LG Flatron M198wa Safety Precautions

1
Please read these safety precautions carefully before using the product.
Precautions in installing the Product
If you ignore the caution message, you may be slightly injured or the product may be damaged
If you ignore the warning message, you may be seriously injured or there is a possibility of
accident or death.
Keep away from heat sources like electrical heaters.
- Electrical shock, fire, malfunction or deformation may occur.
Keep the packing anti-moisture material or vinyl packing out of the reach...

22
Electrical Power Related Precautions
Make sure to connect the power cable to the grounded current.
- You may be electrocuted or injured.
Use the rated voltage only.
- The product can be damaged, or you may be electrocuted.
During a thunder or lightning storm, unplug the power cable or signal cable.
- You may be electrocuted or a fire can break out.
Do not connect several extension cords, electrical appliances or electrical heaters to a single outlet. 
Use a power bar with a grounding terminal designed...

3
Safety Precautions
Caution
Precautions in Using the Product
Warning
Do not put or store inflammable substances near the product.
- There is a danger of explosion or fire due to careless handling of the inflammable substances.
When cleaning the brown tube surface, unplug the power cord and scrub with soft cloth to prevent
scratching. Do not clean with a wet cloth.
- The water can sink into the product, which can cause electric shock or serious malfunction.
Take a rest from time to time to protect your...

4
Before Connecting to the PC
Connecting the stand
Before setting up the product, ensure that the power supply, the computer system,
and other attached devices is turned off. 
1.Place the monitor with its front facing downward on a soft cloth.
2. Connect the Stand Base to the Stand Body and press latches at the button toward each end.
3.Connect the Stand, assembled in step 2, to the Monitor Panel until you hear a Click.
4.Once assembled take the monitor up carefully and face the front side
Important
Once...

5
Before setting up the product, ensure that the power supply, the computer system,
and other attached devices is turned off. 
Positioning your display
1.Adjust the position of the panel in various ways for maximum comfort.
Tilt Range : -3˚~10˚                             Swivel : 350˚
Before Connecting to the PC
Warning:
When adjusting the angle of the screen, do not put your
finger(s) in between the head of the monitor and the stand
body. You can hurt your finger(s).
AUDIO
COMPONENT IN
Locking Device...

6
Name and Function of the Parts
Name of the Remote Control Buttons (A Type)
POWERTVINPUT
PR
PR
OK MUTE
LIST
MENU
Q.VIEW
SLEEPARC
SSM PSM
TEXT
VOL
VOL
I/II
POWER
TV : TV button
INPUT
NOTE : In case of weak stereo
sound signals, with stereo or
Nicam stereo transmission,
select mono reception.
Each time you press the Input button it will
change to 
TV           AV1          AV2         Component       
RGB         DVI.
If nothing is inputted for several seconds the
screen will automatically move to the...

7
PR (          ) Buttons
Able to change channel.
VOL (          ) Buttons 
Able to adjust sound.
OK Button
Use when functional adjustment is completed.
MUTESwitches the sound on or off.
PSM (Picture Status Memory) Button
Press repeatedly to select Dynamic, Standard, Mild, Gameor User
picture mode.
SSM (Sound Status Memory) ButtonUse this button to select the sound tone. Press repeatedly to select Flat, Music, Movie, Sports, Usersound tone.
TEXT
To select the teletext on or off. The main index page or...

8
ARC To select the image size of the screen.• When TV / AV mode: Spectacle, Original, 4:3, 16:9, 14:9, Zoom1, Zoom2 • When RGB/DVI /Componentmode: 4:3, 16:9
I/II: Bilingual choice and sound mode selection
[TV]
To switch from Stereoto Monosound in case of stereo transmission,or from Nicam Stereoto Nicam Mono, in case of digital transmission.to switch from Nicam DualIto Nicam Dual IIor Nicam Dual
I+IIin case of Nicam Dual transmission.
to choose between DualI, Dual IIor Dual I+IIin case of
bilingual...

9
HOLD
Press the button to stop the automatically rotating
of the sub pages. Press the button again to
continue the automatic rotating again.
SIZE
Press the button repeatedly to display the upper
part, the lower part and then to return to the
normal page size. 
MIX
Display the teletext pages superimposed on
the TV picture. To switch the TV picture off
press this button again.
TIME
Press this button to select a sub page number. 
The sub page number is displayed at the 
bottom of the screen. To hold or...

REVEAL
Press the button to reveal/conceal the hidden
information, such as solutions to riddles and
puzzles. Press this button again to remove the
information from the display.
INDEX
To display the main index.
MODE 
The mode will be switched in the Teletext mode.
UPDATE
Press the button to appear the TV programme. 
At the top of screen indicates that you are still in the
teletext mode. Before interrupting teletext, you may
select a page number. When the page has been
found, the information line appears...