LG Flatron M228wa Safety Precautions
Have a look at the manual LG Flatron M228wa Safety Precautions online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 1069 LG manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
31 It should be set before run auto searching. Press the buttons to select the TV system of the country or part of the world from where you want to receive the TV channels. * Supporting channel : C(V/UHF 02~69) S(Cable 01~41) BG : PAL B/G, SECAM B/G (Europe/East Europe) I : PAL I/II (U.K/Ireland) DK : PAL D/K, SECAM D/K (East Europe) L: SECAM L/L (France) To select a programme number or enter the programe number with the number buttons from where you want to start searching for new channels. If e.g. you want to keep the channels 1 to 10 stored earlier, enter programe number 11. Your TV search for new channels from number 11 onwards. * Numbers available to store : 0~99 Press OKor button to start automatic programming. All available TV channels will be searched and stored automatically. To stop auto programming, press the MENUbutton. When auto programming is completed, the programme list menu appears. System Storage from Search Auto programme Press the buttons to select the channel number or enter the programme number with the number buttons in where you want to store channel. Press the buttons to select the TV system of the country or part of the world from where you want to receive the TV channels. BG : PAL B/G, SECAM B/G (Europe/East Europe) I : PAL I/II (U.K/Ireland) DK : PAL D/K, SECAM D/K (East Europe) L: SECAM L/L (France) Storage System Manual programmeTo change the channel. (Change each item in Manual Program and press the MENU button to save the settings) STATION ID set/Select the channel when using the TV Station OK MENU Auto programme Manual programme Programme edit Favourite programmeTo set Adjusting the Screen Station OK MENU Auto programme Manual programme Programme edit Favourite programmeTo set
32 Adjusting the Screen STATION ID set/Select the channel when using the TV Press thebuttons to select a TV channel to be deleted. -> Press the red key on the remote control -> The background colour of the selected channel will change to red. Press the Delete button one more time to delete the selected channel. All the following channels are shifted up one position. Press thebuttons to select a TV channel to be copied. -> Press the green key on the remote control. All the following channel numbers are shifted down one position. Press thebuttons to select a channel number to be moved. -> Press the yellow key on the remote control. -> Press the buttons to move the TV channel to the desired channel number. -> Press the yellow key again to release this function. Press the buttons to select a channel number to be skipped. -> Press the blue key on the remote control. The skipped TV channel is displayed in blue. Delete Copy Move Skip Press the buttons to select VHF/UHFfor aerial channels or Cablefor cable channels. To select the channel reception type. : VHF/UHF/ Cable. If you know the channel number, enter it directly with the digit buttons 0 to 9. In case of poor reception, you can improve the reception by fine tuning. Use the buttons to fine tune for the best picture and sound. Use the buttons to search next channel backward or forward direction. To see the assigned channel name. It is possible to change the name stored in the memory or to assign a name to a TV channel which has not yet been entered. A name with up 5 letters or numbers can be given to the programme numbers 0 to 99. Press the buttons to move cursor to be changed. -> Press the buttons to select a character.(space, number 0~9, and alphabet A~Z, +,-) -> Press OKbutton or MENU button.Band Channel Fine Search Name Programme editStation OK MENU Auto programme Manual programme Programme edit Favourite programmeTo set Programme edit OK MENU DeleteCopy MoveSkip 0 C 01 5 C 07 1 C 356 C 50 2 C 05 7 C 51 3 C 11 8 C 41 4 C 04 9 C 63
33 STATION ID set/Select the channel when using the TV Favourite programme This function lets you select your favourite programmes directly. (8 channel) Press the buttons to select a channel. * Yellow key (remote control) : Favourite Program On : Rotate favourite channel Favourite Program Off : To display the previously selected TV channel. Adjusting the Screen Station OK MENU Auto programme Manual programme Programme edit Favourite programme Off _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
34 Adjusting the Screen PICTURE ID adjust the picture function(RGB/DVI) PSM ThePSMfunction automatically adjusts the screen image quality. • Dynamic Select this option to display with a sharp image. • Standard The most general and natural screen display status. • Mild Select this option to display with a mild image. • Game Select this option to enjoy dynamic image when playing a game. • User Select this option to use the user-defined settings. TheCSMfunction automatically adjusts the screen colour set. • 9300K Slightly purplish white. • 6500K Slightly bluish white. • sRGB Slightly lower brightness. • User Select this option to use the user-defined settings. Red / Green / Blue Set your own colour levels. Picture OK MENU PSM CSM XD Cinema ResetDynamic Standard Mild Game User< CSM Picture OK MENU PSM CSM XD Cinema Reset 9300K 6500K sRGB User< XD Return to the default settings PSM, CSM, XD, Cinemaat the factory.Reset Picture OK MENU PSM CSM XD Cinema Reset Auto Manual< XDis LG Electronics unique picture improving technology to display a real HD source through an advanced digital signal processing algorithm. Its not available to use this function in RGB-PCor DVI-PCmodes. Manualis activated after selecting the user of PSM. (Its not working RGB-PC, DVI-PC mode.) ( Function works in the following mode -TV, AV, Component 480i/576i) When you watch the movie, this function adjusts the set to the best picture appearance. (Its not working RGB/DVI mode.) Cinema
35 PSM CSM ThePSMfunction automatically adjusts the screen image quality. • Dynamic Select this option to display with a sharp image. • Standard The most general and natural screen display status. • Mild Select this option to display with a mild image. • Game Select this option to enjoy dynamic image when playing a game. • User Select this option to use the user-defined settings. TheCSMfunction automatically adjusts the screen colour set. • Cool Slightly purplish white. • Normal Slightly bluish white. • Warm Slightly reddish white. • User Select this option to use the user-defined settings. Red / Green / Blue Set your own colour levels. PICTURE ID adjust the picture function (TV/Video) XDis LG Electronics unique picture improving technology to display a real HD source through an advanced digital signal processing algorithm. Its not available to use this function in RGB-PCor DVI-PCmodes. Manualis activated after selecting the user of PSM. OK MENU Adjusting the Screen Picture OK MENU PSM CSM XD Cinema ResetDynamic Standard Mild Game User< Picture OK MENU PSM CSM XD Cinema Reset Cool Normal Warm User< XD Picture OK MENU PSM CSM XD Cinema Reset Auto Manual< Return to the default settings PSM, CSM, XD, Cinemaat the factory.Reset (Function works in the following mode - TV, AV, Component 480i/576i) When you watch the movie, this function adjusts the set to the best picture appearance.Cinema
36 Adjusting the Screen SSM AVL Balance SOUND ID to adjust the sound function The best sound tone quality will be selected automatically depending on the video type that youre currently watching. • Flat: The most commanding and natural audio. • Music : Select this option to enjoy the original sound when listening to the music. • Movie: Select this option to enjoy sublime sound. • Sports : Select this option to watch sports broadcasting. • User: Select this option to use the user-defined audio settings. To adjust uneven sound volumes across all channels or signals automatically to the most appropriate level. To use this feature, select On. Use this function to balance sound from the left and right speakers. Sound OK MENU SSM AVL Balance 0Flat Music Movie Sports User<
37 TIME ID to adjust the time function •In the event of power interruption (disconnection or power failure), the Clockmust be reset. •Two hours after the set is switched on by the On timefunction it will automatically switch back to off mode unless a button has been pressed. •Once the Onor Off timeis set, these functions operate daily at the preset time. •Off timefunction overrides On timefunction if they are set to the same time. •The set must be in off mode for the On timeto work. •On time will move on to auto off if no activity is received in 2hours after setting the On time.Note Clock Off/On time Auto sleepThis function is used to set up of current time. You must set the time correctly before using On/Off timefunction. 1) Press the MENUbutton and then use button to select the TIMEmenu.2) Press the button and then usebutton to select the Clockmenu. 3) Pressbutton and then use button to set the hour(00~23). 4) Pressbutton and then use button to set the minutes(00~59). The default value is -- : --. 5) Press the OK/MENU button to save. The Off timeautomatically switches the set to off mode at the pre-set time. 1) Press the MENUbutton and then use button to select the TIMEmenu. 2) Press the button and then usebutton to select Off time or On time.3) Press the button and then usebutton to set the hour(00~23). 4) Press the button and then usebutton to set the minutes(00~59). 5) Press the button and then usebutton to select Onor Off. 6) Only On timefunction; Press the button and thenbutton to adjust volume level and programme number. 7) Press the OK/MENU button to save. If Auto sleepis active and there is no input signal, the set switches to off mode automatically after 10 minutes. ( It is not working in PC) 1) Press the MENUbutton and then use button to select the Autosleepmenu. 2) Press the button and then usebutton to select Onor Off. 3) Press the OK/MENUbutton to save. Adjusting the Screen Time OK MENU Clock Off time On time Auto sleep-- : --
38 Use the buttons to select Onor Off. It can be set up so that it can only be used with the remote control. This feature can prevent unauthorized viewing. In order to lock the OSD screen adjustment, set the Child locktab to the On position. In order to unlock it, do the following : * Push the MENUbutton on the remote control and set Child lockto the Off position. Adjusting the Screen SPECIAL ID to Select the special function Language Country Child lock DDC-CI XD Demo To choose the language in which the control names are displayed. Please select your local teletext language. If you dont, the teletext may not appear correctly on the screen. This feature is not available in all countries. Special OK MENU Language Country Child lock DDC-CI XD Demo Use it to see the difference between XD demo on and XD Demo off. (XD Demo function is not available in RGB PC/ DVI PC mode.) DDC/CI(Display Data Channel Command Interface) is communication protocol for communications between PC and monitor. DDC/CI makes it possible to adjust and setup detailed functions on PC instead of the monitor OSD. Monitor can be adjusted with PC by connecting communication between PC and monitor when DDC/CI is ON, and monitor cannot be adjusted with PC because communication between PC and monitor is disconnected when DDC/CI is OFF.
39 SCREEN ID to adjust the screen function Auto config. Manual config. ARC ResetThis button is for the automatic adjustment of the screen Position, Clockand Phase. (It is not working in RGB-DTV, DVI.) This button is for the manual adjustment of the screen Position, Clockand Phase. • H-Position (It is not working In DVI-PC mode.)To move the displayed image left or right.• V-Position (It is not working In DVI-PC mode.)To move the displayed image up or down.• Clock (It is not working In RGB-DTV, DVI mode.)To minimize any vertical bars or stripes visible on the screen background. The horizontal screen size will also change. • Phase (It is not working In RGB-DTV, DVI mode.)To adjust the focus of the display. This item allows you to remove any horizontal noise and clear or sharpen the image of characters. To select the image size of the screen. • When TV/Video mode: Spectacle, Original, 4:3, 16:9, 14:9, Zoom1, Zoom2 • When RGB/DVI/Component mode: 4:3, 16:9 Use this function to reset the product to the factory default. However, language selection will not be initialized.(It is working in RGB-PC, RGB-DTV, DVI-DTV mode.) Adjusting the Screen Screen OK MENU Auto config. Manual config. ARC ResetTo set
40 Troubleshooting • Install the product driver, which is provided with the product, or download it from the web site. (http://www.lge.com) • See if the plug&play function is supported by referring to the video card users guide. Did you install the driver? Unknown Product message appears when the product is connected. • Check if the power cord is properly connected to the outlet. • See if the power switch is turned on. • Adjust brightness and contrast again. • If the product is in power saving mode, move the mouse or press any key. • In DVD Player or Settop Box, check the power status of connected device. • The signal from the PC (video card) is out of the vertical or horizontal frequency range of the product. Adjust the frequency range by referring to the Specifications in this users guide. * Maximum resolution 19 inch : RGB : 1440 X 900 @75 Hz DVI : 1440 X 900 @60 Hz 20.1 inch : 1680 X 1050 @60 Hz 22 inch : 1680 X1050 @60 Hz • The signal cable between PC and product is not connected. Check the signal cable. • Press the INPUT button in the remote control to check the input signal. Is the products power cord connected? Is the power indicator turning on? Power is on, power indicator is blue but the screen appears extremely dark. Does the power indicator look amber? Does the Out of range message appear? Does the Check signal cable message appear? No image is displayed Note* Vertical frequency: To enable the user to watch the product display, screen image should be changed tens of times every second like a fluorescent lamp. The vertical frequency or refresh rate is the times of image display per second. The unit is Hz. * Horizontal frequency: The horizontal interval is the time to display one vertical line. When the 1 is divided by horizontal interval, the number of horizontal lines displayed every second can be tabulated as the horizontal frequency. The unit is kHz.