LG Flatron W2253s Users Guide

							A10
Control Panel Functions
This Indicator lights up as red when the display is
operating normally(On Mode). If the display is in
Sleep Mode (Energy Saving), this indicator color
changes to flicker. Use this button to turn the display on or off.
Power Button
Power Indicator
Use this button to select an icon in the On Screen
Display.AUTO/SET
Button
AUTO IMAGE ADJUSTMENT
When adjusting your display settings, always press
the AUTO/SETbutton prior to entering the On
Screen Display(OSD). This will automatically adjust
your display image to the ideal settings for the
current screen resolution size (display mode).
The best display mode is:
W2253V : 1920 x 1080
W2353V : 1920 x 1080
This is lens for light sensor sletect outside luminance,
when setting AUTO BRIGHT ON.Light SensorButtons
Use these buttons to select or adjust functions in the On
Screen Display.
For more information, refer to page A20 -A21.
Use this button to make either D-Sub,DVI or HDMI
connector active. This feature is used when two
computers are connected to the display. The default
setting is D-Sub.
Button
()
Button
(SOURCE)
Control Function
 
						

							A11
On Screen Display (OSD) Control Adjustment
Screen Adjustment
Making adjustments to the image size, position and operating parameters of
the display is quick and easy with the On Screen Display Control system. 
A short example is given below to familiarize you with the use of the controls.
The following section is an outline of the available adjustments and selections
you can make using the OSD.
To make adjustments in the On Screen Display, follow these steps:
Press the MENU Button, then the main menu of the OSD appears.
To access a control, use the       or      Buttons. When the icon you want
becomes highlighted, press the AUTO/SET Button.
Use the     /       Buttons to adjust the image to the desired level. Use the
AUTO/SET Button to select other sub-menu items.
Push the MENU Buttononce to return to the main menu to select another
function. Push the MENU Buttontwice to exit from the OSD.
NOTE
Allow the display to stabilize for at least 30 minutes before making image adjustments.
 
						

							A12
NOTE
The order of icons may differ depending on the model (A12~A21 ).
On Screen Display(OSD) Selection and Adjustment 
The following table indicates all the On Screen Display control, adjustment,
and setting menus.
   : Adjustable A : DSUB Input 
*: only for DSUB/DVI Input D : DVI Input
** : only for HDMI Input  H : HDMI Input
To adjust the resolutionTo focus on the moving picture selected.
To control screen brightness automatically.
To mind user using time.
To control touch key distance.
To control smart key menu.
Main menu             Sub-menu            A     D     H                    Reference
To adjust screen color mode
NORMAL
GAUSSIAN BLUR
SEPIA
MONOCHROME
BRIGHTNESS
CONTRAST
GAMMA
**BLACK LEVEL
PRESET
sRGB
6500K
9300K
RED
GREEN
BLUE
HORIZONTAL
VERTICAL
CLOCK
PHASE
SHARPNESS
OSD
POSITIONHORIZONTAL
VERTICAL
LANGUAGE
*WHITE BALANCE
**OVERSCAN
RTC
POWER INDICATOR
FACTORY RESET
MOVIE
*INTERNET
**GAME
USER
*NORMAL
**STANDARD
*DEMO
**SPORTS
To adjust the image size
To adjust the volume
To adjust the brightness, contrast and
gamma of the screen
To set offset level
To costomize the color of the screen
To adjust the position of the screen
To costomize the screen status for a
users operating environment
To improve the clarity and stability of the
screen
To select or customize desired image
settings
FLATRON
F-ENGINE SETUP TRACKING COLOR PICTURE VOLUME
PHOTO 
EFFECT 4: 3 IN WIDE EZ ZOOMING SMARTLIVE SENSORTIME CONTROLAUTO BRIGHT CINEMA MODE
 
						

							A13
On Screen Display(OSD) Selection and Adjustment 
Sub-menus
NOTE
OSD (On Screen Display) menu languages on the monitor may differ from the manual.
You were introduced to the procedure of selecting and adjusting an item
using the OSD system.  Listed below are the icons, icon names, and icon
descriptions of the all items shown on the Menu.
Press the MENU Button, then the main menu of the OSD appears.
Menu Name
Icons
Main Menu
Button Tip
MENU        : Exit
: Adjust (Decrease/Increase)
SET        : Enter
: Select another sub-menu
: Restart to select sub-menu
 
						

							A14
On Screen Display(OSD) Selection and Adjustment 
Main menu Sub menu Description
BRIGHTNESS
CONTRAST 
GAMMA
BLACK LEVEL
To adjust the brightness of the screen. 
To adjust the contrast of the screen.
Set your own gamma value. : -50/0/50
On the monitor, high gamma values
display whitish images and low gamma
values display high contrast images.
You can set the offset level. If you select
HIGH, the screen will be bright and if you
select ‘LOW’, the screen will be dark. 
(only for HDMI input)
* Offset?As the criteria for video signal, it is the
darkest screen the monitor can show.
PICTURE
PRESET
RED
GREEN
BLUE• sRGB: Set the screen color to fit the
SRGB standard color
specification.
• 6500K: Slightly reddish white.
• 9300K: Slightly bluish white.
Set your own red color levels.
Set your own green color levels.
Set your own blue color levels.
COLOR
PICTURE
COLOR
MENU: Exit
: Decrease
: Increase
SET: Select another sub-menu
MENU: Exit
: Decrease
: Increase
SET: Select another sub-menu
DSUB/DVI input
HDMI input
Downloaded*from*ManualMonitor.com*Manuals 
						

							A15
On Screen Display(OSD) Selection and Adjustment 
Main menu Sub menu Description
CLOCK
PHASE
SHARPNESS
To minimize any vertical bars or
stripes visible on the screen
background.
The horizontal screen size will also
change.
To adjust the focus of the display. 
This item allows you to remove
any horizontal noise and clear or
sharpen the image of characters.
To adjust the clearness of the
screen.
TRACKINGTRACKING
MENU: Exit
: Decrease
: Increase
SET: Select another sub-menu
HORIZONTAL
VERTICALTo move image left and right.
To move image up and down.
 
						

							A16
Restore all factory default settings except
LANGUAGE. 
Press the       ,        buttons to reset immediately.
On Screen Display(OSD) Selection and Adjustment 
Main menu Sub menu Description
If this does not improve the screen image, restore the factory default settings. 
If necessary, perform the white balance function again. This function will be enabled only when
the input signal is an analog signal. 
SETUPTo choose the language in which the
control names are displayed.
To adjust position of the OSD window
on the screen.LANGUAGE
OSD
POSITION
WHITE
BALANCE
OVERSCAN
FACTORY
RESET
If the output of the video card is different
the required specifications, the color
level may deteriorate due to video
signal distortion. Using this function, the
signal level is adjusted to fit into the
standard output level of the video card
in order to provide the optimal image.
Activate this function when white and
black colors are present in the screen.
(only for DSUB input)   
To select the range of output image for
DTV timing in HDMI input.
(only for HDMI input)
Recommend overscanfunction to turn
on when connect AVequipment.
POWER
INDICATOR
RTCIf you set ON, you enable the Response
Time Control function.
If you set OFF, you disable the
Response Time Control function.
SETUP
MENU: Exit
: Adjust
: Adjust
SET: Select another sub-menu
DSUB/DVI input
HDMI input
Use this function to set the power
indicator on the front side of the monitor
to ONor OFF.
If you set OFF, it will go off. 
If you set ONat any time, the power
indicator will automatically be turned on.
 
						

							A17A17
On Screen Display(OSD) Selection and Adjustment 
The OSD screen will appear when you touch the  button on the right bottom of the
monitor.
Main menu Sub menu Description
CINEMA MODE
It focuses better on the moving picture in
selected area.
*This function is operated only if the
fortemanager is installed to pc.
*
Only for DSUB and DVI input. 
If select on,it automatically controls the
brightness of display to best suit the
surrounding working environment,providing
the optimal viewing condition and maximized
user convenience.
If select off,auto brightness is off.
This function turns on the button LED for
pushing comfortable.When detect the
presence of users hand before touch it.
To adjust AUTO BRIGHT,TIME CONTROL,
LIVE SENSOR.
If select ON it turns on AUTO BRIGHT,LIVE
SENSOR and makes time CONTROL to 1HOUR.
If select off,it turns off those.
If set AUTO BRIGHT,TIME CONTROL,LIVE
SENSOR directly,this setting is changed to
USER automatically.
AUTO BRIGHT
SMARTLIVE SENSORTIME CONTROL
Remind user using time by showing alarm
OSD and flickering LED.
Selection:OFF/1HOUR/2HOUR
 
						

							A18
On Screen Display(OSD) Selection and Adjustment 
Main menu Sub menu Description
EZ ZOOMING
The OSD screen will appear when you touch the  button on the left bottom of the 
monitor.
EZ Zoom lowers the display’s resolution in 
single-step increments. Depressing the button
once lowers the resolution by one step; while a
second button-press returns the resolution to
the original display settings.  
*This function is operated only if the 
forteManager is installed to PC. 
*ForteManager is not supported in HDMI input.
4:3 IN WIDE To select the image size of the screen.
• WIDE  : Switch to full screen mode according to input 
image signal.  
•  4 : 3 : Change the image signal ratio into 4:3. 
WIDE4:3
DSUB/DVI input
HDMI input
 
						

							A19
On Screen Display(OSD) Selection and Adjustment 
Main menu Sub menu Description
VOLUMETo adjust the volume of headphone/Earphone. 
(Only for HDMI input)
PHOTO  EFFECT
•
NORMAL :
The PhotoEffect function is disabled.
• GAUSSIAN BLUR :
This option is to add the effect to the screen that 
the dark and sharp image becomes brighter and
more blurred.
• SEPIA :
This option changes the screen to be Sepia tone.
The Sepia tone is brown color tone.
• MONOCHROME :
This option changed the screen to be Gray tone.
The screen image is displayed with just white,
black, gray colors.
To select the color of the screen.
MONOCHROMENORMALGAUSSIAN BLURSEPIA
*Photo Effect feature may not work in HDMI Input. 
(Photo effect operate at DSUB format)
SET 
SET
Downloaded*from*ManualMonitor.com*Manuals