LG Flatron M2762d Owners Manual
Here you can view all the pages of manual LG Flatron M2762d Owners Manual. The LG manuals for Monitor are available online for free. You can easily download all the documents as PDF.
Page 41
40 PICTURE CONTROL Choose one of two automatic color adjustments. Auto Color Tone Control (6500K/9300K/sRGB)(RGB,DVI mode only) Select PICTURE. 2 Select Advanced Control. 3 Select Color Temperature. 4 Select either 6500K, 9300K, sRGB. 1 Picture Mode : Standard • Backlight 80 • Contrast 100 • Brightness 50 • Sharpness 70 • Color 50 • Tint 0 • Advanced Control PICTUREMoveEnter E D• Advanced Control MENU ENTER ENTER • Press the MENU button to close the menu window. • Press the RETURN button to move to the...
Page 42
41 MANUAL PICTURE ADJUSTMENT Picture Mode-User option NOTE! G You cannot adjust color, sharpness and tint in the RGB, DVI mode.Select PICTURE. 2 Select Picture Mode. 4 Select Backlight, Contrast, Brightness, Sharpness, Color or Tint. 5 Make appropriate adjustments. 1 3 Select desired picture value. MENU ENTER ENTER ENTER ENTER • Press the MENU button to close the menu window. • Press the RETURN button to move to the previous menu screen. PICTURE CONTROL Aspect Ratio : 16:9 Auto Bright : Off Picture Mode...
Page 43
42 PICTURE CONTROL Picture Mode : Vivid • Backlight 100 • Contrast 100 • Brightness 50 • Sharpness 70 • Color 70 • Tint 0 • Advanced Control PICTUREMoveEnter E D• Advanced Control Fresh Contrast Optimizes the contrast automatically according to the brightness of the reflection. Fresh Color Adjusts the color of the reflection automatically to reproduce natural colors as close as possible. Noise Reduction Removes interference up to the point where it does not damage the original picture. GammaHigh gamma...
Page 44
43 ADVANCED - BLACK (DARKNESS) LEVEL When you view a film, this function adjusts the set to the best picture quality. This function works in the following mode: ATV, AV(NTSC-M), Component, HDMI Select PICTURE. 2 Select Advanced Control. 3 Select Black Level. 4 Select Lowor High. 1 Picture Mode : Vivid • Backlight 100 • Contrast 100 • Brightness 50 • Sharpness 70 • Color 70 • Tint 0 • Advanced Control PICTUREMoveEnter E D• Advanced Control • L Lo ow w: : The reflection of the screen gets darker. • H Hi...
Page 45
44 PICTURE CONTROL Select PICTURE. 2 Select Advanced Control. 3 Select Film Mode. 4 Select On or Off. 1 Picture Mode : Vivid • Backlight 100 • Contrast 100 • Brightness 50 • Sharpness 70 • Color 70 • Tint 0 • Advanced Control PICTUREMoveEnter E D• Advanced Control ADVANCED - FILM MODE To set the product up for the best picture quality for viewing films. This feature operates only in TV, AV and Component 480i/1080i , HDMI 1080i mode. MENU ENTER ENTER • Press the MENU button to close the menu window. •...
Page 46
45 PICTURE CONTROL PICTURE RESET Settings of the selected picture modes return to the default factory settings. Select PICTURE. 2 Select Picture Reset. 3 Initialize the adjusted value. 1 • Backlight 100 • Contrast 100 • Brightness 50 • Sharpness 70 • Color 70 • Tint 0 • Advanced Control PICTUREMoveEnterD • Reset MENU ENTER ENTER RG • Backlight 100 • Contrast 100 • Brightness 50 • Sharpness 70 • Color 70 • Tint 0 • Advanced Control PICTUREMoveEnterD • Reset RG Resetting video configuration...i i • Press...
Page 47
![Page 47
46
PICTURE CONTROL
To view a normal picture, set the resolution to match what the PC is using.
This function works in the following resolution in RGB[PC] mode.
Selecting Resolution
1
Select PICTURE.
2
Select SCREEN(RGB-PC).
3
Select Resolution.
4
Select the desired resolution.
MENU
ENTER
ENTER
• Press the MENU button to close the menu window.
• Press the RETURN button to move to the previous menu screen.
1024 x 768
1280 x 768
1360 x 768
1366 x 768
Auto Config.
SCREENMove
ResolutionG
Position
Size
Phase...](http://img.usermanuals.tech/thumb/47/52124/w300_lg_flatron_m2762d-owner-s-manual-46.png "Page 47
46
PICTURE CONTROL
To view a normal picture, set the resolution to match what the PC is using.
This function works in the following resolution in RGB[PC] mode.
Selecting Resolution
1
Select PICTURE.
2
Select SCREEN(RGB-PC).
3
Select Resolution.
4
Select the desired resolution.
MENU
ENTER
ENTER
• Press the MENU button to close the menu window.
• Press the RETURN button to move to the previous menu screen.
1024 x 768
1280 x 768
1360 x 768
1366 x 768
Auto Config.
SCREENMove
ResolutionG
Position
Size
Phase...")
46 PICTURE CONTROL To view a normal picture, set the resolution to match what the PC is using. This function works in the following resolution in RGB[PC] mode. Selecting Resolution 1 Select PICTURE. 2 Select SCREEN(RGB-PC). 3 Select Resolution. 4 Select the desired resolution. MENU ENTER ENTER • Press the MENU button to close the menu window. • Press the RETURN button to move to the previous menu screen. 1024 x 768 1280 x 768 1360 x 768 1366 x 768 Auto Config. SCREENMove ResolutionG Position Size Phase...
Page 48
![Page 48
47
PICTURE CONTROL
1
Automatically adjusts picture position and minimizes image instability. After adjustment, if the image is still not
correct, your set is functioning properly but needs further adjustment.
A Au
ut
to
o
c
co
on
nf
fi
ig
gu
ur
re
e
This function is for automatic adjustment of the screen position, clock, and phase The displayed image will be
unstable for a few seconds while the auto configuration is in progress.
Auto Configure (RGB [PC] mode only)
•If the position of the image is...](http://img.usermanuals.tech/thumb/47/52124/w300_lg_flatron_m2762d-owner-s-manual-47.png "Page 48
47
PICTURE CONTROL
1
Automatically adjusts picture position and minimizes image instability. After adjustment, if the image is still not
correct, your set is functioning properly but needs further adjustment.
A Au
ut
to
o
c
co
on
nf
fi
ig
gu
ur
re
e
This function is for automatic adjustment of the screen position, clock, and phase The displayed image will be
unstable for a few seconds while the auto configuration is in progress.
Auto Configure (RGB [PC] mode only)
•If the position of the image is...")
47 PICTURE CONTROL 1 Automatically adjusts picture position and minimizes image instability. After adjustment, if the image is still not correct, your set is functioning properly but needs further adjustment. A Au ut to o c co on nf fi ig gu ur re e This function is for automatic adjustment of the screen position, clock, and phase The displayed image will be unstable for a few seconds while the auto configuration is in progress. Auto Configure (RGB [PC] mode only) •If the position of the image is...
Page 49
![Page 49
48
PICTURE CONTROL
If the picture is not clear after auto adjustment and especially if characters are still shaky, adjust the picture
phase manually.
This function works in the following mode: RGB[PC].
Adjustment for screen Position, Size, Phase
1
Select PICTURE.
2
Select SCREEN(RGB-PC).
3
Select Position, Size or Phase.
4
Make appropriate adjustments.
Auto Config.
SCREENMove
Resolution
PositionG
Size
Phase
Reset
G FD
E
MENU
ENTER
ENTER
• Press the MENU button to close the menu window.
• Press the RETURN...](http://img.usermanuals.tech/thumb/47/52124/w300_lg_flatron_m2762d-owner-s-manual-48.png "Page 49
48
PICTURE CONTROL
If the picture is not clear after auto adjustment and especially if characters are still shaky, adjust the picture
phase manually.
This function works in the following mode: RGB[PC].
Adjustment for screen Position, Size, Phase
1
Select PICTURE.
2
Select SCREEN(RGB-PC).
3
Select Position, Size or Phase.
4
Make appropriate adjustments.
Auto Config.
SCREENMove
Resolution
PositionG
Size
Phase
Reset
G FD
E
MENU
ENTER
ENTER
• Press the MENU button to close the menu window.
• Press the RETURN...")
48 PICTURE CONTROL If the picture is not clear after auto adjustment and especially if characters are still shaky, adjust the picture phase manually. This function works in the following mode: RGB[PC]. Adjustment for screen Position, Size, Phase 1 Select PICTURE. 2 Select SCREEN(RGB-PC). 3 Select Position, Size or Phase. 4 Make appropriate adjustments. Auto Config. SCREENMove Resolution PositionG Size Phase Reset G FD E MENU ENTER ENTER • Press the MENU button to close the menu window. • Press the RETURN...
Page 50
![Page 50
49
PICTURE CONTROL
Returns Position, Size and Phase to the default factory settings.
This function works in the following mode: RGB[PC].
Screen Reset
1
MENUSelect PICTURE.
2
Select SCREEN(RGB-PC).
3ENTERSelect Reset.
5ENTERRun Reset.
Initialize Settings.
Auto Config.
SCREENMove
Prev.MENU
Resolution
Position
Size
Phase
ResetG
ENTER
4ENTERSelect Yes.
• Press the MENU button to close the menu window.
• Press the RETURN button to move to the previous menu screen.
• Contrast : 100
• Brightness : 50
•...](http://img.usermanuals.tech/thumb/47/52124/w300_lg_flatron_m2762d-owner-s-manual-49.png "Page 50
49
PICTURE CONTROL
Returns Position, Size and Phase to the default factory settings.
This function works in the following mode: RGB[PC].
Screen Reset
1
MENUSelect PICTURE.
2
Select SCREEN(RGB-PC).
3ENTERSelect Reset.
5ENTERRun Reset.
Initialize Settings.
Auto Config.
SCREENMove
Prev.MENU
Resolution
Position
Size
Phase
ResetG
ENTER
4ENTERSelect Yes.
• Press the MENU button to close the menu window.
• Press the RETURN button to move to the previous menu screen.
• Contrast : 100
• Brightness : 50
•...")
49 PICTURE CONTROL Returns Position, Size and Phase to the default factory settings. This function works in the following mode: RGB[PC]. Screen Reset 1 MENUSelect PICTURE. 2 Select SCREEN(RGB-PC). 3ENTERSelect Reset. 5ENTERRun Reset. Initialize Settings. Auto Config. SCREENMove Prev.MENU Resolution Position Size Phase ResetG ENTER 4ENTERSelect Yes. • Press the MENU button to close the menu window. • Press the RETURN button to move to the previous menu screen. • Contrast : 100 • Brightness : 50 •...