LG Flatron L226wt Users Guide

Make sure \bo read \bhe\f Import\bnt Pre\f\butions \fefore using \bhe prod\fuc\b. 
Keep \bhe User's Gui\fde(CD) in an access\fi\fle place for fu\bure\f reference.
See \bhe la\fel a\b\bache\fd on \bhe produc\b and g\five \bhe informa\bion \b\fo your
dealer when you ask \ffor service.
L226WT 
L226WTX
L226WT\b
L226WTG
L226WTM
User’s Guide
L2 26WT Y
 

A1
This unit has been engineered and manufactured to ensure your personal
safety, however improper use may result in potential electrical  shock or fire
hazards. In order to allow the proper operation of all safeguards
incorporated in this display, observe the following basic rules for its
installation, use, and servicing.
On Safety
Use only the power cord supplied with the unit. In case you use another power
cord, make sure that it is certified by the applicable national standards if not being
provided...

A2
Important Precautions
On Installation
Do not allow anything to rest upon or roll over the power cord, and do not place the
display where the power cord is subject to damage.
Do not use this display near water such as near a bathtub, washbowl, kitchen sink,
laundry tub, in a wet basement, or near a swimming pool.
Displays are provided with ventilation openings in the cabinet to allow the release of
heat generated during operation. If these openings are blocked, built-up heat can
cause failures which...

A3
Connecting the speaker
1
. Place the monitor with its front facing downward on a soft cloth.
2.Insert the protruding hook of the speaker in the direction of the slot in the back of the product.
Connecting  the speakers - The feature is only for speaker models - L226WTM
Hook
Slot
Audio DC-In
CableAUDIO IN
3. After setting up the speaker, connect the Audio DC-In Cable to the back of the product. 
DC-OUT
DownloadedwfromwManualMonitor.comwManuals 

A4
Connecting the Display
Important
This illustration depicts the general model of connection. Your monitor may differ from
the items shown in the picture.
Do not carry the product upside down holding only the stand base. The product may
fall and get damaged or injure your foot.
Before setting up the monitor, ensure that the power to the monitor, the computer
system, and other attached devices is turned off.
Connecting the stand 
1.Place the monitor with its front facing downward on a soft cloth....

Connecting the Display
A5
Disassembling the stand
Type. A
1.Put a cushion or soft cloth on aflat
surface.
3.Pushing Latch inside, Take the stand base from stand body.
5.Pack up the product as shown in the picture.
4.Separate the stand using a screwdriver as shown in the picture.
Note: Please keep the 4 screws in an accessible place for future use.
2.Place the monitor face Down on
the cushion or soft cloth.
 

A6
Connecting the Display
Disassembling the stand
Type. B
1.Put a cushion or soft cloth on aflat
surface.
3.Change your hold on the product as it follows and turn the Stand Base in the arrow direction.
5.Pushing Latch inside, Take the stand
base from stand body.6.Pack up the product as shown in the
picture.
4.Pull out the Stand to remove.
2.Place the monitor face Down on
the cushion or soft cloth.
 

A7
Connecting the Display
20
Before setting up the monitor, ensure that the power to the monitor, the computer
system, and other attached devices is turned off. 
Positioning your display
1.Adjust the position of the panel in various ways for maximum comfort.
Tilt Range : -5˚~20˚                            
Ergonomic
It is recommended that in order to maintain an ergonomic and comfortable viewing
position, the forward tilt angle of the monitor should not exceed 5 degrees.
Swivel : 355˚   
 

A8
Using the Computer
1.Make sure to turn off the computer and product. Connect the cable as below sketch map
form to .1
2.Press        button on the front switch panel to turn the
power on. When monitor power is turned on, the 
Self Image Setting Function is executed automatically.
(Only Analog Mode)
2
Connecting the Display
Wall-outlet type
PC
PC
PC
MAC
Power CordAnalog signal
D-subDigital signal
DVI
A
B
C
Connect DVI Cable
Connect Dsub Cable (PC)
Connect Dsub Cable (Mac)
PC-outlet type
Mac adapterFor...

A9
Using the speakers - The feature is only for speaker models - L226WTM
Side Jack
Rear
AUDIO
IN
Headphone/Earphone Input 
Connects to the *LINE OUT jack of the
PC sound card.
*Line Out Speaker Out