LG Flatron M2794dp Pz Owners Manual

20
EXTERNAL EQUIPMENT SETUP
SCREEN SETUP FOR PC MODE
Returns Position, Size and Phase to the default factory settings.
This function works in the following mode: RGB[PC].
Screen Reset
1
Select PICTURE.
2
Select SCREEN.
3
Select Reset.
5
Run Reset.
To   S e t
Auto Config.
SCREENMove
Prev.RETURN
Resolution
Position
Size
Phase
ResetG
MENU
OK 
OK 
OK 
4
Select Ye s.OK 
• Press the MENUor EXITbutton to close the menu window.
• Press the RETURN button to move to the previous menu screen.
• Contrast10 0
•...

21
EXTERNAL EQUIPMENT SETUP
If the picture is not clear after auto adjustment and especially if characters are still shaky, adjust the pic-
ture phase manually.
This function works in the following mode: RGB[PC].
Adjustment for screen Position, Size, Phase
1
Select PICTURE.
2
Select SCREEN.
3
Select Position, Size or Phase.
4
Make appropriate adjustments.
Auto Config.
SCREENMove
Resolution
PositionG
Size
Phase
Reset
G FD
E
MENU
OK 
OK 
• Press the MENUor EXITbutton to close the menu window.
• Press the...

22
EXTERNAL EQUIPMENT SETUP
To view a normal picture, match the resolution of RGB mode and selection of PC mode.
This function works in the following mode: RGB[PC] mode.
Selecting Resolution
1
Select PICTURE.
2
Select SCREEN.
3
Select Resolution.
4
Select the desired resolution.
MENU
OK 
OK 
• Press the MENUor EXITbutton to close the menu window.
• Press the RETURN button to move to the previous menu screen.
1400 x 1050
1680 x 1050
Auto Config.
SCREENMove
ResolutionG
Position
Size
Phase
Reset...

23
EXTERNAL EQUIPMENT SETUP
1
Automatically adjusts picture position and minimizes image instability. After adjustment, if the image is still
not correct, your set is functioning properly but needs further adjustment.
A Au
ut
to
o 
 c
co
on
nf
fi
ig
gu
ur
re
e
This function is for automatic adjustment of the screen position, clock, and phase The displayed image will
be unstable for a few seconds while the auto configuration is in progress.
Auto Configure (RGB [PC] mode only)
•If  the  position  of  the...

24
EXTERNAL EQUIPMENT SETUP
• Press the MENUor EXITbutton to close the menu window.
• Press the RETURN button to move to the previous menu screen.
DDC/CI (Display Data Channel Command Interface) is a communication protocol for communications between
PC and set.
DDC/CI makes it possible to adjust and setup detailed functions on PC instead of the set OSD
Set can be adjusted with PC by connecting communication between PC and set when DDC/CI is ON, and set
cannot be adjusted with PC because communication...

25
WATCHING TV /PROGRAMME CONTROL
REMOTE CONTROL KEY FUNCTIONS
When using the remote control, aim it at the remote control sensor on the set.
OK 
MENU EXIT
GUIDE
123
456
789
0
Q.VIEWLIST
TV/PC INPUTPOWER
VOL PR
I/IIMUTETEXT
RETURN
FAV
INFO   i
TV/RADIO
*
Q.MENUT.OPT MARKSUBTITLE
POWER
TV/PC
INPUTSwitches the set on off.
Selects TV or PC mode.
Switches the set on.
External input mode rotates in regular sequence.
Switches the set on.
TV/RADIO
I/II
MUTESelects Radio or TV channel.
Selects the sound...

26
WATCHING TV /PROGRAMME CONTROL
Installing Batteries
Open the battery compartment cover on the back and install the
batteries matching correct polarity (
+ with +, - with -)
.
Install two 1.5V AAA batteries. Don’t mix old or used batteries with
new ones.
Close cover.
USB Menu  
control buttonsControls USB menu
(Photo List and Music 
List)
TELETEXT
BUTTONSThese buttons are used for teletext.
For further details, see the ‘Teletext’ section.
(Refer to the p.92~94)1
2
3Q.MENU
MARKSelect the desired...

27
OK 
MENU EXIT
GUIDE
123
456
789
0
Q.VIEWLIST
TV/PC INPUTPOWER
VOL PR
I/IIMUTETEXT
RETURN
FAV
INFO   i
TV/RADIO
*
Q.MENUT.OPT MARKSUBTITLE
WATCHING TV /PROGRAMME CONTROL
TURNING ON THE TV
- If your TV is turned on, you will be able to use its features.
First, connect power cord correctly. 
Turn on power by pressing the power button on the product.
Press the TV/PC button on the remote control.
Set the channel by using the PR+ / - buttons or number
buttons on the remote control. 
2
1
Initializing setup...

28
WATCHING TV /PROGRAMME CONTROL
OK 
MENU EXIT
GUIDE
123
456
789
0
Q.VIEWLIST
TV/PC INPUTPOWER
VOL PR
I/IIMUTETEXT
RETURN
FAV
INFO   i
TV/RADIO
*
Q.MENUT.OPT MARKSUBTITLE
PROGRAMME SELECTION
Press the P PR
R 
 +
+ 
 
or- -
or NUMBERbuttons to select a pro-
gramme number.1
VOLUME ADJUSTMENT
Press the VO L+ + 
 
or- -
button to adjust the volume.
If you want to switch the sound off, press the MUTE
button. 
You can cancel this function by pressing the MUTE, 
VO L+ + 
 
or- -
, or I/IIbutton.1...

29
WATCHING TV /PROGRAMME CONTROL
• Press the RETURN button to move to the previous menu screen.
• A
As
sp
pe
ec
ct
t 
 R
Ra
at
ti
io
o
: Selects your desired picture format.
For  Zoom  Setting,  select  14:9,  Zoom  and  Cinema
Zoom in Ratio Menu.  After  completing  Zoom  Setting,
the display goes back to Q.Menu.
• P Pi
ic
ct
tu
ur
re
e 
 M
Mo
od
de
e
: Selects your desired Picture Mode.
• S So
ou
un
nd
d 
 M
Mo
od
de
e
: It is a feature to automatically set the
sound  combination  which  it  deems...