LG Flatron M228wa Safety Precautions

21
Select an input signal.
Press the INPUT button on the remote control to select the input signal. 
Or, press the INPUT button at the top side of the product.
AV 1Rear side of the Product
VCR / DVD When using the SCART cable.
C
When connecting with a RCA cable.• Select AV2
When connecting with a S-Video cable.
• Select AV2
BA
SCART Cable 
Please, use shielded scart cable.
(Not Included)
2.
INPUT OK
INPUT OK
Connecting to External Devices
Input 
TV
AV1
AV2
Component
RGB
DVI
OKInput 
TV
AV1
AV2
Component...

22
Connecting to External Devices
AUDIO
COMPONENT INVIDEOYPBPRLR
AUDIO
COMPONENT INVIDEOYPbPrLR
Rear side of the Product
Component Cable
Connect the video/audio cable as shown in the figure below and then connect the power
cord (See page 19).
Connecting to Set-top Box /DVD (480p/576p/720p/1080i/480i/576i)
Set-top Box /DVD
• Connect the input terminal with a proper colour match.
(Not included)
1.
Audio Cable
(Not included)
Select an input signal.
Press the INPUT button on the remote control to select the...

23
Connecting to External Devices
Connect the D-sub cable, RCA/PC cable as shown in the below figure 
and then connect the power cord. (see page 19)
RGB(PC/DTV) IN  AUDIO
(RGB/DVI) IN
[Rear side of the Product]
[Set-top Box/DVD] D-Sub cable
RCA-Stereocable
(not included)
When watching RGB/DVI from the DVD/Set-top Box
Select an input signal.
Press the INPUT button on the remote control to select the input signal. 
Or, press the INPUT button at the top side of the product.2. 1.
INPUT OK
INPUT OK
Input 
TV...

24
Rear Side of the Product
Antenna Cable
(Not included.)
Check if the antenna cable is connected at the rear side of the product
and then, connect the power cord.
When Watching TV
Select an input signal.
Press the INPUT button on the remote control to select the input signal. 
Or, press the INPUT button at the top side of the product.
• Select TV
RGB(PC/DTV) IN DV I  I NANTENNA IN  AUDIO
(RGB/DVI) IN
H/P S-VIDEO
AV IN 2 AV 1(MONO)VIDEOAUDIOLR
AUDIO
COMPONENT INVIDEOYPBPRLR
ANTENNA IN
1.
2.
INPUT OK...

25
To arrange cables using cable management
RGB(PC/DTV) IN DV I  I NANTENNA IN  AUDIO
(RGB/DVI) IN
H/P S-VIDEO
AV IN 2 AV 1(MONO)VIDEOAUDIOLR
AUDIO
COMPONENT INVIDEOYPBPRLR
P
U
S
HC
ABL
EMANAGEMENT
ANTENNA IN
H/P S-VIDEO
AV IN 2 AV 1(MONO)VIDEOAUDIOLR
AUDIO
COMPONENT INVIDEOYPBPRLR
PUSHCA
BLE MANAGEMENT
cable
management 
1.
2.Arrange the cables in the center as shown in the following picture.
Fit the cable management  to the Holder Groove downwards.
Push down slightly.
Warning• Do not use the cable...

26
Name of the Buttons in the Screen Adjustment Unit
Power Indicator
• Adjust the volume. •Use this button to control the channel for the TV signal.
•  Use this button to show/hide the OSD (On Screen Display) menu   
screen.MENU Button
•  Use thisbutton to select an icon or adjust the setting in the OSD screen.OSD Select/Adjust Button
Adjusting the Screen
INPUTMENUPRVOLOK
Volume 
30
•  This Indicator lights up blue when the display operates normally 
(On Mode). If the display is in Sleep (Energy Saving)...

27
Adjusting the Screen
Name of the Buttons in the Screen Adjustment Unit
OK Button
TVTelevision
AV1SCART
AV2CVBS, S-Video
ComponentHDTV, DVD
RGBD-Sub analog signal
DVI DVI Digital signalINPUT Button
•The unit that receives the signal from the remote control.IR Receiver
•OK button is usually used in choosing the MENU.
When there is no MENU on the screen pushing the OK button will
give the information about the current input source.
Each time you press the Input button it will change to TV           AV1...

28
OSD(On Screen Display)
The OSD function enables you to adjust the screen status conveniently since it provides graphical
presentation. Note
OSD (On Screen Display) Menu 
Icon Function Description
Station
Picture
Sound
Time
Adjusting the time function. 
Adjusting the screen function.  Adjusting the sound function.Adjusting the picture function.
Set/Select the channel when using the TV
Special
Selecting the special function.
Screen
Adjusting the Screen
 

29
Adjusting the Screen
OSD (On Screen Display) Screen Tracking Order
• Use the remote control to adjust the OSD screen.
Pop up the
menu screenMove where
you want to 
adjustSelect a menu icon
Adjust the status
Save
adjustmentExit from the
menu screen.
PR
PR
OKVOL
VOL
PR
PR
OKVOL
VOLMENUMENUOKOK
Press the MENUButton, then the main menu of the OSD will appear.
To access a control, use the            Buttons. 
When the icon you want becomes highlighted, press the OKButton.
Use the...

30
Adjusting the Screen
1. Press the               button and then, OKbutton to select your desired language.
2. Press the               button and then, OKbutton to select your country.
* If you want to change Language/ Country selection
1. Press the MENUbutton and then        button to select the Specialmenu. 
2. Press the     button and then       button to select Language.
The menus can be shown on the screen in the selected language.
Or, Press the     button and then        button to select Country....