LG Flatron M2350d Owners Manual

							11
ENGENGLISH
REMOTE CONTROL
P
A
G
E
P
1 23
4 5
06
7 8 9
LISTQ\fVIEW
TV / PC INPUT
TV/
RADENERGY
 SA VING
MARK
FAV
RA TIO
MUTE
OK
MENUGUIDEQ.MENU
\fA CKINF O
Aut\b C\bng .
EXIT
Q.MENU (See	p.33)Accesses	the	quick	menus.	
INFO ⓘ
Views	the	information	of	the	currently	program	and	the	screen.	
EXITClears	all	on-screen	displays	and	returns	to	Monitor	set	viewing	from	any	menu.	
Coloured buttonsThese	buttons	are	used	for	teletext	(on	 TELETEXTmodels	only)	,	Programme	edit.
SUBTITLERecalls	your 	preferred 	subtitle	in	digital	mode.
Auto Config.Automatically	adjusts	picture	
position	and	minimizesimage	instability.
MENU	(See	p.46)	Accesses	the	main	menus	or	saves	your	input	and	exit	menus.
Navigation buttons	Scrolls	through	menus	or	options.
OKSelects	menus	or	options	and	confirms	your	input.
BACK Allows 	the 	user 	to 	move 	return	one	step	in	an	interactive	application,	EPG	or	other	user	interaction	function.
Teletext buttons (See 	p.64)These	buttons	are	used	for	teletext.	For	further	details,	see	the	‘Teletext’ 	section.
USB Menu controlbuttons (See	p.36)USB	menu(Photo	List	and	Music	List	or	Movie	List).
P
A
G
EP
1 23
4 5
06
7 8 9
LISTQ\fVIEW
TV / PC INPUT
TV/
RADENERGY
 SA VING
MARKFAVRA TI\fMUTE
\fKMENUGUIDEQ.MENU
BA CKINF \f
A\bto Cong .
EXIT
\fKMENUGUIDEQ.MENU
BA CKINF\fEXIT
A\bto  C on g.
GUIDE (See	p.34)Shows	programme	guide.
  
						

							12
ENGENGLISH
USING THE MONITOR SET
USING THE MONITOR SET
Connecting to a PC
Your	Monitor	set	supports	the	Plug	&	Play*	feature	
and	has	the	built-in	speakers	with	Surround	X	that	
reproduces	sound	clearly	with	a	rich	bass.	
*	Plug	&	Play:	The	function	when	a	PC	recognizes	
a	connected	device	that	users	connect	to	a	PC	
and	turn	on,	without	device	configuration	or	user	
intervention.
yyIt	is	recommended	to	use	the	Monitor	set	
with	the	HDMI	connection	for	the	best	image	
quality.
yyIf	you	want	to	use	an	optional	external	
speaker	instead	of	the	built-in	speaker,	set	
the	Monitor	set	speaker	feature	to	off		
(See	p.52).
yyUse	a	High	Speed	HDMI™	Cable.
yyPlease	check	the	PC	environment	if	you	
cannot	hear	the	sound	in	HDMI	mode.
yyIf	you	want	to	use	HDMI-PC	mode,	you	must	
set	the	input	label	to	PC	mode.
NOTE
NOTE
HDMI connection
Transmits	the	digital	video	and	audio	signals	from	
your	PC	to	the	Monitor	set.	Connect	the	PC	and	
the	Monitor	set	with	the	HDMI	cable	as	shown	in	
the	following	illustrations.	 You	should	set	PC	as	
an	input	label	to	connect	the	PC	to	the	Monitor	set	
with	an	HDMI	connection.	 To	add	an	input	label,	
see	Adding	an	Input	label	on	See	p.30.
HDMI OUT
PC
VIDEO
COMPONENT IN
USB IN
AV
AUDIO
YPBPRL
RS\f232C IN
(CONTROL \b SERVICE)
RGB IN 
(PC)OPTICALDIGITAL AUDIO OUT
AUDIO IN
(RGB/DVI)
H / PANTENNA/CABLE IN
HDMI/DVI IN
DC\fINR
  
						

							13
ENGENGLISH
USING THE MONITOR SET
yyIf	you	do	not	use	an	optional	external	
speaker,	connect	the	PC	to	the	Monitor	set	
with	the	supplied	audio	cable.
yyUse	a	shielded	signal	interface	cable,	such	
as	D-sub	15	pin	signal	cable	and	DVI	to	
HDMI	cable,	with	a	ferrite	core	to	maintain	
standard		compliance	for	the	product.
yyIf	you	want	to	use	HDMI-PC	mode,	you	must	
set	the	input	label	to	PC	mode.
yyConnect	the	signal	
input	cable	and	tighten	
it	by 	turning 	the 	screws	
clockwise.
NOTE
yyIf	you	do	not	use	an	optional	external	
speaker,	connect	the	PC	to	the	Monitor	set	
with	the	supplied	audio	cable.
yyIf	you	turn	the	Monitor	set	on	when	the	set	
becomes	cold,	the	screen	may	flicker.	 This	
is	normal.
yySome	red,	green,	or	blue	spots	may	appear	
on	the	screen.	This	is	normal.
NOTE
DVI to HDMI connection
Transmits	the	digital	video	signal	from	your	PC	to
the	Monitor	set.	Connect	the	PC	and	the	Monitor
set	with	the	DVI	to	HDMI	cable	as	shown	the	
following	illustrations.
RGB connection
Transmits	the	analog	video	signal	from	your	PC	to
the	Monitor	set.	Connect	the	PC	and	the	Monitor
set	with	the	D-sub	15	pin	cable	as	shown	the	
following	illustrations.
yyDo	not	press	the	screen	with	your	finger	for	
a	long	time	as	this	may	result	in	temporary	
distortion	on	the	screen.
yyAvoid	displaying	a	fixed	image	on	the	
screen	for	a	long	period	of	time	to	prevent	
image	burn.	Use	a	screensaver	if	possible.
CAUTION
CAUTION
PC
RGB OUT (PC) 
AUDIO OUT
VIDEO
COMPONENT IN
USB IN
AV
AUDIO
\fPBPRL
RS-2\b2C IN
(CONTROL & SERVICE)\S
)
RGB IN (PC) 
OPTICAL
AUDIO IN
(RGB/DVI)
H 
/ P
DIGITALAUDIO OUTLL
ANTENNA/CABLE IN
HDMI/DVI IN
DC-INR
PC
VIDEO
COMPONENT IN
USB IN
AV
AUDIO
YPBPRL
RS-\f3\fC IN
(CONTROL & SERVICE\b
RGB IN 
(PC\bOPTICALDIGITAL AUDIO OUT
AUDIO IN
(RGB/DVI\b
H 
/ PANTENNA/CABLE IN
DC-INR
AUDIO OUT
DVI OUT
HDMI/DVI IN
  
						

							14
ENGENGLISH
USING THE MONITOR SET
Adjusting the screen
Selecting an image mode
Display	images	in	its	optimized	settings	by	
selecting	one	of	the	preset	image	modes.
1	 Press	MENU	to	access	the	main	menus.
2	 Press	the	Navigation	buttons	to	scroll	to	
PICTURE	and	press	OK.
3	 Press	the	Navigation	buttons	to	scroll	to	
Picture Mode	and	press	OK.
4	 Press	the	Navigation	buttons	to	scroll	to	an	
image	mode	you	want	and	press	OK.
ModeDescription
VividAdjusts	the	video	image	for	the	retail	environment	by	enhancing	the	Contrast, Brightness, Colour,	and	Sharpness.
StandardAdjusts	the	image	for	the	normal	environment.
CinemaOptimizes	the	video	image	for	the	cinematic	look	and	enjoy	movies	as	if	you	are	in	a	movie	theater.
SportOptimizes	the	video	image	for	high	and	dynamic	actions	by	emphasizing	primary	Colours 	such 	as 	white, 	grass,	or	sky	blue.
GameOptimizes	the	video	image	for	a	fast	gaming	screen	such	as	PCs	or	games.
Expert1/2Adjusts	the	detailed	video	image	settings	for	video	experts	as	well	as	general	viewers.
5	 When	you	are	finished,	press 	EXIT.	
When	you	return	to	the	previous	menu,	press	
BACK.
Customizing image options
Customize	basic	and	advanced	options	of	each	
image	mode	for	the	best	screen	performance.
1	 Press	MENU	to	access	the	main	menus.
2	 Press	the	Navigation	buttons	to	scroll	to	
PICTURE	and	press	OK.
3	 Press	the	Navigation	buttons	to	scroll	to	
Picture Mode	and	press	OK.
4	 Press	the	Navigation	buttons	to	scroll	to	an	
image	mode	you	want	and	press	OK.
5	 Select	and	adjust	following	options,	and	then	
press	OK.
OptionDescription
BacklightAdjusts	the	brightness	of	the	screen	by	controlling	the	LCD	backlight.	If	you	decrease	the	brightness	level,	the	screen	becomes	darker	and	the	power	consumption	will	be	reduced	without	any	video	signal	loss.
ContrastIncreases	or	decreases	the	gradient	of	the	video	signal.	You	may	use	Contrast	when	the	bright	part	of	the	image	is	saturated.
BrightnessAdjusts	the	base	level	of	the	signal	in	the	image.	You	may	use	Brightness	when	the	dark	part	of	the	image	is	saturated.
SharpnessAdjusts	the	level	of	crispness	in	the	edges	between	the	light	and	dark	areas	of	the	picture.	 The	lower	the	level,	the	softer	the	image.
ColourAdjusts	intensity	of	all	Colours.
TintAdjusts	the	 balance	 between	Red	and	Green	levels.
ColorTemperature
Set	to	warm	to	enhance	hotter	colours	such	as	red, 	or	 set 	to	 cool	to	make	picture	bluish.
Advanced ControlCustomizes	the	advanced	options.	See	more	information	about 	advanced 	options 	See 	p.50.
PictureResetRestores	the	options	to	the	default	setting.
6	 When	you	are	finished,	press 	EXIT.	
When	you	return	to	the	previous	menu,	press	
BACK.
  
						

							15
ENGENGLISH
USING THE MONITOR SET
Customizing PC display options
Customize	options	of	each	image	mode	for	the
best	image	quality.
yyThis	function	works	in	the	following	mode:		
RGB[PC]	mode.
1	 Press	MENU	to	access	the	main	menus.
2	 Press	the	Navigation	buttons	to	scroll	to	
PICTURE	and	press	OK.
3	 Press	the	Navigation	buttons	to	scroll	to	
Screen	and	press	OK.
4	 Select	and	adjust	following	options,	and	then	
press	OK.
OptionDescription
ResolutionSelects	a	proper	Resolution.
Auto ConfigureSets	to	adjust	the	screen	Position,	Size	and	Phase	automatically.	The	displayed	image	may	be	unstable	for	a	few 	seconds 	while 	the 	configuration	is	in	progress.
Position/Size/PhaseAdjusts	the	options	when	the	image	is	not	clear,	especially	when	characters	are	shaky,	after	the	auto	configuration.
ResetRestores	the	options	to	the	default	setting.
5	 When	you	are	finished,	press 	EXIT.
When	you	return	to	the	previous	menu,	press	
BACK.
Adjusting the sound
Selecting an sound mode
Play	the	sound	in	its	optimized	settings	by	
selecting	one	of	the	preset	sound	modes.
1	 Press	MENU	to	access	the	main	menus.
2	 Press	the	Navigation	buttons	to	scroll	to	
AUDIO	and	press	OK.
3	 Press	the 	Navigation 	buttons 	to 	scroll 	to 	Sound 
Mode	and	press	OK.
4	 Press	the	Navigation	buttons 	to	scroll	to	a	
sound	mode	you	want	and	press	OK.
ModeDescription
StandardSelects	when	you	want	standard-quality	sound.
MusicSelects	when	you	listen	to	music.
ModeDescription
CinemaSelects	when	you	watch	movies.
SportSelects	when	you	watch	sports	events.
GameSelects	when	you	play	games.
5	 When	you	are	finished,	press 	EXIT.
When	you	return	to	the	previous	menu,	press	
BACK.
Customizing sound options
Customize	options	of	each	sound	mode	for	the	
best	sound	quality.
1	 Press	MENU	to	access	the	main	menus.
2	 Press	the	Navigation	buttons	to	scroll	to	
AUDIO	and	press	OK.
3	 Press	the 	Navigation 	buttons 	to 	scroll 	to 	Sound 
Mode	and	press	OK.
4	 Press	the	Navigation	buttons 	to	scroll	to	a	
sound	mode	you	want	and	press	OK.
5	 Select	and	adjust	following	options,	and	then	
press	OK.
OptionDescription
Surround XThis	option	enhances	sound	depth	and	clarity	by	maximizing	the	Surround	effect.
TrebleControls	the	dominant	sounds	in	the	output.	When	you	turn	up	the	treble,	it	will	increase	the	output	to	the	higher	frequency	range.
BassControls	the	softer	sounds	in	the	output.	When	you	turn	up	the	bass,	it	will	increase	the	output	to	the	lower	frequency	range.
ResetResets	the	sound	mode	to	the	default	setting.
6	 When	you	are	finished,	press 	EXIT.
When	you	return	to	the	previous	menu,	press	
BACK.
yyYou	cannot	adjust	Treble	and	Bass	in	the	
RGB-PC	/	HDMI-PC	mode.
NOTE
  
						

							16
ENGENGLISH
WATCHING TV
WATCHING TV
Connecting an antenna or 
cable
Connect	an	antenna,	cable,	or	cable	box	to	watch	
TV	referring	to	the	following.	The	illustrations	may	
differ	from	the	actual	accessories	and	an	RF	cable	
is	optional.	
Connecting an antenna or basic 
cable
Connect	the	Monitor	set	to	a	wall	antenna	socket	
with	an	RF	cable	(75	ohm).
Connecting with a cable box
Connect	the	Monitor	set	to	a	cable	box	and	the	
cable	box	to	a	wall	antenna	socket	with	2	RF	
cables	(75	ohm).
yyUse	a	signal	splitter	to	use	more	than	2	 TVs.
yyIf	the	image	quality	is	poor,	install	a	signal	
amplifier	properly	to	improve	the	image	
quality.
yyIf	the	image	quality	is	poor	with	an	antenna	
connected,	aim	the	antenna	to	the	proper	
direction.
yyVisit	http://AntennaWeb.org	for	more	
information	about	the	antenna	and	cable	
connection.
NOTEyyMake	sure	not	to	bend	the	copper	wire	of	the	
RF	cable.
yyComplete	all	connections	instructions	
between	devices,	and	then	connect	the	
power	cord	to	the	power	outlet	to	prevent	
damages	to	your	Monitor	set.
CAUTION
Copper wire
Wall AntennaSocket
OutdoorAntenna
  
						

							17
ENGENGLISH
WATCHING TV
Accessing the TV for the 
first time
When	you	access	the	Monitor	set	for	the	first	
time,	the	initial	setting	screen	appears.	Select	a	
language	and	customize	the	basic	settings.
1	 Connect	the	power	cord	to	a	power	outlet.
2	 Press			on	the	Monitor	set	to	turn	the	
Monitor	set	on.
The	Power	indicator	lighting	is	turned	on.
yyYou	can	also	switch	the	Monitor	set	from	
PC	mode	to	TV	mode,	press	TV/PC.
yyYou	can	also	access	Initial Setting	by	
accessing	OPTION in	the	main	menus.
yyIf	you	do	not	operate	the	Monitor	set	
within	40	seconds	when	the	setting	menu	
screen	appears,	the	setting	menus	will	
disappear.
NOTE
NOTE
NOTE
NOTE
When	the	Monitor	set	is	in	Power	saving	
mode,	the	Power	indicator	lighting	blinks.
yyTo	display	images	in	the	best	quality	for	
your	home	environment,	select	Home 
Use mode.
yyStore	Demo	mode	is	suitable	for	the	retail	
environment.	
yyIf	you	select	Store Demo mode,	the	
previously	customized	settings	will	switch	
to	the	default	settings	of	Store Demo 
mode	in	2	minutes.	
If	you	do	not	complete	the	initial	setting,	it	
will	appear	whenever	you	access	the	 TV.
3	The	initial	setting	screen	appears	if	you	access	
the	TV	for	the	first	time.
4	 Follow	the	on-screen	instructions	to	customize	
your	Monitor	set	according	to	your	preferences.
Language

Mode Setting

Country

Auto Tuning
Selects	Home Use	for	the	home	environment.
Selects	a	country	to	display.
Selects	a	language	for	
the	display.
Scans	and	saves	available	programmes	automatically.
5	 When	the	basic	settings	are	complete,	press	
OK.
6	 To	turn	the	Monitor	set	off,	press		on	the	
Monitor	set.	
The	Power	Indicator	turns	off.
Disconnect	the	power	cord	from	the	power	
outlet	when	you	do	not	use	the	Monitor	set	
for	a	long	period	of	time.
CAUTION
  
						

							18
ENGENGLISH
WATCHING TV
Watching TV
1	 Press		 on	the	Remote	control	or		on	the	
Monitor	set	to	turn	the	Monitor	set	on.
2	 Press	INPUT	and	select	Antenna.
3	 Control	the	Monitor	set	using	the	following	
buttons	and	menus	while	you	are	watching	 TV.
Button / MenuDescription
P() orPR ( , )  Scrolls	through	the	saved	programmes
NumbersSelects	a	programme	by	entering	numbers
 (+ , -)	orVOL ( , )Adjusts	the	volume	level
MUTEMutes	all	sounds
PICTURESelects	one	of	the	preset	image	modes	(See	p.48)
AUDIOSelects	one	of	the	preset	audio	modes.	(See	p.52)
RATIOResizes	an	image	(See	p.28)
4	 To	turn	the	Monitor	set	off,	Press	 on	the	
Remote	control	or		on	the	Monitor	set.
Managing programmes
Automatically setting up 
programmes
For countries other than Finland, Sweden, 
Denmark and Norway)
Use	this 	to 	automatically 	find 	and 	store 	all 	available	
programmes.
1	 Press	MENU	to	access	the	main	menus.
2	 Press	the	Navigation	buttons 	to	scroll	to	
SETUP	and	press	OK.
3	 Press	the	Navigation	buttons	to	scroll	to	
Auto Tuning	and	press	OK.
4	 Select	Start	to	start	automatic	tuning.
The	TV 	scans 	and 	saves 	available 	programmes	
automatically.
5	 When	you	are	finished,	press 	EXIT.
When	you	return	to	the	previous	menu,	press	
BACK.
NOTE
yyUse	NUMBER	buttons	to	input	a	4-digit	
password	in	Lock System ‘On’.
yyAutomatic	Numbering:	Decide	whether	to	
use	the	programme	numbers	as	sent	by	
broadcasting	stations	for	tuning.
yyWhen	select	Italy	in	the	Country	menu,	if	
the	pop	up	is	displayed	when	the	conflicted	
Programme	after	Auto	Tuning,	select	a	
broadcaster	for	conflicting	programme	
number	to	solve.
  
						

							19
ENGENGLISH
WATCHING TV
Only for Finland, Sweden, Denmark and Norway
DVB-C	Auto	Tuning	is	a	menu	for	users	in	
countries	that	support	DVB	cable.
yyIf	you	want	to	select	the	Antenna
1	 Press	MENU	to	access	the	main	menus.
2	 Press	the	Navigation	buttons 	to	scroll	to	
SETUP	and	press	OK.
3	 Press	the	Navigation	buttons	to	scroll	to	
Auto Tuning	and	press	OK.
4	 Press	the	Navigation	buttons	to	scroll	to	
Antenna	and	press	OK.
5	 Select	Start	to	start	automatic	tuning.
The	TV 	scans 	and 	saves 	available 	programmes	
automatically.
6	 When	you	are	finished,	press 	EXIT.
When	you	return	to	the	previous	menu,	press	
BACK.
NOTE
yyUse	NUMBER	buttons	to	input	a	4-digit	
password	in	Lock System ‘On’.
yyAutomatic	Numbering:	Decide	whether	to	
use	the	programme	numbers	as	sent	by	
broadcasting	stations	for	tuning.
NOTE
yyUse	NUMBER	buttons	to	input	a	4-digit	
password	in	Lock System ‘On’.
yyAutomatic	Numbering:	Decide	whether	to	
use	the	programme	numbers	as	sent	by	
broadcasting	stations	for	tuning.
yyIf	you	want	to	select	the	Cable
1	 Press	MENU	to	access	the	main	menus.
2	 Press	the	Navigation	buttons	to	scroll	to	
SETUP	and	press	OK.
3	 Press	the	Navigation	buttons	to	scroll	to	
Auto Tuning	and	press	OK.
4	 Press	the	Navigation	buttons	to	scroll	to	
Cable	and	press	OK.
5	 Press	the	Navigation	buttons	to	scroll	to	
Comhem or Other Operators	and	press	OK.
6	 Press	the	Navigation	buttons	to	scroll	to	
Default, Full or User	and	press	OK.
7	 Press	the	Navigation	buttons	or	Number	
buttons	to	scroll	make	appropriate	adjustments	
(Except	for	Full	mode)	and	press	OK.
8	 Press	the	Navigation	buttons	to	scroll	to	
Close and	press	OK.
9	 Select	Start	to	start	automatic	tuning.
The	TV 	scans 	and 	saves 	available 	programmes	
automatically.
10	When	you	are	finished,	press 	EXIT.
When	you	return	to	the	previous	menu,	press	
BACK.
yyWhen	you	select	the	Cable,	the	Cable	
Service Operator	selection	screen	can	differ	
or	not	exist	by	the	Cable	situation	of	the	
applicable	country.
The	popup	window	to	select	between	Service 
Operator	is	only	shown	initially	for	the	3	cases	
when	you	accessing	the	Initial Setting	menu,	
when	you	change	from	Antenna	to	Cable	or	
when	you	access	the	menu	after	changing	the	
Country.
When	you	want	to	select	between	Service 
Operator	aside	from	the	above	3	cases,	you	
can	do	so	by	selecting	SETUP		→	Cable DTV 
Setting	→	Service Operator.
  
						

							20
ENGENGLISH
WATCHING TV
To	watch	DVB-C	in	the	countries	excluding	
Finland,	Sweden,	Denmark	and	Norway	select	'-	-'	
as	the	Country	in	OPTION.	
You	can	select	User	mode	or	Full	mode	in	Auto	
Tuning.	
The	corresponding	home	frequency	information	
may	need	to	be	changed	when	tuning	the	User	
mode,	and	the	corresponding	information	depends	
on	the	Cable	Service	Operator	(SO)	in	service.	
During	Full	mode	tuning,	some	channel	may	be	
restricted	for	some	Cable	Service	Operator	(SO),	
and	it	may	take	a	long	time	for	tuning.
If you select the “- -” of Country Setting, 
(Except for Finland, Sweden, Denmark and 
Norway)
NOTE
yyYour	cable	provider	may	charge	for	their	
services,	or	require	you	to	agree	to	its	items	
and	conditions	of	business.
yyDVB-C	Cable	may	not	operate	correctly	with	
some	cable	providers.
yyCompatibility	with	DVB-C	digital	cable	
broadcasts	is	not	guaranteed.
yyAcquired	certification 	SO: 	Sweden(Comhem),	
Denmark(YouSee,	Stofa).
If	there	are	not	any	Service	Operator	that	you	
want,	select	Other Operators.
If	you	select	"Other	Operators",	or	the	selected	
country	supports	"Other	Operators"	only,	it	may	
take	some	time	to	search	all	the	channels,	or	it	
may	not	search	some	of	the	channels.
If	some	of	the	channels	do	not	appear,	follow	
the	steps	below.
1.	SETUP → Auto Tuning → Cable
2.	Input	additional	values	such	as	the	
frequency,	symbol	rate,	modulation,	and	
network	ID	(You	can	ask	your	cable	service	
provider	for	the	above	information).
yyThe	following	values	are	needed	in	order	to	
search	all	available	programmes	quickly	and	
correctly.	 The	commonly	used	values	are	
provided	as	"default".	However,	for	correct	
settings,	please	inquire	of	the	cable	service	
provider.	When	running	 Auto	Tuning	in	
DVB	cable	mode,	selecting	Full	will	search	
through	all	frequencies	to	find	available	
channels.	In	the	case	when	the	programme	
is	not	searched	by	selecting	the	Default,	
perform	the	searching	by	selecting	the	Full.	
However,	in	the	case	when	the	programme	
is	searched	by	selecting	the	Full,	the	 Auto	
Tuning	time	can	be	taken	too	much.
	»Frequency:	Enter	a	user-defined	frequency	
range.
	»Symbol	rate:	Enter	a	user-defined	symbol	
rate	(Symbol	rate:	Speed	at	which	a		device	
such	as	modem	sends	symbols	to	a	
channel).
	»Modulation:	Enter 	a 	user-defined 		modulation.	
(Modulation:	Loading	of	audio	or	video	
signals	onto	carrier).
	»Network	ID:	Unique	identifier	allocated	for	
each	user.