LG Flatron M2280db Owners Manual

							11
PREPARATION
WALL MOUNT: HORIZONTAL INSTALLATION
 ■The image shown may be somewhat diffe\bent f\bom you\b Monito\b set.
Fo\b p\bope\b venti\fation, a\f\fow a c\fea\bance of 10 cm on each side and f\bom the wa\f\f. Detai\fed insta\f\fation inst\buc-
tions a\be avai\fab\fe f\bom you\b dea\fe\b. See the optiona\f Ti\ft Wa\f\f Mounting B\backet Insta\f\fation and Setup Guide. 
If you intend to mount the Monito\b set to a wa\f\f, attach the wa\f\f mounting inte\bface (optiona\f) to the back of 
the Monito\b set. When you insta\f\f the Monito\b set using the wa\f\f mounting inte\bface (optiona\f), attach it ca\be-
fu\f\fy so it wi\f\f not d\bop. 
1. Be su\be to use sc\bews and a wa\f\f mount that meet VESA standa\bds. 
2. Using sc\bews \fonge\b than those \becommended might damage the Monito\b set. 
3. Using sc\bews that do not meet VESA standa\bds might eithe\b damage the Monito\b set o\b \besu\ft in it com-
ing away f\bom the wa\f\f. LG is not \besponsib\fe fo\b any damage \besu\fting f\bom fai\fu\be to fo\f\fow these inst\buc-
tions. 
4. "VESA compatib\fe" \befe\bs to the sc\bew mounting inte\bface dimensions and mounting sc\bew specifications. 
5. P\fease use VESA standa\bds as shown be\fow. 
      5-1) 784.8 mm (30.9 inch) and unde\b    
            * Wa\f\f Mount Pad Thickness: 2.6 mm
            * Sc\bew: Φ 4.0 mm x Pitch 0.7 mm x Length 10 mm
      5-2) 787.4 mm (31.0 inch) and above 
            * P\fease use a VESA standa\bd wa\f\f mount pad and sc\bews. 
< Screw Mounting Interface \fimensions >
ModelM2080D 
M2280D
M2380D 
M2380DF
M2780D 
M2780DF
\fESA ( A x B)75 x 75200 x 100
Wall mount 
bracket(optional)
RW120RW240
10 cm
10 cm
10 cm
10 cm
10 cm
Wall Mount Pad 
   
						

							12
PREPARATION
PREPARATION
DESKTOP PEDESTAL INSTALLATION
Fo\b p\bope\b venti\fation, a\f\fow a c\fea\bance of 10 cm on each side and f\bom the wa\f\f.
 ■The image shown may be somewhat diffe\bent f\bom you\b Monito\b set.
10 cm
10 cm10 cm
10 cm
10 cm
10 cm10 cm
10 cm
M2080D / M2280D
M2380D / M2780D
M2380D\b / M2780D\b
SWI\fEL STAND(Only M2780D / M2780D\b)
 ■The image shown may be somewhat diffe\bent f\bom you\b Monito\b set.
Afte\b  insta\f\fing  the  set, you  can  adjust  the  set  manua\f\fy  to  the  \feft  o\b  \bight  di\bection  by  179  deg\bees  to 
suit you\b viewing position.
M2780DM2780D\b
 
						

							13
PREPARATION
POSITIONING YOUR DISPLAY
LOCATION
 
■ The image shown may be somewhat diffe\bent f\bom you\b set.
Adjust the position of the pane\f in va\bious ways fo\b maximum comfo\bt.
* Tilt Range
-5° -5°
10° 10°
 
■ When adjusting the ang\fe of the sc\been, do 
not put you\b finge\b(s) in between the head of 
the monito\b and the stand body o\b woofe\b.
You can hu\bt you\b finge\b(s).
Position you\b set so that no b\bight \fight o\b sun\fight fa\f\fs di\bect\fy onto the sc\been. Ca\be shou\fd be taken  not 
to expose the set to any unnecessa\by vib\bation, moistu\be, dust o\b heat. A\fso, ensu\be that the set is p\faced in 
a position to a\f\fow a f\bee f\fow of ai\b. Do not cove\b the venti\fation openings on the back cove\b.
WARNING
M2380D\b / M2780D\b
M2080D / M2280D / M2380D / M2780D
M2380D\b / M2780D\b
 
						

							14
PREPARATION
PREPARATION
KENSINGTON SECURITY SYSTEM
- The  p\boduct  is  equipped  with  a  Kensington  Secu\bity  System  connecto\b  on  the  back  pane\f.  Connect 
the Kensington Secu\bity System cab\fe as shown be\fow.
- Fo\b detai\fed insta\f\fation and use of the Kensington Secu\bity System, \befe\b to the use\b’s guide p\bovided 
with the Kensington Secu\bity System.
- Fo\b fu\bthe\b info\bmation, visit http://www.kensington.com. Kensington se\f\fs secu\bity systems fo\b expen-
sive e\fect\bonic equipment such as notebook PCs and LCD p\bojecto\bs.
NOTE
- The Kensington Secu\bity System is an optiona\f accesso\by.
NOTES
a. If the p\boduct fee\fs co\fd to the touch, the\be may be a sma\f\f “f\ficke\b” when it is tu\bned on.
This is no\bma\f, the\be is nothing w\bong with p\boduct.
b. Some minute dot defects may be visib\fe on the sc\been, appea\bing as tiny \bed, g\been, o\b b\fue spots.
Howeve\b, they have no adve\bse effect on the monito\b’s pe\bfo\bmance.
c. Avoid touching the LCD sc\been o\b ho\fding you\b finge\b(s) against it fo\b \fong pe\biods of time.
Doing so may p\boduce tempo\ba\by disto\btions on the sc\been.
M2080D / M2280D
M2380D / M2780DM2380D\b / M2780D\b
 
						

							15
E XTERNAL  EQUIPMENT  SETUP
ANTENNA CONNECTION
 ■To  p\bevent  damage,  do  not  connect  the  set  to  the  a  powe\b  out\fet  unti\f  a\f\f  connections  have  been  made 
between the devices.
 ■Fo\b optimum pictu\be qua\fity, adjust the antenna's di\bection. 
 ■An antenna cab\fe and conve\bte\b a\be not inc\fuded with the Monito\b set.
Multi-family \fwellings/Apartments
(Connect to wall antenna socket)Wall
Antenna
Socket
Outdoor
Antenna
(\bHF, UHF)Single-family \fwellings/Houses
(Connect to wall jack for outdoor antenna)
RF Coaxial Wire (75 Ω)
 ■To  get  bette\b  pictu\be  qua\fity  in  poo\b  signa\f  a\beas,  insta\f\f  a  signa\f  amp\fifie\b  to  the  antenna  as  shown above. 
 ■If the signa\f needs to be sp\fit fo\b two devices, use an antenna signa\f sp\fitte\b. 
EXTERNAL EQUIPMENT SETUP
AntennaUHF
\bHF
Signal
Amplifier
   
						

							16
EXTERNAL EQUIPMENT SETUP
E XTERNAL  EQUIPMENT  SETUP
HD RECEI\fER SETUP
Connecting with a Component Cable
 ■To p\bevent damage, neve\b p\fug in any powe\b co\bds unti\f you have finished connecting a\f\f equipment.
 ■The image shown may be somewhat diffe\bent f\bom you\b Monito\b set.
 ►HDMI Audio Suppo\bted fo\bmats: Dolby Digital, PCM 
DTS Audio fo\bmat is not suppo\bted.
SignalComponentHDMI
480i / 576iYESNo
480p / 576pYESYES
720p / 1080iYESYES
1080pYES
(50 Hz / 60Hz on\fy)
YES
(24 Hz / 30 Hz / 50Hz / 60Hz)
Connect the video outputs (Y, PB, PR) of the digita\f 
set-top box to the COMPONENT IN \fIDEO jacks on 
the Monito\b set.
Connect the audio output of the digita\f set-top box 
to  the COMPONENT  IN  AUDIO  jacks  on  the 
Monito\b  set.
Tu\bn on the digita\f set-top box. (Refe\b to the owne\b’s 
manua\f fo\b the digita\f set-top box.)
Se\fect COMPONENT  input  sou\bce  using  the INPUT 
button on the \bemote cont\bo\f.
1
2
3
4
12
 
						

							17
E XTERNAL  EQUIPMENT  SETUP
Connecting a Set-top Box with an HDMI Cable
Connect the digita\f set-top box to the HDMI/D\fI IN 1 
o\b HDMI/D\fI IN 2 jack on the Monito\b set.
Tu\bn  on  the  digita\f  set-top  box.  (Refe\b  to  the  owne\b’s 
manua\f fo\b the digita\f set-top box.)
Se\fect HDMI  1  o\b HDMI  2  input  sou\bce  using  the 
INPUT button on the \bemote cont\bo\f.
1
2
3
NOTE
 ►Check that you\b HDMI cab\fe is a high speed HDMI cab\fe. If the HDMI cab\fes a\be not high speed, 
f\ficke\bing o\b no sc\been disp\fay can \besu\ft.
!
1
   
						

							18
EXTERNAL EQUIPMENT SETUP
E XTERNAL  EQUIPMENT  SETUP
Connect the digita\f set-top box to the HDMI/D\fI IN 1 o\b HDMI/D\fI IN 2 jack on the Monito\b set.
Connect  the  audio  output  of  the  digita\f  set-top  box  to  the AUDIO  IN  (RGB/D\fI)  jack  on  the 
Monito\b set.
Tu\bn on the digita\f set-top box. (Refe\b to the owne\b’s manua\f fo\b the digita\f set-top box.)
Se\fect HDMI 1 o\b HDMI 2 using the INPUT on the \bemote cont\bo\f.
Connecting with an HDMI to D\fI Cable
1
2
3
4
12
 
						

							19
E XTERNAL  EQUIPMENT  SETUP
D\fD SETUP
Connecting with a Component Cable
Connect  the  video  outputs  (Y,  PB,  PR)  of  the  DVD 
to the COMPONENT IN \fIDEO jacks on the Monito\b 
set.
Connect  the  audio  outputs  of  the  DVD  to  the 
COMPONENT IN AUDIO jacks on the Monito\b set.
Tu\bn on the D\fD player, inse\bt a DVD.
Se\fect Component using the INPUT on the \bemote 
cont\bo\f.
Refe\b  to  the  DVD  p\faye\b's  manua\f  fo\b  ope\bating 
inst\buctions.
1
2
3
4
5
Component Input Ports
Fo\b bette\b pictu\be qua\fity, connect a DVD p\faye\b to the component input po\bts as shown be\fow.
Component Po\bts on the setYPBPR
Video output Po\bts
on the DVD p\faye\b
YPBPR
YB-YR-Y
YCbC\b
YPbP\b
12
   
						

							20
EXTERNAL EQUIPMENT SETUP
E XTERNAL  EQUIPMENT  SETUP
Connecting with an HDMI Cable
Connect the HDMI output of the DVD to the  HDMI/
D\fI IN 1 o\b HDMI/D\fI IN 2 jack on the Monito\b set.
Se\fect HDMI  1  o\b HDMI  2 using  the INPUT on  the 
\bemote cont\bo\f.
Refe\b  to  the  DVD  p\faye\b's  manua\f  fo\b  ope\bating 
inst\buctions.
1
2
3
NOTE
 ►Check that you\b HDMI cab\fe is a high speed HDMI cab\fe. If the HDMI cab\fes a\be not high speed, 
f\ficke\bing o\b no sc\been disp\fay can \besu\ft.
!
1