LG Flatron W2271tc Users Guide

Make sure to read the Important Precautionsbefore using the product. 
Keep the Users Guide(CD) in an accessible place for future reference.
See the label attached on the product and give the information to your
dealer when you ask for service.
W1971SC
W2271SC
W2271TC
User’s Guide
 

1
This unit has been engineered and manufactured to ensure your personal safety,
however improper use may result in potential electrical  shock or fire hazards. In
order to allow the proper operation of all safeguards incorporated in this display,
observe the following basic rules for its installation, use, and servicing.
On Safety
Use only the power cord supplied with the unit. In case you use another power
cord, make sure that it is certified by the applicable national standards if not being
provided...

2
Important Precautions
Do not use this display near water such as near a bathtub, washbowl, kitchen
sink, laundry tub, in a wet basement, or near a swimming pool.
Displays are provided with ventilation openings in the cabinet to allow the release
of heat generated during operation. If these openings are blocked, built-up heat
can cause failures which may result in a fire hazard. Therefore, NEVER:
Block the bottom ventilation slots by placing the display on a bed, sofa, rug, etc.
Place the display in a...

3
Connecting the Display
IMPORTANT
This illustration depicts the general model of connection. Your monitor may differ from the items
shown in the picture.
Do not carry the product upside down holding only the stand base. The product may fall and get
damaged or injure your foot.
Before setting up the monitor, ensure that the power to the monitor, the computer
system, and other attached devices is turned off.
Connecting the stand 
1.Place the monitor face down on the cushion or soft cloth.
2.Assemble the...

4
Connecting the Display
1.  Place the monitor face down on the cushion or soft cloth.
3.Press the hook, take off the stand base from stand body.
4.Please pull the stand body lightly to separate it from the hinge body. 
2.Slide the Cable Deco Cover out from the stand body.
Hook
Disassembling the stand
 

5
Connecting the Display
Before setting up the monitor, ensure that the power to the monitor, the computer
system, and other attached devices is turned off. 
Positioning your display
1.Adjust the position of the panel in various ways for maximum comfort.
Tilt Range : -5˚~22˚                   
22
-5  
ERGONOMIC
It is recommended that in order to maintain an ergonomic and comfortable 
viewing position, the forward tilt angle of the monitor should not exceed 5 degrees.
 

6
Connecting the DisplayW2271TC
A
B
C
Connect DVI(Digital signal) Cable
Connect D-sub(Analog signal) Cable (PC)
Connect D-sub(Analog signal) Cable (Mac)
Using the Computer
1.Make sure to turn off the computer and  product. Connect signal input cable      and power cord      in order, then tighten the
screw of the signal cable. 12
DE
Wall-outlet type
MAC
Power Cord12
Mac adapterFor Apple Macintosh use, a
separate plug adapter is needed
to change the 15 pin high density
(3 row) D-sub VGA connector on
the...

Connecting the DisplayW1971SC/W2271SC
7
A
B
Connect D-sub(Analog signal) Cable (PC)
Connect D-sub(Analog signal) Cable (MAC)
Using the Computer
1.Make sure to turn off the computer and  product. 
Connect signal input cable      and power cord      in order, then tighten the
screw of the signal cable. 12
NOTE  This is a simplified representation of the rear view.
This rear view represents a general model; your display may
differ from the view as shown.
User must use shielded signal interface cables (D-sub...

8
Using Webcam Function
Connecting the USB(Universal Serial Bus) Cable 
NOTEFor more information on USB, visit the following web site.(http://www.usb.org)
With the USB cable unconnected, you will not have any trouble using the PC. 
D
E
1.You can use the monitor’s webcam function by connecting the monitor and the PC with
USB cable. 
Connect USB cable  
USB Upstream port (1 unit): Connect it with the
downstream port of the PC or laptop. 
(Your computer must support USB.) 
Connect audio cable 
1.To use the...

9
Control Panel Functions
Front Panel Controls
Use this button to enter EZ ZOOMING, 4:3 IN WIDE,
PHOTO EFFECTitems.
For more information, refer to page 17.
MENU ButtonUse this button to enter or exit from the On Screen Display.
OSD LOCKED/UNLOCKED
This function allows you to lock the current control settings, so
that these settings are not inadvertently changed. To lock the
OSD settings, press and hold the MENU buttonfor several
seconds. The message OSD LOCKED appears.
You can unlock the OSD settings at...