Home > LG > Monitor > LG Flatron W1942t Users Guide

LG Flatron W1942t Users Guide

    Download as PDF Print this page Share this page

    Have a look at the manual LG Flatron W1942t Users Guide online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 1069 LG manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.

    							Make sure to read the Important Precautionsbefore using the product. 
    Keep the Users Guide(CD) in an accessible place for future reference.
    See the label attached on the product and give the information to your
    dealer when you ask for service.
    W1942TQ
    W2042TQ
    W2242TQ
    User’s Guide
     
    						
    							A1
    This unit has been engineered and manufactured to ensure your personal
    safety, however improper use may result in potential electrical  shock or fire
    hazards. In order to allow the proper operation of all safeguards
    incorporated in this display, observe the following basic rules for its
    installation, use, and servicing.
    On Safety
    Use only the power cord supplied with the unit. In case you use another power
    cord, make sure that it is certified by the applicable national standards if not being
    provided by the supplier. If the power cable is faulty in any way, please contact the
    manufacturer or the nearest authorized repair service provider for a replacement.
    The power supply cord is used as the main disconnection device. Ensure that the
    socket-outlet is easily accessible after installation.
    Operate the display only from a power source indicated in the specifications of
    this manual or listed on the display. If you are not sure what type of power supply
    you have in your home, consult with your dealer.
    Overloaded AC outlets and extension cords are dangerous. So are frayed power
    cords and broken plugs. They may result in a shock or fire hazard. Call your service
    technician for replacement.
    Do not Open the Display.
    There are no user serviceable components inside. 
    There are Dangerous High Voltages inside, even when the power is OFF. 
    Contact your dealer if the display is not operating properly.
    To Avoid Personal Injury :
    Do not place the display on a sloping shelf unless properly secured.
    Use only a stand recommended by the manufacturer.
    Do not drop an object on or apply impact to the product. Do not throw any toys
    or objects on the product screen. 
    It can cause injury to human, problem to product and damage the display.  
    To Prevent Fire or Hazards:
    Always turn the display OFF if you leave the room for more than a short period
    of time. Never leave the display ON when leaving the house.
    Keep children from dropping or pushing objects into the displays cabinet
    openings. Some internal parts carry hazardous voltages.
    Do not add accessories that have not been designed for this display.
    When the display is to be left unattended for an extended period of time, unplug
    it from the wall outlet.
    In the presence of thunder and lightning, never touch the power cord and signal
    cable because it can be very dangerous. It can cause electric shock. 
    Important Precautions
     
    						
    							A2
    Important Precautions
    On Installation
    Do not allow anything to rest upon or roll over the power cord, and do not place the
    display where the power cord is subject to damage.
    Do not use this display near water such as near a bathtub, washbowl, kitchen sink,
    laundry tub, in a wet basement, or near a swimming pool.
    Displays are provided with ventilation openings in the cabinet to allow the release of
    heat generated during operation. If these openings are blocked, built-up heat can
    cause failures which may result in a fire hazard. Therefore, NEVER:
    Block the bottom ventilation slots by placing the display on a bed, sofa, rug, etc.
    Place the display in a built-in enclosure unless proper ventilation is provided.
    Cover the openings with cloth or other material.
    Place the display near or over a radiator or heat source.
    Main power breaker is the power cord and this breaking device must be located at
    a location where it is easy to operate.  
    Do not rub or strike the Active Matrix LCD with anything hard as this may scratch,
    mar, or damage the Active Matrix LCD permanently.
    Do not press the LCD screen with your finger for a long time as this may cause
    some afterimages.
    Some dot defects may appear as Red, Green or Blue spots on the screen.
    However, this will have no impact or effect on the display performance. 
    If possible, use the recommended resolution to obtain the best image quality for
    your LCD display. If used under any mode except the recommended resolution,
    some scaled or processed images may appear on the screen. However, this is
    characteristic of the fixed-resolution LCD panel.
    Leaving a fixed image on the screen for a long time may cause damage to the
    screen and cause image burn-in. Make sure to use a screen saver on the product. 
    Burn-in and related problems are not covered by the warranty on this product. 
    On Cleaning
    Unplug the display before cleaning the face of the display screen.
    Use a slightly damp (not wet) cloth. Do not use an aerosol directly on the display
    screen because over-spraying may cause electrical shock.
    On Repacking
    Do not throw away the carton and packing materials. They make an ideal
    container in which to transport the unit. When shipping the unit to another
    location, repack it in its original material.
    On Disposal
    The fluorescent lamp used in this product contains a small amount of mercury.
    Do not dispose of this product with general household waste.
    Disposal of this product must be carried out in accordance to the regulations of
    your local authority.
     
    						
    							A3
    Connecting the Display
    Important
    This illustration depicts the general model of connection. Your monitor may differ from
    the items shown in the picture.
    Do not carry the product upside down holding only the stand base. The product may
    fall and get damaged or injure your foot.
    Before setting up the monitor, ensure that the power to the monitor, the computer
    system, and other attached devices is turned off.
    Connecting the stand 
    1.Place the monitor with its front facing downward on a soft cloth.
    2.Assemble the Stand Body into the product in the correct direction as shown in the picture. 
    Make sure you push it until you hear it “click”.
    3.Assemble the Stand Base(Front, Rear) into the Stand Body in the correct direction.
    4.Tie down the base lock to perpendicularity direction.
    5.Once assembled take the monitor up carefully and face
    the front side
    Stand Body
    Stand BaseStand Body Hinge Body
     
    						
    							A4
    Connecting the Display
    Disassembling the stand
    1.Put a cushion or soft cloth on aflat
    surface.
    3.Change your lock on the product as it follows and turn it in the arrow direction.
    2.Place the monitor face Down on
    the cushion or soft cloth.
    If you cant release the stand base even the locking knob is at a release
    position, Please push the indicated knob down and retry it.
    4.Pull out the Stand to remove.
     
    						
    							A5
    Connecting the Display
    Before setting up the monitor, ensure that the power to the monitor, the computer
    system, and other attached devices is turned off. 
    Positioning your display
    1.Adjust the position of the panel in various ways for maximum comfort.
    Tilt Range : -5˚~20˚                            
    Ergonomic
    It is recommended that in order to maintain an ergonomic and comfortable viewing
    position, the forward tilt angle of the monitor should not exceed 5 degrees.
    5.Pushing the PUSH button, Take the stand base from stand body.
    Good Position Bad Position
    Warning:
    You can hurt your finger.
     
    						
    							A6
    Using the Computer
    1.Make sure to turn off the computer and  product. Connect the cable as below sketch map
    form to .1
    2.Press        button on the front switch panel to turn the 
    power on. When monitor power is turned on, the 
    Self Image Setting Function is executed automatically.
    (Only Analog Mode)
    2
    Connecting the Display
    PUSH
    PC
    PC
    B
    MACc
    PCA
    Wall-outlet type
    Power CordAnalog signal
    D-subDigital signal
    DVI
    A
    B
    C
    Connect DVI Cable
    Connect Dsub Cable (PC)
    Connect Dsub Cable (Mac)
    PC-outlet type
    Mac adapterFor Apple Macintosh use, a  separate plug adapter is
    needed to change the 15 pin high density (3 row) D-
    sub VGA connector on the supplied cable to a 15 pin
    2 row connector.
    DVI-D(This feature is not available in all countries.)
    NOTE‘ Self Image Setting Function’? This function provides the user with optimal display settings.When the user
    connects the monitor for the first time, this function automatically adjusts the display to optimal settings for individual
    input signals. 
    ‘AUTO/SET’ Function? When you encounter problems such as blurry screen, blurred letters, screen flicker or tilted
    screen while using the device or after changing screen resolution, press the AUTO/SET function button to improve
    resolution. 
    NOTEThis is a simplified representation of the rear view.
    This rear view represents a general model; your display may differ from the view as
    shown.
    User must use shielded signal interface cables (D-sub 15 pin cable, DVI cable) with
    ferrite cores to maintain standard compliance for the product. 
     
    						
    							Control Function
    A7
    Control Panel Functions
    MENU ButtonUse this button to enter or exit the On Screen Display.
    OSD LOCKED/UNLOCKED
    This function allows you to lock the current control
    settings, so that they cannot be inadvertently changed.
    Press and hold the MENU buttonfor several seconds.
    The message OSD LOCKEDshould appear.
    You can unlock the OSD controls at any time by pushing
    the MENU buttonfor several seconds. The message
    OSD UNLOCKEDshould appear.
    Front Panel Controls
    4:3 in WideTo select the image size of the screen.
    WIDE4:3
    • WIDE : Switch to full screen mode according to input 
    image signal.  
    • 4 : 3: Change the image signal ratio into 4:3. 
     
    						
    							Control Function
    A8
    Control Panel Functions
    This Indicator lights up blue when the display
    operates normally(On Mode). If the display is in Sleep
    Mode (Energy Saving), this indicator color changes 
    to amber. Use this button to turn the display on or off.
    Power Button
    Power Indicator
    Use this button to enter a selection in the On Screen 
    Display.AUTO/SET
    Button
    AUTO IMAGE ADJUSTMENT
    When adjusting your display settings, always press
    the AUTO/SETbutton before entering the On Screen
    Display(OSD). This will automatically adjust your
    display image to the ideal settings for the current
    screen resolution size (display mode).
    The best display mode is
    -W1942TQ : 1440 x 900
    -W2042TQ/W2242TQ : 1680 x 1050
    ButtonsUse these buttons to select or adjust functions in the
    On Screen Display.
    For more information, refer to page A15.
    Use this button to make D-Sub or DVI connector
    active. This feature is used when two computers are
    connected to the display. The default setting is D-Sub.
     
    						
    							A9
    On Screen Display (OSD) Control Adjustment
    Screen Adjustment
    Making adjustments to the image size, position and operating parameters of
    the display is quick and easy with the On Screen Display Control system. 
    A short example is given below to familiarize you with the use of the controls.
    The following section is an outline of the available adjustments and selections
    you can make using the OSD.
    To make adjustments in the On Screen Display, follow these steps:
    Press the MENU Button, then the main menu of the OSD appears.
    To access a control, use the      or      Buttons. When the icon you want
    becomes highlighted, press the AUTO/SET Button.
    Use the   /      Buttons to adjust the image to the desired level. Use the
    AUTO/SET Button to select other sub-menu items.
    Push the MENU Buttononce to return to the main menu to select another
    function. Push the MENU Buttontwice to exit from the OSD.
    NOTE
    Allow the display to stabilize for at least 30 minutes before making image adjustments.
    AUTO/SET
    MENU MENU
     
    						
    All LG manuals Comments (0)

    Related Manuals for LG Flatron W1942t Users Guide