LG Flatron L226wu Users Guide

Make sure to read the Important Precautions before using the product. 
Keep the User's Guide(CD) in an accessible place for future reference.\
See the label attached on the product and give the information to your
dealer when you ask for service.
L226WU
User’s Guide
 

A1
This unit has been engineered and manufactured to ensure your personal
safety, however improper use may result in potential electrical  shock or fire
hazards. In order to allow the proper operation of all safeguards
incorporated in this display, observe the following basic rules for its
installation, use, and servicing.
On Safety
Use only the power cord supplied with the unit. In case you use another \
power
cord, make sure that it is certified by the applicable national standard\
s if not being...

A2
Important Precaautions
On Installation
Do not allow anything to rest upon or roll over the power cord, and do n\
ot place the
display where the power cord is subject to damage.
Do not use this display near water such as near a bathtub, washbowl, kit\
chen sink,
laundry tub, in a wet basement, or near a swimming pool.
Displays are provided with ventilation openings in the cabinet to allow \
the release of
heat generated during operation. If these openings are blocked, built-up\
 heat can
cause failures...

A3
Connecting the Display
Before setting up the monitor, ensure that the power to the monitor, the\
 computer
system, and other attached devices is turned off.
Connecting the stand base 
1. Place the monitor with its front facing downward on a cushion or soft cl\
oth.
2.Rotate the Stand Body as shown in figure      .1
3.Assemble the Stand Base(Front, Rear) into the Stand Body in the correc\
t direction.
4.Once assembled take the monitor up carefully and face the front side
1
Stand BodyStand Base
Warning...

A4
Connecting the Display
Disassembling the stand
1.Put a cushion or soft cloth on aflat
surface.
3.Pushing Latch inside, Take the stand base from stand body.
2.Place the monitor face Down on
the cushion or soft cloth.
ImportantThis illustration depicts the general model of connection. Your monitor \
may differ from the items
shown in the picture.
Do not carry the product upside down holding only the stand base. The pr\
oduct may fall and get
damaged or injure your foot.
 

A5
Connecting the Display
Before setting up the monitor, ensure that the power to the monitor, the\
 computer
system, and other attached devices is turned off. 
Positioning your display
1. Adjust the position of the panel in various ways for maximum comfort.Tilt Range : -3˚~17˚                                              \
       Swivel :356˚
Ergonomic
It is recommended that in order to maintain an ergonomic and comfortable\
 viewing position, the forward 
tilt angle of the monitor should not exceed 5...

A6
Using the Computer
1.Make sure to turn off the computer and  product. Connect signal input cable      and power cable      in order, then tigh\
ten the
screw of the signal cable. 1
2.Press        button on the front switch panel to turn the power on.
When monitor power is turned on, the 'Self Image Setting
Function' is executed automatically.
(Only Analog Mode)
NOTE
‘ Self Image Setting Function’?  This function provides the user with optimal display settings.When the u\
ser
connects the...

A7
Use USB programs 
Connecting the USB(Universal Serial Bus) Cable 
D-SUB                                        DVI-D
AC-IN
One USB Upstream port  
Two USB Downstream ports  Connect to downstream connectors of desktop or
laptop computers, mouse, memory stick or USB 
hard disk.  (However, the computer must support 
USB and have the USB port.) 
1. Elevate the monitor as far as possible follow 
the arrow to rotate, and plug the USB cable 
into the monitor. 
■When connecting multi screens 
2. Tidy the USB...

A8
Use USB programs 
The display feature can be used by easily connecting the USB cable betwe\
en
laptops/desktops and the USB port at the back of the monitor. 
System Requirements
In order to make full use of USB Display features, your computer must me\
et the following minimum
system requirements: 
•1.2 GHz CPU or higher, 512 MB memory or higher (Recommended Specificati\
ons: 1.6 
GHz Core2 Duo CPU, 1 GB memory) 
•USB 2.0 Interface •Windows 2000 (Service Pack 4), Windows XP (Service Pack 2) Operating\...

A9
Use USB programs 
A9
■Screen Resolution :  Provides information on the 
resolution that the USB supports.  ■ Color Quality :  You can choose 16 
bit or 32 bit colors. 
4.When the installation of "LG USB Easy Connection" program
is completed, icons as shown in the picture will be created in
the taskbar. With these icons, you can easily use features
such as Screen Resolution, Color Quality, Screen Rotation,
Extend To, Extend and Mirror.
■ Screen Rotation :  You can set the direction to display...