LG Flatron W2261v Users Guide

							A10
NOTE
The order of icons may differ depending on the model (A10~A18 ).
On Screen Display(OSD) Selection and Adjustment 
The following table indicates all the On Screen Display control, adjustment,
and setting menus.
 
   : Adjustable R : RGB Input 
* : only for RGB/DVI Input D : DVI Input
** : only for HDMI Input  H : HDMI Input
DownloadedUfromUManualMonitor.comUManuals 
						

							A11
Sub-menus
On Screen Display(OSD) Selection and Adjustment 
NOTE
OSD (On Screen Display) menu languages on the monitor may differ from the manual.
You were introduced to the procedure of selecting and adjusting an item
using the OSD system.  Listed below are the icons, icon names, and icon
descriptions of the all items shown on the Menu.
Press the MENU Button, then the main menu of the OSD appears.
Menu Name
Icons
Main Menu
Button Tip
MENU        : Exit
: Adjust (Decrease/Increase)
SET        : Enter
: Select another sub-menu
: Restart to select sub-menu
 
						

							A12
On Screen Display(OSD) Selection and Adjustment 
Main menu Sub menu Description
BRIGHTNESS
CONTRAST 
GAMMA
BLACK LEVEL
To adjust the brightness of the screen. 
To adjust the contrast of the screen.
Set your own gamma value. : -50/0/50
On the monitor, high gamma values
display whitish images and low gamma
values display high contrast images.
You can set the offset level. If you select
HIGH, the screen will be bright and if you
select ‘LOW’, the screen will be dark. 
(only for HDMI input)
* Offset?As the criteria for video signal, it is the
darkest screen the monitor can show.
PICTURE
PRESET
RED
GREEN
BLUE• sRGB: Set the screen color to fit the
SRGB standard color
specification.
• 6500K: Slightly reddish white.
• 9300K: Slightly bluish white.
Set your own red color levels.
Set your own green color levels.
Set your own blue color levels.
COLOR
PICTURE
COLOR
MENU: Exit
: Decrease
: Increase
SET: Select another sub-menu
MENU: Exit
: Decrease
: Increase
SET: Select another sub-menu
RGB/DVI input
HDMI input
DownloadedUfromUManualMonitor.comUManuals 
						

							A13
On Screen Display(OSD) Selection and Adjustment 
Main menu Sub menu Description
CLOCK
PHASE
SHARPNESS
To minimize any vertical bars or
stripes visible on the screen
background.
The horizontal screen size will also
change.
To adjust the focus of the display. 
This item allows you to remove
any horizontal noise and clear or
sharpen the image of characters.
To adjust the clearness of the
screen.
TRACKINGTRACKING
MENU: Exit
: Decrease
: Increase
SET: Select another sub-menu
HORIZONTAL
VERTICALTo move image left and right.
To move image up and down.
 
						

							A14
Restore all factory default settings except
LANGUAGE. 
Press the       ,        buttons to reset immediately.
On Screen Display(OSD) Selection and Adjustment 
Main menu Sub menu Description
If this does not improve the screen image, restore the factory default settings. 
If necessary, perform the white balance function again. This function will be enabled only when
the input signal is an analog signal. 
SETUPTo choose the language in which the
control names are displayed.
To adjust position of the OSD window
on the screen.LANGUAGE
OSD
POSITION
WHITE
BALANCE
OVERSCAN
FACTORY
RESET
If the output of the video card is different
the required specifications, the color
level may deteriorate due to video
signal distortion. Using this function, the
signal level is adjusted to fit into the
standard output level of the video card
in order to provide the optimal image.
Activate this function when white and
black colors are present in the screen.
(only for RGB/DVI input)   
To select the range of output image for
DTV timing in HDMI input.
(only for HDMI input)
Recommend overscanfunction to turn
on when connect AVequipment.
POWER
INDICATOR
RGB
RGB
RTCIf you set ON, you enable the Response
Time Control function.
If you set OFF, you disable the
Response Time Control function.
SETUP
MENU: Exit
: Adjust
: Adjust
SET: Select another sub-menu
RGB/DVI input
HDMI input
Use this function to set the power
indicator on the front side of the monitor
to ONor OFF.
If you set OFF, it will go off. 
If you set ONat any time, the power
indicator will automatically be turned on.
 
						

							A15A15
On Screen Display(OSD) Selection and Adjustment 
Main menu Sub menu Description
EZ ZOOMING
The OSD screen will appear when you touch the FUNbutton on the left bottom of the
monitor.
EZ Zoom lowers the display’s resolution in
single-step increments. Depressing the button
once lowers the resolution by one step; while a
second button-press returns the resolution to
the original display settings. 
*This function is operated only if the
forteManager is installed to PC. 
*ForteManager is not supported in HDMI input.
4:3 IN WIDE
To select the image size of the screen.
• WIDE : Switch to full screen mode according to input 
image signal.  
• 4 : 3: Change the image signal ratio into 4:3. 
VOLUME
WIDE4:3
RGB/DVI input
HDMI input
 
						

							A16
On Screen Display(OSD) Selection and Adjustment 
Main menu Sub menu Description
VOLUMETo adjust the volume of headphone/Earphone.
(only for HDMI input)VOLUME
VOLUMESET SET
PHOTO  EFFECT
•NORMAL :
The PhotoEffect function is disabled.
•GAUSSIAN BLUR :
This option is to add the effect to the screen that
the dark and sharp image becomes brighter and
more blurred.
•SEPIA :
This option changes the screen to be Sepia tone.
The Sepia tone is brown color tone.
•MONOCHROME :
This option changed the screen to be Gray tone.
The screen image is displayed with just white,
black, gray colors.
To select the color of the screen.
MONOCHROMENORMALGAUSSIAN BLURSEPIA
 
						

							A17
On Screen Display(OSD) Selection and Adjustment 
Icons
Menu Name
Sub-menu Name
Main menu Sub menu Description
The OSD screen will appear when you touch the                   button on the left bottom of
the monitor.
RGB/DVI input
HDMI input
RGB/DVI input
HDMI input
MOVIE
Select this when you are watching a video or
movie.
INTERNET
GAME
Select this when you are working on the
document (Word etc.)
Select this when you are playing a game.
NORMAL
STANDARD
Select this when you want to use the product in
the most general using environment. 
Select this when you want to use the original
standard video.
* In the General (Standard) mode, the                        
is turned off.
 
						

							A18
On Screen Display(OSD) Selection and Adjustment 
Main menu Sub menu Description
RGB/DVI input
HDMI input
DEMO
SPORTSThis is used for advertising in the store. The screen
will be divided to show the standard mode on the
left and video mode on the right so that the
consumers can check the difference after applying
the video mode. 
Select this when you watching general sports.
RGB/DVI input
HDMI input
USER
Select the           sub-menu using the AUTO/SET
buttonand save the YESvalue using the     ,  
buttons.
... HUE : Adjust the screen hue.
... SATURATION : Adjust the screen saturation.
You can manually adjust brightness, ACEor RCM
(only for RGB/DVI input), HUEor SATURATION
(only for HDMI input).
You can save or restore the adjusted value even
when using a different environment. 
...
(Brightness) : Adjusts screen brightness.
... 
ACE(Adaptive Clarity Enhancer) : Selects the clarity mode.
Not applied
Green enhance 
Flesh tone
Color Enhance
...
RCM(Real Color Management) : Selects the color mode.
Not applied
Weak clarity and luminosity contrast. 
Strong clarity and luminosity contrast. 
MENU: Exit
: Decrease
: Increase
AUTO/SET: Select another sub-menu
 
						

							A19
Troubleshooting
No image appears
Check the following before calling for service.
No image appears
Do you see a OSD LOCKED message on the screen?
Is the power cord of
the display connected?
Is the power indicator
light on?
Is the power on and the
power indicator red?
Is the power indicator
flicking?
Do you see an OUT
OF RANGE message
on the screen?
Do you see a CHECK
SIGNAL CABLE
message on the
screen?• Check and see if the power cord is connected
properly to the power outlet.
• Press the Power button.
• Adjust the brightness and the contrast.
• If the display is in power saving mode, try moving
the mouse or pressing any key on the keyboard to
bring up the screen.
• Try to turn on the PC.
• This message appears when the signal from the
PC (video card) is out of horizontal or vertical
frequency range of the display. See the
Specifications section of this manual and
configure your display again.
• This message appears when the signal cable
between your PC and your display is not
connected. Check the signal cable and try again.
• You can secure the current control settings,
so that they cannot be inadvertently changed.
You can unlock the OSD controls at any time
by pushing the MENUbutton for several
seconds: the message 
“OSD UNLOCKED”will appear. Do you see “OSD
LOCKED” when you
push MENU button?