LG Flatron W1942s Users Guide

A10
NOTEThe order of icons may differ depending on the model (A10~A15).
On Screen Display(OSD) Selection and Adjustment 
The following table indicates all the On Screen Display control, adjustment,
and setting menus.
To adjust the brightness,
contrast and gamma of the
screenPICTURE
COLOR
TRACKING
SETUP 

Main menu Sub-menu     A                      Reference
PRESET
RED
GREEN
BLUE
To adjust the position of the
screen To customize the color of
the screen
To customize the screen
status for a user's...

A11
On Screen Display(OSD) Selection and Adjustment 
NOTEOSD (On Screen Display) menu languages on the monitor may differ from \
the manual.
You were introduced to the procedure of selecting and adjusting an item
using the OSD system.  Listed below are the icons, icon names, and icon
descriptions of the all items shown on the Menu.
Press the MENU Button, then the main menu of the OSD appears.
Sub-menus
Menu NameIcons
Main Menu
Button Tip

MENU        : Exit
-+ : Adjust (Decrease/Increase)
SET        :...

A12
On Screen Display(OSD) Selection and Adjustment 
Main menu Sub menu Description
BRIGHTNESS
CONTRAST 
GAMMA
To adjust the brightness of the screen. 
To adjust the contrast of the screen.
Set your own gamma value. : -50/0/50
On the monitor, high gamma values
display whitish images and low gamma
values display high contrast images.

PICTURE
PRESET
RED
GREEN
BLUESelect the screen color.  • sRGB: Set the screen color to fit the SRGB standard color
specification.
• 6500K: Slightly reddish white.
• 9300K:...

A13
MENU: Exit
: Decrease
: Increase
SET     : Select another 
sub-menu
On Screen Display(OSD) Selection and Adjustment 
Main menu Sub menu Description
CLOCK
PHASE
SHARPNESS
To minimize any vertical bars or stripes
visible on the screen background.
The horizontal screen size will also
change.
To adjust the focus of the display. 
This item allows you to remove any
horizontal noise and clear or sharpen
the image of characters.
To adjust the clearness of the screen.

-
+

HORIZONTAL
VERTICALTo move image...

A14
On Screen Display(OSD) Selection and Adjustment 
SETUP
SETUP

MENU: Exit
: Adjust
: Adjust
SET     : Select another
sub-menu
-+
If this does not improve the screen image, restore the factory default s\
ettings. 
If necessary, perform the white balance function again. This function wi\
ll be enabled only
when the input signal is an analog signal. 
To choose the language in which the
control names are displayed.
To adjust position of the OSD window
on the screen.LANGUAGE
OSD
POSITION
WHITE
BALANCE...

A15
On Screen Display(OSD) Selection and Adjustment 
Icons
Menu Name
Sub-menu Name
Main menu Sub menu Description
MOVIEINTERNET
NORMAL
DEMO
USER

The OSD screen will appear when you touch the                         bu\
tton on the  left side of the monitor.
INTERNET: For text images (Word processing etc.)
Select the           sub-menu using the  AUTO/SET
button and save the  YESvalue using the      ,  
buttons .
MOVIE
: For animation images in videos or movies 
This is under normal operating...

A16
Troubleshooting

No image appears
Check the following before calling for service.

No image appears

Do you see a OSD LOCKED message on the screen?
●Is the power cord of the
display connected?
● Is the power on and the
power indicator blue or
green?
● Is the power indicator
amber?
● Do you see an "OUT OF
RANGE" message on
the screen?
● Do you see a "CHECK
SIGNAL CABLE"
message on the
screen?• Check and see if the power cord is connected
properly to the power outlet.
• Adjust the...

A17
Troubleshooting

Display image is incorrect
●Display Position is
incorrect.
● On the screen
background, vertical
bars or stripes are
visible.
● Any horizontal noise
appearing in any
image or characters
are not clearly
portrayed.• Press the  AUTO/SET button to automatically
adjust your display image to the ideal setting. 
If the results are unsatisfactory, adjust the image
position using the  H position and V position icon
in the on screen display.
• Press the  AUTO/SET button to automatically
adjust...

A18
Troubleshooting

Have you installed the display driver?
●Have you installed thedisplay driver?
●Do you see an"Unrecognized monitor,
Plug&Play (VESA DDC)
monitor found"
message?
• Be sure to install the display driver from the display
driver CD (or diskette) that comes with your
display. Or, you can also download the driver from
our web site: http://www.lge.com.
• Make sure to check if the video card supports
Plug&Play function.

Display image is incorrect
● The screen color is
mono or...

A19A19

Specifications                                                          \
            W1942S
NOTEInformation in this document is subject to change without notice.
Display
Sync Input
Video Input
Resolution
Plug&Play
Power
Consumption
Dimensions& Weight
Tilt Range
Power Input
Environmental
Conditions
Stand Base
Power cord 19 inches (48.14 cm) Flat Panel Active matrix-TFT LCD 
Anti-Glare coating 
19 inches viewable
0.285*0.285 mm pixel pitch
Horizontal Freq.
      28 - 83 kHz (Automatic)...