LG Flatron W2040t Users Guide

							10
Control Panel Functions
AUTO ButtonAUTO IMAGE ADJUSTMENT
When adjusting your display settings, always press
the AUTO button before entering the On Screen
Display(OSD).  (Only Analog Mode)
This will automatically adjust your display image to
the ideal settings for the current screen resolution
size (display mode).
The best display mode is
W2040T: 1600 x 900
W2240T/W2340T: 1920 x 1080
INPUT Button
Use this button to turn the display on or off.
The power indicator stays white if the display is running
properly (On Mode). If the display is in Sleep Mode
(Energy Saving), the power indicator is blinking white. Power Button &
Power Indicator
When two input signals are connected, you can select the
input signal (D-SUB/DVI) you want. When only one signal
is connected, it is automatically detected. The default
setting is D-Sub. 
(SOURCE Hot key)
Exit the OSD (On Screen Display).
EXIT Button 
 
						

							11
On Screen Display (OSD) Control Adjustment
Screen Adjustment
Making adjustments to the image size, position and operating
parameters of the display is quick and easy with the On Screen
Display Control system. 
A short example is given below to familiarize you with the use of the
controls. The following section is an outline of the available
adjustments and selections you can make using the OSD.
To make adjustments in the On Screen Display, follow these steps:
Press the discretionary Button, then the main menu of the OSD appears.
To access a control, use the corresponding  Buttons.
Use the       /     Buttons to adjust the image to the desired level. 
Use the        Button to select other sub-menu items.
Press the  EXIT Button to exit from the OSD. 1
2
3
4
 
						

							12
On Screen Display(OSD) Selection and Adjustment 
The following table indicates all the On Screen Display control, adjustm\
ent,
and setting menus.
: D-SUB(Analog signal) input 
: DVI-D(Digital signal) inputDSUBDVI-D
LANGUAGE
POWER INDICATOR
WHITE BALANCE
FACTORY RESETTo customize the screen status
for a user's operating
environmentOTHERS
HORIZONTAL
VERTICAL
CLOCK
PHASEDISPLAYTo adjust the position of the
screen  
COLOR TEMP (PRESET / USER)
GAMMACOLORTo customize the color of the
screen
BRIGHTNESS
CONTRAST
SHARPNESSPICTURETo adjust the brightness, contrast
and sharpness of the screen
NOTE  The order of icons may differ depending on the model (12~20).
DSUBDVI-D
DSUBDVI-D
DSUB
DSUB
DSUBDVI-D
DSUBDVI-D
DSUB
Main menu Sub-menu            Supported inputDescription
To improve the clarity and
stability of the screen 
F-ENGINE
ORIGINAL 
RATIO
PHOTO 
EFFECTMODETo select or customize desired
image settingsDSUBDVI-D
To adjust the image sizeDSUBDVI-D
To adjust the screen color mode
NORMAL
MOVIE
INTERNET
DEMO
WIDE
ORIGINAL
NORMAL
GAUSSIAN BLUR
SEPIA
MONOCHROME
DSUBDVI-D
 
						

							13
On Screen Display(OSD) Selection and Adjustment 
You were introduced to the procedure of selecting and adjusting an item
using the OSD system. Listed below are the icons, icon names, and icon
descriptions of the all items shown on the Menu.
Sub-
menus
NOTEOSD (On Screen Display) menu languages on the monitor may differ from \
the manual.
Menu Name
Icons
Button
Tip
Exit
Adjust (Decrease/Increase)
Select another sub-menu
Restart to select sub-menu
Press the MENUButton, then the main menu of the OSD appears.
 
						

							14
On Screen Display(OSD) Selection and Adjustment 
Main menu Sub menu Description
Exit: Exit
: Decrease
: Increase
: Select another sub-menu
: Restart to select sub-menu
BRIGHTNESS
CONTRAST 
SHARPNESS To adjust the brightness of the screen. 
To adjust the contrast of the screen.
To adjust the clearness of the screen.
PRESET
Select the screen color.  • sRGB: Set the screen color to fit the sRGB standard color
specification.
• 6500K: Slightly reddish white.
• 9300K: Slightly bluish white.
REDSet your own red color levels.
GREENSet your own green color levels.
BLUESet your own blue color levels.
GAMMA Set your own gamma value. : 0 / 1 / 2
On the monitor, high gamma values
display whitish images and low
gamma values display blackish
images.
COLOR TEMP
USER
Exit : Exit
: Decrease
: Increase
: Select another sub-menu
: Restart to select sub-menu
 
						

							15
On Screen Display(OSD) Selection and Adjustment 
Main menu Sub menu Description
CLOCK
PHASETo minimize any vertical bars or
stripes visible on the screen
background.
The horizontal screen size will also
change.
To adjust the focus of the display. 
This item allows you to remove any
horizontal noise and clear or sharpen
the image of characters.
HORIZONTAL
VERTICALTo move image left and right.
To move image up and down.
Exit
: Exit
: Decrease
: Increase
: Select another sub-menu
: Restart to select sub-menu
 
						

							16
On Screen Display(OSD) Selection and Adjustment 
Press the      ,       buttons to reset
immediately.
Main menu Sub menu Description
To choose the language in which the
control names are displayed.LANGUAGEWHITE
BALANCE
If the output of the video card is
different the required specifications,
the color level may deteriorate due
to video signal distortion. Using this
function, the signal level is adjusted
to fit into the standard output level of
the video card in order to provide the
optimal image.
Activate this function when white
and black colors are present in the
screen.
Restore all factory default settings except
"LANGUAGE." FACTORY
RESET
POWER
INDICATOR
Use this function to set the power
indicator on the front side of the monitor
to 
ON or OFF .
If you set  OFF, it will go off. 
If you set  ONat any time, the power
indicator will automatically be turned on.
NOTE  
If this does not improve the screen image, restore the factory default s\
ettings. If necessary, execute the
WHITE BALANCE function again. This function will be enabled only when the input signal\
 is an analog
signal. 
Exit  : Exit
: Decrease
: Increase
: Select another sub-menu
: Restart to select sub-menu
 
						

							17
On Screen Display(OSD) Selection and Adjustment 
You were introduced to the procedure of selecting and adjusting an item
using the OSD system. Listed below are the icons, icon names, and icon
descriptions of the all items shown on the Menu.
NOTEOSD (On Screen Display) menu languages on the monitor may differ from \
the manual.
Sub-
menus
Menu Name
Icons
Button
Tip
Press the 
MODEButton, then the main menu of the OSD appears.
Exit: Exit,    : Move
: Select another sub-menu
: Restart to select sub-menu
 
						

							18
On Screen Display(OSD) Selection and Adjustment 
Main menu Sub menu Description
NORMALSelect this when you want to use the product
in the most general using environment. 
MOVIE Select this when you are watching a video or
movie.
INTERNETSelect this when you are working on the
document (Word etc.)
DEMO
This is used for advertising in the store. The
screen will be divided to show the standard
mode on the left and video mode on the right so
that the consumers can check the difference
after applying the video mode. 
Exit : Exit,    : Move
: Select another sub-menu
: Restart to select sub-menu
 
						

							19
On Screen Display(OSD) Selection and Adjustment 
Main menu Sub menu Description
Change the input image signal ratio to
original. 
WIDEORIGINALSwitch to full screen mode according to
input image signal.  
* This function works only if input
resolution is lower than monitor ratio
(16:9).
Exit : Exit,    : Move
: Select another sub-menu
: Restart to select sub-menu