LG Flatron M228wdp Owners Manual

							70
PARENTAL CONTROL / RATINGS
This  function  operates  according  to  information  from  the  broadcasting  station.  Therefore  if  the  signal  has
incorrect information, this function does not operate.
A password is required to gain access to this menu.
This set is programmed to remember which option it was last set to even if you switch the set off.
Prevents children from watching certain adult’s TV programmes, according to the ratings limit set.
PARENTAL CONTROL (IN DIGITAL MODE ONLY)
Select LOCK.
2
Select Parental Guidance.
3
Make appropriate adjustments.
4
Save.
1
Lock System : Off
Set Password
Block Programme
Parental Guidance : Off
LOCKMoveOK
Parental Guidance: Off
Lock System : Off
Set Password
Block Programme
Parental Guidance : Off
LOCKMoveOK
Parental Guidance: OffF F 
  
  
  
  
  
  
  
  
  
  
 OffG
G
Close
MENU
OK 
OK 
OK 
• Press the MENUor EXITbutton to close the menu window.
• Press the BACK button to move to the previous menu screen.
‘ownloaded8from8>anual>onitor5com8>anuals 
						

							71
PARENTAL CONTROL / RATINGS
The set can be configured so that the remote control is required to control it. This feature can be used to
prevent unauthorized viewing.
KEY LOCK
Select OPTION.
2
Select Key Lock.
3
Select On or Off.
4
Save.
1
Menu Language : English
Audio Language : English
Subtitle Language : English
Hard of Hearing
()Off
Country : UK
Input Label
Key Lock : Off
Set ID : 1
OPTIONMoveOK
E
Key Lock : Off
Menu Language : English
Audio Language : English
Subtitle Language : English
Hard of Hearing
()Off
Country : UK
Input Label
Key Lock : Off
Set ID : 1
OPTIONMoveOK
E
Key Lock : OffOff
OnOff
• In Key  Lock‘On’,  if  the  set  is  turned  off,  press
the r/ I, INPUT, PR 
D  Ebutton on the TV or
POWER, INPUT, PR + - or NUMBER buttons on
the remote control.
• With  the Key  Lock  On,  the  display  ‘ Key  Lock
On ’ appears on the screen if any button on the
front panel is pressed while viewing the TV.
MENU
OK 
OK 
OK 
• Press the MENUor EXITbutton to close the menu window.
• Press the BACK button to move to the previous menu screen.
‘ownloaded8from8>anual>onitor5com8>anuals 
						

							72
TELETEXT
TOP TEXT
The user guide displays four fields--red, green, yellow and blue at the bottom of the screen. The yellow field 
denotes the next group and the blue field indicates the next block.
A ABlock / group / page selection
With the blue button you can progress from block to block.
Use the yellow button to proceed to the next group with automatic overflow to the next block.
With the green button you can proceed to the next existing page with automatic overflow to the next group. 
Alternatively, the PR+button can be used.
The red button permits you to return to previous selection. Alternatively, the PR-button can be used.
A
ADirect page selection
Corresponding to the SIMPLE teletext mode, you can select a page by entering it as a three-digit number using
the NUMBER buttons in TOP mode. 
4 4
1
2
3
T
Th
hi
is
s 
 f
fe
ea
at
tu
ur
re
e 
 i
is
s 
 n
no
ot
t 
 a
av
va
ai
il
la
ab
bl
le
e 
 i
in
n 
 a
al
ll
l 
 c
co
ou
un
nt
tr
ri
ie
es
s.
.
Press the T TE
EX
XT
T
button to switch to teletext. The initial page or last page appears on the screen.
Two page numbers, TV station name, date and time are displayed on the screen headline. The first page number
indicates your selection, while the second shows the current page displayed.
Press the T TE
EX
XT
T
or E EX
XI
IT
T
button to switch off teletext. The previous mode reappears.
SWITCH ON/OFF 
A APage selection
Enter the desired page number as a three-digit number with the NUMBER buttons. If during selection you
press a wrong number, you must complete the three-digit number and then re-enter the correct page number. 
The PR+or -button can be used to select the previous or next page.
SIMPLE TEXT
1
2
Teletext is a free service broadcast by most TV stations which gives up-to-the-minute information on news,
weather, television programmes, share prices and many other topics.
The teletext decoder of this set can support the SIMPLE, TOP and FASTEXT systems. SIMPLE (standard tele-
text) consists of a number of pages which are selected by directly entering the corresponding page number.
TOP and FASTEXT are more modern methods allowing quick and easy selection of teletext information. 
qownloadedUfromUzanualzonitorHcomUzanuals 
						

							73
SPECIAL TELETEXT FUNCTIONS
A AR
RE
EV
VE
EA
AL
L
Press this button to display concealed information, such as solutions of riddles or puzzles.
Press this button again to remove the information from the display.
A AU
UP
PD
DA
AT
TE
E
Displays the TV picture on the screen while waiting for the new teletext page. The display will appear at the top
left hand corner of the screen. When the updated page is available then display will change to the page number.
Press this button to view the updated teletext page.
A AT
TI
IM
ME
E
When viewing a TV programme, press this button to display the time at the top right hand corner of the screen.
Press this button again to remove the display. In teletext mode, press this button to select a sub page number. The
sub  page  number  is  displayed  at  the  bottom  of  the  screen.  To  hold  or  change  the  sub  page,  press  the
RED/GREEN, PR+or -or NUMBER buttons.
Press again to exit this function.
A AH
HO
OL
LD
D
Stops the automatic page change which will occur if a teletext page consists of two or more sub pages. The num-
ber of sub pages and the sub page displayed is usually shown on the screen below the time. When this button is
pressed, the stop symbol is displayed at the top left-hand corner of the screen and the automatic page change is
inhibited. To continue press this button again.
?
FASTEXT
The teletext pages are colour coded along the bottom of the screen and are selected by pressing the correspond-
ing coloured button.
A APage selection
Press the button to select the index page.
You can select the pages which are colour coded along the bottom line with the same coloured buttons.
Corresponding to the SIMPLE teletext mode, you can select a page by entering its three digit page number 
with the NUMBER buttons in FASTEXT mode.
The PR+or -button can be used to select the previous or next page.
i
4 4
1
2
3
TELETEXT
qownloadedUfromUzanualzonitorHcomUzanuals 
						

							74
DIGITAL TELETEXT
Press  the  numeric  or PR  +or -button  to  select  a  digital
service which broadcasts digital teletext. 
To  know  which  are  digital  teletext  services,  refer  to  the
EPG service list. 
Follow the indications on digital teletext and move onto the
next  step  by  pressing TEXT, OK, 
D or E, F or G, RED,
GREEN, YELLOW, BLUEor NUMBERbuttons and so on. 
To  change  digital  teletext  service,  just  select  a  different
service by the numeric or PR +or -button. 
If  pressing  the MENU, GUIDEor INFO    i button,  the
teletext  service  disappear  temporarily.  When  pressing
these buttons again, the teletext service is appeared.
Press the numeric or PR +or -button to select a certain
service which broadcasts digital teletext. 
Press the TEXTor colour button to switch on teletext. 
Follow  the  indications  on  digital  teletext  and  move  onto
the  next  step  by  pressing OK, 
D or E, F or G, RED,
GREEN, YELLOW, BLUEor NUMBERbuttons and so on. 
Press the TEXTor colour button to switch off digital tele-
text and return to TV viewing.
Some  services  may  allow  you  to  access  text  services  by
pressing the REDbutton.
If  pressing  the MENU, GUIDEor INFO    i button,  the
teletext  service  disappears  temporarily.  When  pressing
these buttons again, the teletext service is appears.
*This function works in UK only.
The set gives you access to a digital teletext which is greatly improved in various aspects such as text,
graphics and so on. 
This  digital  teletext  can  be  accessed  by  special  digital  teletext  services  and  specific  services  which
broadcast digital teletext.
You should select off from the subtitle language to display teletext by pressing SUBTITLEbutton.
TELETEXT WITHIN DIGITAL SERVICE
TELETEXT IN DIGITAL SERVICE
1
2
3
1
2
3
4
qownloadedUfromUzanualzonitorHcomUzanuals 
						

							75
APPENDIX
Hard of Hearing(    )  : Off
Country : UK
Input Label
Key Lock : Off
Set ID : 1
Power Indicator
DDC CI : on
Factory Reset
OPTIONMoveOKD
Factory Reset
This function operates in current mode.
To initialize the adjusted value.
When the Lock Systemmenu is “On”, the message to enter the password appears.
Initializing 
(Reset to original factory settings)
1
Select OPTION.
2
Select Factory Reset.
3
Hard of Hearing(    )  : Off
Country : UK
Input Label
Key Lock : Off
Set ID : 1
Power Indicator
DDC CI : On
Factory Reset
OPTIONMoveOKD
Factory Reset
Enter Password
****
Cancel
• In Lock System“On”, if you forget your 
password, press ‘7’, ‘7’, ‘7’, ‘7’ on the remote
control handset.MENU
OK 
OK 
• Press the MENUor EXITbutton to close the menu window.
• Press the BACK button to move to the previous menu screen.
‘ownloaded8from8>anual>onitor5com8>anuals 
						

							76
APPENDIX
Hard of Hearing(    )  : Off
Country : UK
Input Label
Key Lock : Off
Set ID : 1
Power Indicatior
DDC CI : On
Factory Reset
OPTIONMoveOKD
Power Indicatior
It helps you control LED when power is turned on.
POWER INDICTOR
1
Select OPTION.
2
Select Power Indicator.
3
Hard of Hearing(    )  : Off
Country : UK
Input Label
Key Lock : Off
Set ID : 1
Power Indicatior
DDC CI : On
Factory Reset
OPTIONMoveOKD
Power Indicatior
MENU
OK 
OK 
• Press the MENUor EXITbutton to close the menu window.
• Press the BACK button to move to the previous menu screen.
F F 
  
 on  G
G
Close
Power Light
Kownloadedafromazanualzonitorycomazanuals 
						

							77
APPENDIX
• Press the MENUor EXITbutton to close the menu window.
• Press the BACK button to move to the previous menu screen.
Hard of Hearing(    )  : Off
Country : UK
Input Label
Key Lock : Off
Set ID : 1
Power Indicatior
DDC CI : on
Factory Reset
OPTIONMoveOKD
DDC CI
DDC/CI (Display Data Channel Command Interface) is a communication protocol for communications between
PC and set.
DDC/CI makes it possible to adjust and setup detailed functions on PC instead of the set OSD
Set can be adjusted with PC by connecting communication between PC and set when DDC/CI is ON, and set
cannot be adjusted with PC because communication between PC and set is disconnected when DDC/CI is OFF.
DDC CI(Only RGB, HDMI[PC] mode)
1
Select OPTION.
2
Select DDC CI.
3
Hard of Hearing(    )  : Off
Country : UK
Input Label
Key Lock : Off
Set ID : 1
Power Indicatior
DDC CI : on
Factory Reset
OPTIONMoveOKD
DDC CI
MENU
OK 
OK 
Off
OnOff
Kownloadedafromazanualzonitorycomazanuals 
						

							78
No picture &No sound
No color, poor colour,
or poor picture
Poor reception on 
some channels
Lines or streaks
in pictures
Horizontal/vertical bars
or picture shaking Picture appears slowly 
after switching on
ACheck whether the product is turned on.
ATry another channel. The problem may be with the broadcast.
AIs the power cord inserted into wall power outlet?
ACheck your antenna direction and/or location.
ATest the wall power outlet, plug another product’s power cord into the outlet
where the product’s power cord was plugged in.
AThis is normal, the image is muted during the product startup process. Please
contact your service centre, if the picture has not appeared after five minutes.
AAdjust Colour in menu option.
AKeep a sufficient distance between the product and the VCR.
ATry another channel. The problem may be with the broadcast.
AAre the video cables installed properly?
AActivate any function to restore the brightness of the picture. 
ACheck for local interference such as an electrical appliance or power tool.
AStation or cable product experiencing problems, tune to another station.
AStation signal is weak, reorient antenna to receive weaker station.
ACheck for sources of possible interference.
ACheck antenna (Change the direction of the antenna).
TROUBLESHOOTING
T Th
he
e 
 o
op
pe
er
ra
at
ti
io
on
n 
 d
do
oe
es
s 
 n
no
ot
t 
 w
wo
or
rk
k 
 n
no
or
rm
ma
al
ll
ly
y.
.
The remote control
doesn’t work
Power is suddenly 
turned off
ACheck to see if there is any object between the product and the remote control caus-
ing obstruction. Ensure you are pointing the remote control directly at the set.
AEnsure that the batteries are installed with correct polarity (+ to +, - to -).
AEnsure that the correct remote operating mode is set: TV, VCR, etc.
AInstall new batteries.
AIs the sleep timer set?
ACheck the power control settings. Power interrupted.
ANo broadcast on station tuned with Auto sleepactivated.
T
Th
he
e 
 v
vi
id
de
eo
o 
 f
fu
un
nc
ct
ti
io
on
n 
 d
do
oe
es
s 
 n
no
ot
t 
 w
wo
or
rk
k.
.
APPENDIX
Kownloadedafromazanualzonitorycomazanuals 
						

							79
APPENDIX
T Th
he
e 
 a
au
ud
di
io
o 
 f
fu
un
nc
ct
ti
io
on
n 
 d
do
oe
es
s 
 n
no
ot
t 
 w
wo
or
rk
k.
.
APress the VO L+ + 
 
or- -
button.
ASound muted? Press MUTEbutton.
ATry another channel. The problem may be with the broadcast.
AAre the audio cables installed properly?
AAdjust Balancein menu option.
AA change in ambient humidity or temperature may result in an unusual noise
when the product is turned on or off and does not indicate a problem with
the product. Picture OK & No sound
Unusual sound from
inside
the product
No output from one 
of the speakers
N No
o 
 i
im
ma
ag
ge
e 
 i
is
s 
 d
di
is
sp
pl
la
ay
ye
ed
d.
.
AAdjust brightness and contrast again.
AIf the product is in power saving mode, move the mouse or press any key.
AIn DVD Player or Set-top Box, check the power status of connected device.
AThe signal from the PC (Video card) is out of the vertical or horizontal 
frequency range of the product.
Adjust the frequency range by referring to the Specifications in this user’s guide.
AThe signal cable between PC and product is not connected. Check the signal cable.
APress the  ‘INPUT’ button in the remote control to check the input signal. Power is on, power indic-
tor is blue but the screen
appears extremely dark.
Does the ‘Out of range’
message appear?
Does the power indica-
tor look amber?
O On
nl
ly
y 
 R
RG
GB
B 
 m
mo
od
de
e 
 a
ap
pp
pl
li
ie
ed
d
Does the ‘Check signal
cable’ message appear?
‘ownloaded8from8>anual>onitor5com8>anuals