LG Flatron M2794a Owners Manual

							10
EXTERNAL EQUIPMENT SETUP
When connecting with a HDMI
Connect  the  HDMI  output  of  the  digital  set-top  box  to  the
H HD
DM
MI
I 
 
jack on the set.
Press the INPUT button to select HDMI1 or HDMI2.1
2
Connect  the  digital  set-top  box  to H HD
DM
MI
I 
 
jack  on  the
set.
Connect  the  audio  output  of  the  digital  set-top  box  to
the A AU
UD
DI
IO
O 
 I
IN
N 
 (
(R
RG
GB
B/
/D
DV
VI
I)
) 
 
jack on the set.
Turn on the digital set-top box. (
Refer to the owner’s
manual for the digital set-top box.)
Press the INPUT button to select HDMI1 or HDMI2.
2
3
4
1
When connecting with a HDMI to DVI cable
HDMI1
2
1
DVI OUTPUTAUDIO
R
L
A
U
D
IO
 IN
(R
G
B
/D
VI)HDMI1
2
12
NOTE!
G GHDMI Input does not support PC mode. If it is connected PC, the screen may not be displayed properly.
G
GHDMI support PCM audio format only.
Signal
480i/576i
480p/576p
720p/1080i
1080pHDMI
No
Ye s
Ye s
Ye s
“ownloadedlfroml:anual:onitor-coml:anuals 
						

							11
EXTERNAL EQUIPMENT SETUP
DVD SETUP
When connecting with a component cable
Component Input ports
To get better picture quality, connect a DVD player to the component input ports as shown below.
Component ports on the set
YPBPR
Video output ports 
on DVD player
Y
Y
Y
YPB
B-Y
Cb
PbP
R
R-Y
Cr
Pr
Connect  the  video  output  sockets  (Y  PBPR)  of  the  DVD  to
the C CO
OM
MP
PO
ON
NE
EN
NT
T 
 I
IN
N 
 V
VI
ID
DE
EO
O 
 
sockets (Y P
BPR) of the set.
Connect  the  audio  cable  from  the  DVD  to C CO
OM
MP
PO
ON
NE
EN
NT
T
I IN
N 
 A
AU
UD
DI
IO
O 
 
sockets of the set.
Press the I IN
NP
PU
UT
T
button to select 
C Co
om
mp
po
on
ne
en
nt
t.
Press the P PL
LA
AY
Y
button on the DVD.
The DVD playback picture appears on the screen.
2
3
4
1
VIDEO
COMPONENT
IN
AUDIO
Y
PB
PR
L
R
1
2
vownloadedyfromy;anual;onitorkcomy;anuals 
						

							12
EXTERNAL EQUIPMENT SETUP
When connecting HDMI cable
Connect  the  HDMI  output  of  the  DVD  to  the H HD
DM
MI
I
jack on the set.
Press the INPUT button to select HDMI1 or HDMI2.
G GSet can receive the video and audio signal simultaneously by using a HDMI cable.
G
GIf the DVD player does not support Auto HDMI, you need to set the DVD output resolution appropriately.
G
GHDMI support PCM audio format only.
NOTE!
HDMI1
2
1
1
2
•ownloadedhfromhQanualQonitoricomhQanuals 
						

							13
EXTERNAL EQUIPMENT SETUP
VCR SETUP
To avoid picture noise (interference), leave an adequate distance between the VCR and set.
Typically a still picture is shown on the VCR. If a user uses 4:3 picture format for a long time, an afterimage
may remain on the sides of the screen.
OUTPUT
SWITCH ANT IN
RS-VIDEO VIDEO
ANT OUTLANTENNA IN/
CABLE IN
Wall Jack
Antenna
1
2
When connecting with an antenna
Connect the RF out socket of the VCR to the aerial socket of the set.
Connect the aerial cable to the RF ANT IN socket of the VCR.
Store the VCR channel on a desired programme number using the ‘Manual
programme tuning’ section.
Select the programme number where the VCR channel is stored.
Press theP PL
LA
AY
Y 
 
button on the VCR.1
2
3
4
5
•ownloadedhfromhQanualQonitoricomhQanuals 
						

							14
EXTERNAL EQUIPMENT SETUP
When connecting with a RCA cable
Connect  the  audio/video  out  sockets  of  the  VCR  to
AUDIO/VIDEO in sockets of the set.
Press the INPUT button to select AV.
Press the PLAY button on the VCR.
The VCR playback picture appears on the screen.
2
3
1
When connecting with an S-Video cable
Connect  the  S-Video  socket  of  the  VCR  to  the  S-
VIDEO socket of the set.
Connect the audio cable from the S-VIDEO VCR to the
AUDIO sockets of the set.
Press the INPUT button to select AV.
Press the PLAY button on the VCR.
The VCR playback picture appears on the screen.
2
3
4
1
NOTE!
G GIf you have a mono VCR, connect the audio cable from the VCR to the AUDIO L/MONO jack of the set.
VIDEO ANT IN
ANT OUT S-VIDEO
L
R
VIDEO AUDIO
(MONO)
S-VIDEO
L
R
AV IN
1
VIDEO AUDIO
(MONO)
S-VIDEO
L
R
AV IN
VIDEO ANT IN
ANT OUT
OUTPUT
SWITCH
3 4
S-VIDEO
L
R1
2
 
						

							15
EXTERNAL EQUIPMENT SETUP
PC SETUP
This product provides Plug and Play capability, meaning that the PC adjusts automatically to the set's settings. 
When connecting with a D-sub 15 pin cable
4
Connect  the  signal  cable  from  the  RGB  output  socket  of  the
PERSONAL COMPUTER to the RGB IN(PC) of the set.
Connect the audio cable from the PC to the A AU
UD
DI
IO
O 
 I
IN
N
( (R
RG
GB
B/
/D
DV
VI
I)
)
jack of the set.
Press the INPUT button to select RGB PC.
Switch on the PC, and the PC screen appears on the set.
The set can be operated as a PC monitor.2
3
1
RGB OUTPUTAUDIO
AUDIO IN
(RGB/DVI)
RGB IN (PC)
12
NOTE!
G G 
 You  must  use  shielded  signal  interface  cables  (D  sub  15  pin  cable,  DVI  cable)  with  ferrite  cores  to  main-
tain standard compliance for the product.
“ownloadedlfroml:anual:onitor-coml:anuals 
						

							16
EXTERNAL EQUIPMENT SETUP
When connecting with a DVI cable
Connect  the  DVI  output  of  the  PC  to  the D DV
VI
I-
-D
D 
 I
IN
N
jack on the set.
Connect  the  audio  cable  from  the  PC  to  the A AU
UD
DI
IO
O
I IN
N 
 (
(R
RG
GB
B/
/D
DV
VI
I)
)
jack of the set.
2
1
NOTE!
G GIf  the  set  is  cold,  there  may  be  a  small  “flicker”
when the set is switched on. This is normal, there
is nothing wrong with the set.
G GIf  possible,  use  the  1920x1080@60Hz  video
mode  to  obtain  the  best  image  quality  for  your
LCD monitor. If used with other resolutions, some
scaled  or  processed  pictures  may  appear  on  the
screen. The set has been preadjusted to the mode
1920x1080@60Hz.
G GSome dot defects may appear on the screen, like
Red,  Green  or  Blue  spots.  However,  this  will  have
no impact or effect on the monitor performance.
G GDo not press the LCD screen with your finger for
a long time as this may produce some temporary
distortion effects on the screen.
G G 
 Avoid  keeping  a  fixed  image  on  the  set’s  screen
for  prolonged  periods  of  time.  The  fixed  image
may  become  permanently  imprinted  on  the
screen; use a screen saver when possible.
AUDIO
DVI OUTPUT
AUDIO IN
(RGB/DVI)DVI-D IN (PC)
12
vownloadedyfromy;anual;onitorkcomy;anuals 
						

							17
EXTERNAL EQUIPMENT SETUP
Tie cables together with a cable tie as shown in the
illustration.
Cable tie
BACK COVER FOR WIRE ARRANGEMENT
•ownloadedhfromhQanualQonitoricomhQanuals 
						

							18
EXTERNAL EQUIPMENT SETUP
RGB/DVI[PC] 
HDMI[DTV] supported mode
Resolution
640 x 480
800x600720 x 40 0
10 2 4 x 7 6 8Horizontal
Frequency(kHz)Vertical
Frequency(Hz)
70
60
75
60
75
60
75
75
60
75
60
60
60
60 31.468
31.469
37. 50 0
37. 879
46.875
48.363
60.123
67. 50 0
63.981
79.976
64.674
65.290
75.000
66.587 12 8 0 x 10 2 411 5 2 x 8 6 4
1680 x 1050
1920 x 1080 1600x1200
60
60
50
50
60
60
60
60
50
24
30
50
60
60 31.47
31.5
31.25
37. 5
44.96
45
33.72
33.75
28.125
27
33.75
56.25
67. 43
67. 5
Resolution
720x480/60p
720x576/50p
1280x720/60p1280x720/50p
Horizontal
Frequency(kHz)Vertical
Frequency(Hz)
1920x1080/60i
1920x1080/50i
1920 x 1080 / 24 p
1920 x 1080 / 30 p
1920 x 1080 / 50 p
1920 x 1080 / 60 p
“ownloadedlfroml:anual:onitor-coml:anuals 
						

							19
WATCHING TV /PROGRAMME CONTROL
REMOTE CONTROL KEY FUNCTIONS
When using the remote control, aim it at the remote control sensor on the set.
( (D
De
ep
pe
en
nd
ds
s 
 t
th
he
e 
 c
co
ou
un
nt
tr
ry
y 
 t
th
he
e 
 r
re
em
mo
ot
te
e 
 c
co
on
nt
tr
ro
ol
l 
 c
ca
an
n 
 b
be
e 
 p
pr
ro
ov
vi
id
de
ed
d 
 d
di
if
ff
fe
er
re
en
nt
t.
.)
)
OK 
123
456
789
0
Q.VIEWLIST
PR
VOL VOL
PR
TV/PC
MUTE PIP TEXT I/IIINPUTPOWER
OK 
123
456
789
0
Q.VIEWLIST
PR
VOL VOL
PR
TV/PC
MUTE PIP FAV I/IIINPUTPOWER
TV/PC
POWER
INPUT A A 
 T
TY
YP
PE
E
B B 
 T
TY
YP
PE
ESelects TV or PC mode.
Switches the set on.
Switches the set on or off.
External input mode rotates in regular sequence.
Switches the set on.
MUTE
PIP
TELETEXT
BUTTONS
FAV
I/IISwitches the sound on or off.
Switches the sub picture PIP, DW mode.
(Refer to the p.29)
These buttons are used for teletext.
For further details, see the ‘Teletext’ section. (Refer to
the p.51-53)
Scroll through the programmed Favorite programme.
(Refer to the p.27)
Selects the sound output.(Refer to the p.44)
0~9 number
button
LIST
Q.VIEWSelects a programme.
Selects numbered items in a menu.
Displays the programme table.(Refer to the p.28)
Returns to the previously viewed programme.
VOLUME UP
/DOWN
Programme
UP/DOWN
OK ButtonAdjusts the volume.
Selects a programme.
Accepts your selection or displays the current mode.
Double press the OK button, then Auto Config. ( (O
On
nl
ly
y
R RG
GB
B-
-P
PC
C 
 i
in
np
pu
ut
t)
)
1
2
3
4
1
2
3
4
1
2
3
4