LG Flatron W2043se Users Guide
Have a look at the manual LG Flatron W2043se Users Guide online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 1069 LG manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
A20A20 Troubleshooting Display image is incorrect Display Position is incorrect. On the screen background, vertical bars or stripes are visible. Any horizontal noise appearing in any image or characters are not clearly portrayed.• Press the AUTO/SETbutton to automatically adjust your display image to the ideal setting. If the results are unsatisfactory, adjust the image position using the H position and V positionicon in the on screen display. • Press the AUTO/SETbutton to automatically adjust your display image to the ideal setting. If the results are unsatisfactory, decrease the vertical bars or stripes using the CLOCKicon in the on screen display. • Press the AUTO/SETbutton to automatically adjust your display image to the ideal setting. If the results are unsatisfactory, decrease the horizontal bars using the PHASEicon in the on screen display. • Check Control Panel --> Display --> Settings and adjust the display to the recommended resolution or adjust the display image to the ideal setting. Set the color setting higher than 24 bits (true color). Important Check Control Panel --> Display --> Settingsand see if the frequency or the resolution were changed. If yes, readjust the video card to the recommend resolution. If the recommended resolution (optimal resolution) is not selected, letters may be blurred and the screen may be dimmed, truncated or biased. Make sure to select the recommend resolution. The setting method can differ by computer and O/S (Operation System), and resolution mentioned above may not be supported by the video card performance. In this case, please ask to the computer or the video card manufacturer .
A21 Display image is incorrect ❁ The screen color is mono or abnormal. ❁ The screen blinks. • Check if the signal cable is properly connected and use a screwdriver to fasten if necessary. •Make sure the video card is properly inserted in the slot. •Set the color setting higher than 24 bits (true color) at Control Panel -Settings . • Check if the screen is set to interlace mode and if yes,change it to the recommend resolution. Troubleshooting Have you installed the display driver? ❁ Have you installed the display driver? ❁ Do you see an "Unrecognized monitor, Plug&Play (VESA DDC) monitor found" message? •Be sure to install the display driver from the display driver CD (or diskette)that comes with your display.Or,you can also download the driver from our web site:http://www.lge.com. •Make sure to check if the video card supports Plug&Play function. DownloadedPfromPManualMonitor.comPManuals
A22A22 Specifications W2043T NOTE Information in this document is subject to change without notice. Display Sync Input Video Input Resolution Plug&Play Power Consumption Dimensions &Weight Tilt Range Power Input Environmental Conditions Stand Base Power cord 20.0 inches (50.8 cm) Flat Panel Active matrix-TFT LCD Anti-Glare coating Visible diagonal size: 50.8 cm 0.2766*0.2766 mm pixel pitch Horizontal Freq. Analog : 30 - 83 kHz (Automatic) Digital : 30 - 83 kHz (Automatic) Vertical Freq. 56 - 75 Hz (Automatic) Input Form Separate TTL, Positive/Negative SOG (Sync On Green) Digital (HDCP) Signal Input 15 pin D-Sub Connector DVI - D connector (Digital) Input Form RGB Analog (0.7 Vp-p/ 75 ohm), Digital Max Analog : VESA 1600 x 900 @60 Hz Digital : VESA 1600 x 900 @60 Hz Recommend VESA 1600 x 900 @60 Hz DDC 2B (Digital), DDC 2AB (Analog) On Mode: 38 W(Typ.) Sleep Mode≤1 W Off Mode≤1 W With Stand Without Stand Width 48.36 cm / 19.04 inches 48.36 cm / 19.04 inches Height 37.68 cm / 14.83 inches 31.40 cm / 12.36 inches Depth 18.30 cm / 7.20 inches 6.30 cm / 2.48 inches Net 3.4 kg (7.56 lbs) Tilt -5˚~15˚ AC 100-240V~ 50/60Hz 1.0 A Operating Conditions Temperature 10˚C to 35 ˚C Humidity 10 % to 80 % non-Condensing Storage Conditions Temperature -20˚C to 60 ˚C Humidity 5 % to 90 % non-Condensing Attached( ), Detached ( O ) Wall-outlet type
A23A23A23 Specifications W2243T NOTE Information in this document is subject to change without notice. Display Sync Input Video Input Resolution Plug&Play Power Consumption Dimensions &Weight Tilt Range Power Input Environmental Conditions Stand Base Power cord 21.5 inches (54.6 cm) Flat Panel Active matrix-TFT LCD Anti-Glare coating Visible diagonal size: 54.6 cm 0.248*0.248 mm pixel pitch Horizontal Freq. Analog : 30 - 83 kHz (Automatic) Digital : 30 - 83 kHz (Automatic) Vertical Freq. 56 - 75 Hz (Automatic) Input Form Separate TTL, Positive/Negative SOG (Sync On Green) Digital (HDCP) Signal Input 15 pin D-Sub Connector DVI - D connector (Digital) Input Form RGB Analog (0.7 Vp-p/ 75 ohm), Digital Max Analog : VESA 1920 x 1080 @60 Hz Digital : VESA 1920 x 1080 @60 Hz Recommend VESA 1920 x 1080 @60 Hz DDC 2B (Digital), DDC 2AB (Analog) On Mode: 40 W(Typ.) Sleep Mode≤1 W Off Mode≤1 W With Stand Without Stand Width 51.64 cm / 20.33 inches 51.64 cm / 20.33 inches Height 39.60 cm / 15.59 inches 33.27 cm / 13.10 inches Depth 19.80 cm / 7.80 inches 6.20 cm / 2.44 inches Net 3.8 kg (8.49 lbs) Tilt -5˚~15˚ AC 100-240V~ 50/60Hz 1.0A Operating Conditions Temperature 10˚C to 35 ˚C Humidity 10 % to 80 % non-Condensing Storage Conditions Temperature -20˚C to 60 ˚C Humidity 5 % to 90 % non-Condensing Attached( ), Detached ( O ) Wall-outlet type
A24 Specifications W2343T NOTE Information in this document is subject to change without notice. Display Sync Input Video Input Resolution Plug&Play Power Consumption Dimensions &Weight Tilt Range Power Input Environmental Conditions Stand Base Power cord 23 inches (58.4 cm) Flat Panel Active matrix-TFT LCD Anti-Glare coating Visible diagonal size: 58.4 cm 0.266*0.266 mm pixel pitch Horizontal Freq. Analog : 30 - 83 kHz (Automatic) Digital : 30 - 83 kHz (Automatic) Vertical Freq. 56 - 75 Hz (Automatic) Input Form Separate TTL, Positive/Negative SOG (Sync On Green) Digital (HDCP) Signal Input 15 pin D-Sub Connector DVI - D connector (Digital) Input Form RGB Analog (0.7 Vp-p/ 75 ohm), Digital Max Analog : VESA 1920 x 1080 @60 Hz Digital : VESA 1920 x 1080 @60 Hz Recommend VESA 1920 x 1080 @60 Hz DDC 2B (Digital), DDC 2AB (Analog) On Mode: 42 W(Typ.) Sleep Mode≤1 W Off Mode≤1 W With Stand Without Stand Width 55.52 cm / 21.86 inches 55.52 cm / 21.86 inches Height 41.85 cm / 16.48 inches 35.77 cm / 14.08 inches Depth 19.80 cm / 7.80 inches 6.30 cm / 2.48 inches Net 4.4 kg (9.82 lbs) Tilt -5˚~15˚ AC 100-240V~ 50/60Hz 1.0A Operating Conditions Temperature 10˚C to 35 ˚C Humidity 10 % to 80 % non-Condensing Storage Conditions Temperature -20˚C to 60 ˚C Humidity 5 % to 90 % non-Condensing Attached( ), Detached ( O ) Wall-outlet type
A25 Specifications Indicator On Mode Sleep Mode Off ModeRed Flicker Off LED Color MODE Preset Modes (Resolution) Display Modes (Resolution) Horizontal Freq. (kHz) Vertical Freq. (Hz) 1 2 3 4 5 6 7 8 *9720 x 400 640 x 480 640 x 480 800 x 600 800 x 600 1024 x 768 1024 x 768 1152 x 864 1600 x 90031.468 31.469 37.500 37.879 46.875 48.363 60.123 67.500 60.00070 60 75 60 75 60 75 75 60 * Recommend Mode Display Modes (Resolution) Horizontal Freq. (kHz) Vertical Freq. (Hz) 1 2 3 4 5 6 7 8 9 10 11 *12720 x 400 640 x 480 640 x 480 800 x 600 800 x 600 1024 x 768 1024 x 768 1152 x 864 1280 x 1024 1280 x 1024 1680 x 1050 1920 x 108031.468 31.469 37.500 37.879 46.875 48.363 60.123 67.500 63.981 79.976 65.290 67.50070 60 75 60 75 60 75 75 60 75 60 60 W2043T W2243T/W2343T * Recommend Mode
A26 Installing the Wall mount plate This monitor satisfies the specifications of the Wall mount plate or the interchange device. 1. Place the monitor with its front facing downward on a soft cloth. 3.Install the Wall mount plate. Wall mount plate(Separate purchase) This is stand-type or wall mount type and is connectable with Wall mount plate. Please refer to the installation guide for more details, which is provided when Wall mount plate is purchased. Kensington Security Slot Connected to a locking cable that can be purchased separately at most computer stores. 2.Change your lock on the product as it follows and turn it in the arrow direction.