not improve the screen image, restore the factory default settings. If necessary,
perform the white balance function again. This function will be enabled only when the input
signal is an analog signal. 
SETUP
MENU: Exit
: Adjust
: Adjust
SET    : Select another  
sub-menu
Main menu Sub menu Description
To choose the language in which the
control names are displayed.
To adjust position of the OSD window
on the screen.LANGUAGE
OSD
POSITION
WHITE
BALANCE
If the output of the video card is
different the required specifications,
the color level may deteriorate due
to video signal distortion. Using this
function, the signal level is adjusted
to fit into the standard output level of
the video card in order to provide the
optimal image.
Activate this function when white
and black colors are present in the
screen.
Restore all factory default settings except
LANGUAGE. FACTORY
RESET POWER
INDICATOR
Use this function to set the power
indicator on the front side of the monitor
to ONor OFF.
If you set OFF, it will go off. 
If you set ONat any time, the power
indicator will automatically be turned on.
W2271TC
W1971SC/W2271SC

Troubleshooting
No image appears
Check the following befor
No image appears
Do you see a OSD LOCKED message on the screen?
Is the power cord of the
display connected?
Is the power indicator
light on?
Is the power on and the
power indicator blue or
green?
Is the power indicator
amber?
Do you see an OUT OF
RANGE message on
the screen?
Do you see a CHECK
SIGNAL CABLE
message on the
screen?• Check and see if the power cord is connected
properly to the power outlet.
• Pressthe Power button.
• Adjust the brightness and the contrast.
• If the display is in power saving mode, try moving
the mouse or pressing any key on the keyboard to
bring up the screen.
• Try to turn on the PC.
• This message appears when the signal from the
PC (video card) is out of horizontal or vertical
frequency range of the display. See the
Specifications section of this manual and
configure your display again.
• This message appears when the signal cable
between your PC and your display is not
connected. Check the signal cable and try again.
• You can secure the current control settings,
so that they cannot be inadvertently changed.
You can unlock the OSD controls at any time
by pushing the MENUbutton for several
seconds: the message 

						

							19
On Screen Display(OSD) Selection and Adjustment 
TRACKING
Main menu Sub menu Description
MENU: Exit
: Decrease
: Increase
SET    : Select another sub-menu
CLOCK
PHASE
SHARPNESSTo minimize any vertical bars or
stripes visible on the screen
background.
The horizontal screen size will also
change.
To adjust the focus of the display. 
This item allows you to remove any
horizontal noise and clear or sharpen
the image of characters.
To adjust the clearness of the screen.
HORIZONTAL
VERTICALTo move image left and right.
To move image up and down.

Troubleshooting
Display image is incorrect
Display Position is
incorrect.
On the screen
background, vertical
bars or stripes are
visible.
Any horizontal noise
appearing in any
image or characters
are not clearly
portrayed.
						

							18
On Screen Display(OSD) Selection and Adjustment 
Main menu Sub menu Description
PICTURE
MENU: Exit
: Decrease
: Increase
SET    : Select another sub-menu
BRIGHTNESS
CONTRAST 
GAMMATo adjust the brightness of the screen. 
To adjust the contrast of the screen.
Set your own gamma value. : -50 / 0 / 50
On the monitor, high gamma values
display whitish images and low gamma
values display high contrast images.
PRESET
RED
GREEN
BLUESelect the screen color. 

						

							Digitally yours