LG Flatron W1954se Users Guide

							A20
On Screen Display(OSD) Selection and Adjustment 
Icons
Menu Name
Sub-menu Name
Main menu Sub menu Description
MOVIEINTERNET
NORMAL
DEMO
USER
The OSD screen will appear when you touch the                   button on the right bottom of
the monitor.
INTERNET: For text images (Word processing etc.)
MOVIE: For animation images in videos or movies 
This is under normal operating conditions.
This is just for advertising to customer in the
shops. It’s setting is same with Movie mode and
screen is divided by half.
This feature lets you easily select the best desired
image condition optimized to the environment
(ambient illumination, image types etc).
User
You can manually adjust ACE or RCM.  
You can save or restore the adjusted value even 
when using a different environment. 
...ACE(Adaptive Clarity Enhancer): Selects the clarity mode....RCM(Real Color Management): Selects the color mode.
Not applied
Green enhance 
Flesh tone
Color Enhance0
1
2
3
To adjust the USER sub-menu
function,press the AUTO/SET Button.
MENU: Exit
,     : Move
MENU: Exit
: Decrease
: Increase
SET    : Select another sub-menu
 
						

							A21
Troubleshooting
No image appears
Check the following before calling for service.
No image appears
Do you see a OSD LOCKED message on the screen?
Is the power cord of the
display connected?
Is the power indicator
light on?
Is the power indicator
flickering?
Do you see an OUT OF
RANGE message on
the screen?
Do you see a CHECK
SIGNAL CABLE
message on the
screen?• Check and see if the power cord is connected
properly to the power outlet.
• Press the Power button.
• If the display is in power saving mode, try moving
the mouse or pressing any key on the keyboard to
bring up the screen.
• Try to turn on the PC.
• This message appears when the signal from the
PC (video card) is out of horizontal or vertical
frequency range of the display. See the
Specifications section of this manual and
configure your display again.
• This message appears when the signal cable
between your PC and your display is not
connected. Check the signal cable and try again.
• You can secure the current control settings,
so that they cannot be inadvertently changed.
You can unlock the OSD controls at any time
by pushing the MENUbutton for several
seconds: the message 
“OSD UNLOCKED”will appear. Do you see “OSD
LOCKED” when you
push MENU button?
 
						

							A22A22
Troubleshooting
Display image is incorrect
Display Position is
incorrect.
On the screen
background, vertical
bars or stripes are
visible.
Any horizontal noise
appearing in any
image or characters
are not clearly
portrayed.• Press the AUTO/SETbutton to automatically
adjust your display image to the ideal setting. 
If the results are unsatisfactory, adjust the image
position using the H position and V positionicon
in the on screen display.
• Press the AUTO/SETbutton to automatically
adjust your display image to the ideal setting.
If the results are unsatisfactory, decrease the
vertical bars or stripes using the CLOCKicon in
the on screen display.
• Press the AUTO/SETbutton to automatically
adjust your display image to the ideal setting.
If the results are unsatisfactory, decrease the 
horizontal bars using the PHASEicon in the on 
screen display.
• Check Control Panel --> Display --> Settings
and adjust the display to the recommended
resolution or adjust the display image to the ideal
setting. Set the color setting higher than 24 bits
(true color).
Important
Check Control Panel --> Display --> Settingsand see if the frequency or the
resolution were changed. If yes, readjust the video card to the recommend
resolution.
If the recommended resolution (optimal resolution) is not selected, letters may
be blurred and the screen may be dimmed, truncated or biased. Make sure to
select the recommend resolution.
The setting method can differ by computer and O/S (Operation System), 
and resolution mentioned above may not be supported by the video card    
performance. In this case, please ask to the computer or the video card  
manufacturer
. 
 
						

							A23
Display image is incorrect
The screen color is
mono or abnormal.

The screen blinks.
• Check if the signal cable is properly connected
and use a screwdriver to fasten if necessary.
•Make sure the video card is properly inserted in   
the slot.
•Set the color setting higher than 24 bits (true color)
atControl Panel -Settings.
•Check if the screen is set to interlace mode and if
yes,change it to the recommend resolution.
Troubleshooting
Do you see an Unrecognized monitor, Plug&Play (VESA
DDC) monitor found message?
Have you installed the
display driver?• Be sure to install the display driver from the display
driver CD (or diskette) that comes with your
display. Or, you can also download the driver from
our web site: http://www.lge.com.
• Make sure to check if the video card supports
Plug&Play function.
 
						

							A24A24
Specifications W1954SE
NOTEInformation in this document is subject to change without notice.
Display 
Sync Input 
Video Input 
Resolution 
Plug&Play 
Power 
Consumption 
Dimensions& Weight
Tilt Range 
Power Input 
Environmental 
Conditions 
Stand Base 
Power cord 19 inches (48.1 cm) Flat Panel Active matrix-TFT LCD  
Anti-Glare coating 
Visible diagonal size: 48.1 cm
0.285*0.285 mm pixel pitch
Horizontal Freq. 30 - 83 kHz (Automatic) Vertical Freq. 56 - 75 Hz (Automatic)
Input Form Separate TTL, Positive/Negative SOG (Sync On Green) 
Signal Input 15 pin D-Sub Connector 
Input Form RGB Analog (0.7 Vp-p/ 75 ohm) 
Max VESA 1440 x 900 @ 75 Hz 
Recommend VESA 1440 x 900 @ 60 Hz 
DDC 2AB 
On Mode   :
  22 W(Typ.)
Sleep Mode ≤1 W
Off Mode ≤1 W
With Stand Without Stand
Width 45.05 cm / 17.73 inches 45.05 cm / 17.73 inches 
Height 38.09 cm / 14.99 inches 32.68 cm / 12.86 inches  
Depth 18.30 cm /   7.20 inches 6.00 cm /   2.36 inches 
Net 3.33 kg (7.34 lbs) 
Tilt -5˚~ 15˚ 
AC 100-240V~ 50/60Hz 0.8A  
Operating Conditions Temperature 10˚C to 35 ˚C 
Humidity 10 % to 80 % non-Condensing
Storage Conditions Temperature -20˚C to 60 ˚C
Humidity 5 % to 90 % non-Condensing
Attached (     ), Detached ( O ) 
Wall-outlet type or PC-outlet type
 
						

							A25
Specifications
Display Modes (Resolution) Horizontal Freq. (kHz) Vertical Freq. (Hz)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
*15
16640 x 350
720 x 400
640 x 480
640 x 480
800 x 600
800 x 600
832 x 624
1024 x 768
1024 x 768
1152 x 870
1152 x 900
1280 x 1024
1280 x 1024
1440 x 900
1440 x 900
1440 x 90031.469
31.468
31.469
37.500
37.879
46.875
49.725
48.363
60.123
68.681
61.805
63.981
79.976
55.500
55.935
70.63570
70
60
75
60
75
75
60
75
75
65
60
75
60
60
75
Indicator
On Mode
Sleep Mode
Off ModeRed
Flicker
Off
LED Color
MODE
Preset Modes (Resolution)
* Recommend Mode
W1954SE
 
						

							Digitally yours